GB/T 30505-2014 English PDF

US$299.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 30505-2014: Measure method for emission pollutants of exhaust gas of marine incinerator
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 30505-2014	299	Add to Cart	3 days	Measure method for emission pollutants of exhaust gas of marine incinerator	Valid

Similar standards

GB/T 37452   CB/T 4197   GB/T 11865   GB/T 38077   GB/T 34426.1   GB 31117   

Basic data

Standard ID: GB/T 30505-2014 (GB/T30505-2014)
Description (Translated English): Measure method for emission pollutants of exhaust gas of marine incinerator
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: U41
Classification of International Standard: 47.020.20
Word Count Estimation: 13,140
Date of Issue: 2/19/2014
Date of Implementation: 6/1/2014
Quoted Standard: GB/T 5468; GB/T 10836-2008; HJ/T 42; HJ/T 43; HJ/T 44; HJ/T 57; ISO 8217; IMO MPEC-76-40
Regulation (derived from): National Standard Announcement 2014 No. 2
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This Standard specifies the marine incinerator (referred incinerator) emissions from flue gas bench measurement conditions and instruments of measurement methods and results of calculations. This Standard applies to the heat capacity of the pollutants (CO

GB/T 30505-2014: Measure method for emission pollutants of exhaust gas of marine incinerator

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Measure method for emission pollutants of exhaust gas of marine incinerator ICS 47.020.20 U41 National Standards of People's Republic of China Marine incinerator flue gas emission measurement methods Issued on. 2014-02-19 2014-06-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Introduction Ⅲ 1 Scope 1 2 Normative references 1 3 measurement conditions and instrument 1 3.1 Measurement Condition 1 3.2 Measuring Instruments 2 4 Measurement 2 4.1 Measuring time 2 4.2 sampling requirements 3 4.3 Before test preparation 3 4.4 Measurement Process 4 5 measurements to calculate 4 Appendix A (informative) incinerator emissions measurement result recording table (solid waste incineration mode) 6 Annex B (informative) incinerator emissions measurement results are reported in Table (waste oil burning mode) 7 Annex C (informative) General combustion gas (smoke) physical properties 8 Reference 9 Figure 1 sampling probe mounting position diagram 3 Figure 2 Test flow chart Table A.1 incinerator emissions measurement result recording table (solid waste incineration mode) 6 Table B.1 incinerator emissions measurement results are reported in Table (waste oil burning mode) 7 Table C.1 General combustion gas (smoke) physical properties 8

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. The standard proposed by China State Shipbuilding Corporation. This standard by the National Marine Machinery Standardization Technical Committee (SAC/TC137) centralized. This standard was drafted. Nanjing ship Oasis Environmental Protection Co., Ltd. Nanjing Luzhou Machine ship, China Shipbuilding Industry Integrated Technology Surgery Institute of Economic Research, the Navy stationed in Nanjing Aerospace Electrical Systems Military Representative Office. The main drafters of this standard. Lihu Sheng, Chen Ji race, Lu Jing, Xia Weiping, Weihua Xing, Liang Pan high, Zhang Lijun. Marine incinerator flue gas emission measurement methods

1 Scope

This standard specifies the marine incinerator (the incinerator) emissions from flue gas measurement bench test conditions and instrumentation, measurement methods and measuring Calculation results. This standard applies to the heat capacity of pollutants (CO, NOx, SO2 and dust) in the following 1500kW incinerator flue gas emission concentration Degree of blackness and combustion oxygen (O2) concentration bench measurements, reference measurements on board use.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 5468 Smoke and Dust Test Methods GB/T 10836-2008 shipbuilding and marine technology Marine Incinerator Requirements Determination of UV HJ/T 42 Stationary source emission of nitrogen oxides spectrophotometry HJ/T 43 Stationary source emission-Determination of nitrogen oxides hydrochloride naphthylethylenediamine spectrophotometry Determination of HJ/T 44 stationary sources of carbon monoxide in the exhaust gas non-dispersive infrared absorption method Determination of HJ/T 57 stationary source emission of sulfur dioxide constant potential electrolysis ISO 8217 Petroleum products - Fuels (F grade) bunker fuel requirements IMOMPEC.76 (40) standard technical requirements for shipboard incinerators

3 measurement conditions and instrument

3.1 Measurement conditions 3.1.1 Test conditions 3.1.1.1 incinerator waste oil testing according to GB/T 10836-2008 specified in Appendix A.5 waste oil. a) 75% heavy fuel oil residue; b) 5% waste lubricating oil; c) 20% emulsified water. 3.1.1.2 testing waste incinerator according to GB/T 10836-2008 specified in Appendix A.5 solid waste (IMO02 grade). a) 50% of food waste; b) 50% refuse, including. 1) 30% of waste paper; 2) 40% of cardboard, wood and so on; 3) 10% rag; 4) 20% plastic. Solid waste should be above 50% and a water content of 7% incombustible solids. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 30505-2014_English be delivered?

Answer: Upon your order, we will start to translate GB/T 30505-2014_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 30505-2014_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 30505-2014_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.