GB/T 30476-2013 English PDF

US$214.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 30476-2013: Woodworking machines -- Single chain mortising machines -- Nomenclature and acceptance conditions
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 30476-2013	214	Add to Cart	3 days	Woodworking machines -- Single chain mortising machines -- Nomenclature and acceptance conditions	Valid

Similar standards

GB/T 41861   GB/T 40337   JB/T 13910.3   GB/T 30478   GB/T 30479   GB/T 30477   

Basic data

Standard ID: GB/T 30476-2013 (GB/T30476-2013)
Description (Translated English): Woodworking machines -- Single chain mortising machines -- Nomenclature and acceptance conditions
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J65
Classification of International Standard: 79.120.10
Word Count Estimation: 11,164
Quoted Standard: ISO 230-1-1996
Adopted Standard: ISO 7950-1985, IDT
Regulation (derived from): National Standards Bulletin 2013 No. 27
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the terms of each part of the chain uniaxial tongue and groove machine (hereinafter referred to as the machine), while referring to ISO 230-1-1996, provides for inspection of geometric precision machine tools, and given the appropr

GB/T 30476-2013: Woodworking machines -- Single chain mortising machines -- Nomenclature and acceptance conditions

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Woodworking machines.Single chain mortising machines.Nomenclature and cceptance conditions ICS 79.120.10 J65 National Standards of People's Republic of China Woodworking machines uniaxial chain mortise machine Nomenclature and (ISO 7950. 1985, IDT) Issued on. 2013-12-31 2014-10-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard uses the translation method identical with ISO 7950. 1985 "Chain uniaxial woodworking machines Tenon slot machines Nomenclature and acceptance conditions" (English Chinese Version). Consistency correspondence with international standards in this standard references of our standards are as follows. --- GB/T 17421.1-1998 Test code for machine tools - Part 1. under no-load or finishing conditions Geometric accuracy of machines (EqvISO 230-1.1996) For ease of use, this standard made the following editorial changes. Chapter 2 International Standard ISO /R230 to the official version of the International Standard ISO 230-1. The standard proposed by China Machinery Industry Federation. This standard by the National Woodworking Machine and Tool Standardization Technical Committee (SAC/TC84) centralized. This standard drafting unit. Woodworking Machine Tool Research Institute, Fuzhou, Weihai City Product Quality Supervision, Inspection, Minhou County Cheung Woodworking Machinery Factory, Jinhua City-Acer Co. furniture, Linhai City, Chau Machinery Co., Ltd., Guangdong Rui Asia Machinery Co., Ltd. Shaowu Zhenda Machinery Manufacturing has Limited liability company, Nantong country-wide Woodworking Machinery Manufacturing Co., Ltd. Drafters of this standard. Zheng Li, Juhong Xiang, Lin Wenxin Chen Yun root, Fan Qingping, Zhou Hua standard, Yang Hua, Liwen Xiao, Chen Guoquan. Woodworking machines uniaxial chain mortise machine Nomenclature and

1 Scope

This standard specifies the terms of each part of the chain uniaxial tenon slot machine (hereinafter referred to as machine tools), while referring to ISO 230-1.1996, defines the machine Geometric precision test bed, and given the appropriate tolerances for general use, general precision machine tools. This standard only requires that the machine accuracy test, does not apply to running test machine (such as vibration, unusual noise, reptiles and other parts of the seized Experience), does not apply to machine features test (such as speed, feed rate, etc.), these tests are generally advised to test for accuracy in front of the machine.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. ISO 230-1.1996 Test code for machine tools - Part 1. under no-load or finishing conditions Geometric accuracy of machines

3 Short Description

3.1 standard in all dimensions and tolerances are in millimeters. 3.2 This standard should be used with reference to ISO 230-1.1996, in particular the temperature rise test before the installation of the machine spindle and other moving parts, in order to And test methods. Gage error should not exceed 1/3 of the tolerance of the subject project. 3.3 standard geometric accuracy test order is given by the machine tool assembly sequence, which is not limited by the order of the actual inspection time. In order to facilitate Installation and testing of the seizure, inspection in any order. 3.4 Test Project selection is determined by the user, and in agreement with the manufacturer, clearly defined at the time of ordering the machine. 3.5 movement in the direction of the workpiece called longitudinal movement. 3.6 When determining the minimum conversion time measuring range is different tolerances specified in this standard on measuring range should be considered tolerance is 0.01 mm (see ISO 230-1.1996 in 2.311).

4 Terms

Tools - Terminology Figure 1 and Table 1. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 30476-2013_English be delivered?

Answer: Upon your order, we will start to translate GB/T 30476-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 30476-2013_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 30476-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.