GB/T 29513-2013 English PDFUS$299.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 29513-2013: Chemical analysis of ferric-containing dust and sludge by XRF -- Fused cast bead method Status: Valid
Basic dataStandard ID: GB/T 29513-2013 (GB/T29513-2013)Description (Translated English): Chemical analysis of ferric-containing dust and sludge by XRF -- Fused cast bead method Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: H11 Classification of International Standard: 77.040.99 Word Count Estimation: 13,129 Older Standard (superseded by this standard): GB/T 28292-2012 Partial Quoted Standard: GB/T 2007.2; GB/T 6379.2; GB/T 6730.68; GB/T 8170; GB/T 16597; JJG 810 Regulation (derived from): National Standards Bulletin 2013 No. 6 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the X-ray fluorescence spectrometry in iron-bearing dust composition principle, reagents and materials, instruments and equipment, samples, glass sample preparation, X-ray fluorescence analysis, test reports, precision, and so on. GB/T 29513-2013: Chemical analysis of ferric-containing dust and sludge by XRF -- Fused cast bead method---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Chemical analysis of ferric-containing dust and sludge by XRF.Fused cast bead method ICS 77.040.99 H11 National Standards of People's Republic of China Partially replace GB/T 28292-2012 Ferric Dust in X-ray fluorescence spectroscopy for chemical analysis Glass casting method Issued on. 2013-05-09 2014-02-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard replaces GB/T 28292-2012 "steel industry iron-bearing dust recycling and the use of technical specifications" in Appendix A. The standard proposed by China Iron and Steel Association. This standard by the National Steel Standardization Technical Committee (SAC/TC183) centralized. This standard was drafted. Baoshan Iron & Steel Co., Ltd., Metallurgical Industry Information Standards Institute. The main drafters of this standard. Jin Delong, Lu Xiaoming, Zhuoshang Jun, Chou Jinhui, Gao Jianping, Zhang Yi, Wang Jiang. Ferric Dust in X-ray fluorescence spectroscopy for chemical analysis Glass casting method1 ScopeThis standard specifies the principle of X-ray fluorescence spectrometry determination of iron dust and mud components, reagents and materials, instruments and equipment, samples, glass Preparation of glass samples, X-ray fluorescence spectroscopy, test reports, and other precision. This standard applies to iron, steel iron dust and mud of total iron, silicon dioxide, calcium oxide, magnesium oxide, aluminum oxide, titanium oxide, Manganese, X-ray fluorescence spectroscopy of phosphorus pentoxide and zinc oxide, the chemical composition of the simultaneous determination of nine kinds of measuring range in Table 1. Table 1 Measuring range Determination of the chemical composition range (mass fraction) /% TFe 30.0 ~ 75.0 SiO2 0.2 ~ 15.0 CaO 0.1 ~ 30.0 MgO 0.1 ~ 10.0 Al2O3 0.1 ~ 5.0 TiO2 0.02 ~ 5.0 MnO 0.02 ~ 5.0 P2O5 0.02 ~ 1.0 ZnO 0.02 ~ 10.02 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 2007.2 bulk minerals sampling and sample preparation General manual sample preparation method GB/T 6379.2 measurement methods and results of Accuracy (trueness and precision) - Part 2. Determine the standard measurement method to repeat Of the basic methods of reproduction GB/T 6730.68 ore loss on ignition - Gravimetric method GB/T 8170 repair value expressed about the rules and limit values and judgment GB/T 16597 metallurgical product analysis X-ray Fluorescence Spectrometry General JJG810 wavelength dispersive X-ray fluorescence spectrometer test procedures Principle 3 Sample anhydrous lithium tetraborate flux cast into glass samples, using the original level X-ray irradiation to produce the analyte from the sample in a glass ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 29513-2013_English be delivered?Answer: Upon your order, we will start to translate GB/T 29513-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 29513-2013_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 29513-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
