GB/T 29416-2012 English PDF

US$399.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 29416-2012: Test method for fire-resistant performance of external wall insulation systems applied to building facades
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 29416-2012	399	Add to Cart	3 days	Test method for fire-resistant performance of external wall insulation systems applied to building facades	Valid

Similar standards

GB/T 26784   GB 15930   GB 16840.2   GB 35181   GB 12955   GB 29415   

Basic data

Standard ID: GB/T 29416-2012 (GB/T29416-2012)
Description (Translated English): Test method for fire-resistant performance of external wall insulation systems applied to building facades
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: C82
Classification of International Standard: 13.220.50
Word Count Estimation: 17,122
Quoted Standard: GB/T 5907; GB/T 6343; GB/T 18404; GB/T 20284; GB/T 25181
Regulation (derived from): National Standards Bulletin 2012 No. 42; National Standards Commission recently released 16 national standards for fire protection
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the building external wall insulation system performance test fire terms and definitions, test equipment, sample conditioning, testing procedures, inspection after the test, the test results to determine and test reports. This stan

GB/T 29416-2012: Test method for fire-resistant performance of external wall insulation systems applied to building facades

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Test method for fire-resistant performance of external wall insulation systems applied to building facades ICS 13.220.50 C82 National Standards of People's Republic of China Fire performance of building exterior insulation system experiment method Issued on. 2012-12-31 2013-10-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. The reference standard preparation BS8414-1.2002 "fire performance of building external cladding systems - Part 1. Non-suitable for building surfaces Test methods "outer envelope bearing system. The standard proposed by the People's Republic of China Ministry of Public Security. This standard by the National Standardization Technical Committee member fire building fire resistance of the Technical Committee (SAC/TC113/SC8) centralized. This standard is drafted by. Ministry of Public Security in Tianjin Fire Research Institute. Participated in the drafting of this Standard. China Academy of Building Research, Ministry of Public Security of Sichuan Fire Research Institute, Beijing-profit high-tech Co., Ltd., Quan Chemical Co., Ltd. Shandong, China Polyurethane Industry Association. The main drafters of this standard. Wang Guohui, Tian Liang, Zhuo Ping, Zhang Xiaoying, Zhao Bi, Han Weiping, item Kai, Hu Shengli, Wu Yingjie, quaternary its wide, Zhao Gang Cui Ronghua, HUANG Zhen-li, Tang Lulin, Li Jianbo, Zhu Chunling, Jianqiang, Hu Teng, Zhang Zhimin. Fire performance of building exterior insulation system experiment method Warnings. organization and all those involved in this trial need watch out for hazards that may exist. There may be outside during the test Insulation system fully burn and produce toxic and (or) harmful fumes, fumes case, after the specimen installation, testing and implementation of clear test residue Management process mechanical hazards and dangerous operation may also occur. Therefore, laboratory testing personnel to be equipped with safety equipment and the corresponding Fire-fighting facilities, all potential hazards and assess the health risks and make safety notice. Test personnel make the necessary Training to ensure that staff follow safety procedures to operate.

1 Scope

This standard specifies the terms and definitions of the building exterior insulation system fire performance testing, test equipment, sample conditioning, the test drive Order, inspection after the test, the test results to determine and test reports. The fire performance test standard suitable for installation on non-load bearing exterior wall external insulation system. This standard does not apply to fire resistance test mounted on the outside of the building's exterior glass curtain wall insulation respiratory system.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 5907 fire first part basic terms GB/T 6343 and foam rubber Determination of apparent density GB/T 18404 sheathed thermocouple cables and thermocouples Monomer GB/T 20284 building materials and products of combustion test GB/T 25181 ready-mixed mortar

3 Terms and Definitions

GB/T 5907 defined by the following terms and definitions apply to this document. 3.1 Building exterior insulation system externalwalinsulationsystemsappliedtobuildingfacade The structures will adopt the provisions of various materials mounted on the outer surface of the external walls of the building, with a complete structural system of a certain insulation properties. 3.2 Level 1 level1 horizontal lines Located in the combustion chamber opening test level Level top line at the top of 2500mm. 3.3 Level 2 level2 horizontal lines Located in the combustion chamber opening test level Level top line at the top of 5000mm. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 29416-2012_English be delivered?

Answer: Upon your order, we will start to translate GB/T 29416-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 29416-2012_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 29416-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.