GB/T 28511.2-2023 English PDFUS$609.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 28511.2-2023: Integrated optical path devices based on planar lightwave circuit - Part 2: Dense wavelength division multiplexing(DWDM) filter based on arrayed waveguide grating(AWG) technology Status: Valid GB/T 28511.2: Historical versions
Basic dataStandard ID: GB/T 28511.2-2023 (GB/T28511.2-2023)Description (Translated English): Integrated optical path devices based on planar lightwave circuit - Part 2: Dense wavelength division multiplexing(DWDM) filter based on arrayed waveguide grating(AWG) technology Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: M33 Classification of International Standard: 33.180.20 Word Count Estimation: 30,374 Date of Issue: 2023-12-28 Date of Implementation: 2024-04-01 Older Standard (superseded by this standard): GB/T 28511.2-2012 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 28511.2-2023: Integrated optical path devices based on planar lightwave circuit - Part 2: Dense wavelength division multiplexing(DWDM) filter based on arrayed waveguide grating(AWG) technology---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. ICS 33:180:20 CCSM33 National Standards of People's Republic of China Replace GB/T 28511:2-2012 Planar optical waveguide integrated optical circuit device Part 2: Arrayed Waveguide Grating (AWG) Based Dense Wavelength Division Multiplexing (DWDM) Filters Published on 2023-12-28 2024-04-01 Implementation State Administration for Market Regulation Released by the National Standardization Administration Committee Table of contentsPreface III Introduction V 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Abbreviations 5 5 categories 5 6 Technical requirements 5 7 Test methods 12 8 Reliability test 15 9 Inspection Rules 17 10 Marking, packaging, transportation and storage18 Appendix A (Normative) AWG filter frequency/wavelength allocation schedule 19 Appendix B (informative) Thermal sensitive AWG filter electrical interface 21 Appendix C (informative) Thermal sensitive AWG filter outline diagram 22 Appendix D (informative) Thermal insensitive AWG filter outline diagram 23ForewordThis document complies with the provisions of GB/T 1:1-2020 "Standardization Work Guidelines Part 1: Structure and Drafting Rules of Standardization Documents" Drafting: This document is Part 2 of GB/T 28511 "Planar Optical Waveguide Integrated Optical Circuit Devices": GB/T 28511 has released the following part: ---Part 1: Optical power splitter based on planar optical waveguide (PLC); ---Part 2: Dense wavelength division multiplexing (DWDM) filters based on arrayed waveguide grating (AWG) technology: This document replaces GB/T 28511:2-2012 "Planar optical waveguide integrated optical circuit devices - Part 2: Arrayed waveguide grating based (AWG) technology Dense Wavelength Division Multiplexing (DWDM) filter", compared with GB/T 28511:2-2012, except for structural adjustments and editorial changes In addition, the main technical changes are as follows: a) Change the term "peak wavelength" to "center wavelength" (see 3:3, 3:3 in the:2012 version); b) Added the term and definition of "flatness" (see 3:6) and deleted "set temperature stability" (see 3:11 of the:2012 version); c) Changed the "Wavelength Accuracy", "Insertion Loss", "Bandwidth", "Adjacent Channel Crosstalk", "Non-Adjacent Channel Crosstalk" and Definition of the term “total crosstalk” (see 3:4, 3:5, 3:7, 3:8, 3:9, 3:10, 3:4, 3:5, 3:6, 3:7, 3:8, 3:9 of the:2012 edition); d) The operating wavelength of the C-band AWG filter has been changed [see 5:1, 4:1a) of the:2012 edition]; e) Increased the operating wavelength of C-band AWG filter (see 5:1); f) Changed the non-adjacent channel crosstalk and total crosstalk optical performance parameters of the 100GHz channel spacing flat-top thermally insensitive AWG filter Number (see Table 5, Table 3 of the:2012 edition); g) Added optical performance parameters of 50GHz channel spacing flat-top heat-sensitive AWG filter (see Table 3); h) Added optical performance parameters of 50GHz channel spacing flat-top thermally insensitive AWG filter (see Table 6); i) Added optical performance parameters of industrial-grade flat-top thermally insensitive AWG filter (see Table 7); j) Added optical performance parameters of industrial-grade single-fiber bidirectional flat-top thermally insensitive AWG filter (see Table 8); k) Added optical performance parameters of ultra-wide spectrum flat-top thermally insensitive AWG filter (see Table 9); l) Added requirements for extreme working conditions (see Table 10); m) The return loss tester in the test instrument is deleted (see 5:3:7 of the:2012 version); n) The reference standards, test conditions, and failure criteria of the reliability test have been changed, and environmental requirements have been added (see Chapter 8,:2012 version of 5:5); o) Delete dispersion and polarization mode dispersion in daily inspection (see 6:2:1 of the:2012 version); p) Added specific requirements for type inspection (see 9:3:2, 9:3:3, 9:3:4, 9:3:5, 9:3:6, 9:3:7); q) Added specific requirements for marking (see 10:1); r) Added specific requirements for storage (see 10:4); s) 8 frequencies/wavelengths have been added to the AWG filter frequency/wavelength allocation schedule (see Table A:1); t) Changed the signals and types defined by the AWG filter electrical interface (see Table B:1, Table B:1 of the:2012 version); u) Delete "50GHz channel spacing flat-top thermally insensitive AWG filter optical performance parameters" (see Appendix C of the:2012 version); v) Added "Thermal Insensitive AWG Filter Outline Diagram" (see Appendix D): Please note that some content in this document may be subject to patents: The publisher of this document assumes no responsibility for identifying patents: This document is proposed by the Ministry of Industry and Information Technology of the People's Republic of China: This document is under the jurisdiction of the National Communications Standardization Technical Committee (SAC/TC485): This document was drafted by: China Information and Communications Technology Group Co:, Ltd:, China Academy of Information and Communications Technology, China Telecom Group Co:, Ltd: China United Network Communications Group Co:, Ltd:, Shenzhen Xinfeitong Optoelectronics Technology Co:, Ltd:, and Shenzhen Dongyan Communication Technology Co:, Ltd: The main drafters of this document: Ling Jiuhong, Luo Yong, Cao Li, Ma Weidong, Zhao Wenyu, Zhang Dezhi, Shen Shikui, Ma Guangpeng, Xu Qiushuang: The previous versions of this document and the documents it replaces are as follows: ---First published as GB/T 28511:2-2012 in:2012; ---This is the first revision:IntroductionPlanar optical waveguide integrated optical circuit device is a core device of optical communication information technology: The device is manufactured based on planar optical waveguide technology and can be implemented It now distributes and transmits the power and wavelength of light wave signals: At present, we mainly develop planar optical waveguide optical power splitters and array waveguides: Develop standards for planar optical waveguide integrated devices such as gratings (AWG) and wavelength division multiplexing (DWDM) filters to unify and standardize planar optical waveguides The key parameters of integrated devices are conducive to promoting the standardized development of the industrial chain related to planar optical waveguide integrated devices in my country: GB/T 28511 "Flat Planar Optical Waveguide Integrated Optical Circuit Devices" aims to standardize the technical requirements, test methods, reliability tests, and inspection rules for planar optical waveguide integrated optical circuit devices: and requirements for marking, packaging, transportation and storage, etc:, and is planned to be composed of two parts: ---Part 1: Optical power splitter based on planar optical waveguide (PLC): The purpose is to specify planar optical waveguide optical power splitters Technical requirements, test methods, reliability tests, inspection rules and marking, packaging, transportation and storage: ---Part 2: Dense wavelength division multiplexing (DWDM) filters based on arrayed waveguide grating (AWG) technology: The purpose is to stipulate Technical requirements, test methods, reliability tests, and inspection regulations for arrayed waveguide grating (AWG) wavelength division multiplexing (DWDM) filters regulations, as well as marking, packaging, transportation and storage: Planar optical waveguide integrated optical circuit device Part 2: Arrayed Waveguide Grating (AWG) Based Dense Wavelength Division Multiplexing (DWDM) Filters1 ScopeThis document defines dense wavelength division multiplexing (DWDM) filters based on arrayed waveguide grating (AWG) technology (hereinafter referred to as "AWG filter") terms and definitions; stipulates classification, technical requirements, reliability testing, inspection rules, marking, packaging, transportation and storage Requirements; corresponding test methods are described: This document applies to the design, development, and production of dense wavelength division multiplexing (DWDM) filters based on arrayed waveguide grating (AWG) technology: and inspection:2 Normative reference documentsThe contents of the following documents constitute essential provisions of this document through normative references in the text: Among them, the dated quotations For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all modifications) applies to this document: document: GB/T 191 Packaging, storage and transportation pictorial mark GB/T 2828:1 Enumeration sampling inspection procedures Part 1: Batch-by-batch inspection sampling plan retrieved by acceptance quality limit (AQL) GB/T 20440-2006 Dense wavelength division multiplexer/demultiplexer technical conditions GB/T 26125 Determination of six restricted substances (lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls and polybrominated diphenyl ethers) in electronic and electrical products GB/T 26572-2011 Limit requirements for restricted substances in electronic and electrical products GB/T 33768-2017 Reliability test method for optoelectronic devices for communications SJ/T 11364-2014 Labeling requirements for restricted use of hazardous substances in electronic and electrical products cations:DWDMfrequencygrid)3 Terms and definitionsThe terms and definitions defined in GB/T 20440-2006 and the following apply to this document: 3:1 Planar optical waveguides formed based on the principle of interference integrate dense wavelength division multiplexing devices: Note 1: Abbreviated as AWG filter: Note 2: Its basic structure consists of three parts: input/output waveguide array, flat waveguide and curved waveguide array, as shown in Figure 1: ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 28511.2-2023_English be delivered?Answer: Upon your order, we will start to translate GB/T 28511.2-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 28511.2-2023_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 28511.2-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 28511.2-2023?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 28511.2-2023 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
