GB/T 2828.3-2008 English PDFUS$534.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 2828.3-2008: Sampling procedures for inspection by attributes -- Part 3: Skip-lot sampling procedures Status: Valid
Basic dataStandard ID: GB/T 2828.3-2008 (GB/T2828.3-2008)Description (Translated English): Sampling procedures for inspection by attributes -- Part 3: Skip-lot sampling procedures Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: A41 Classification of International Standard: 03.120.30 Word Count Estimation: 27,217 Date of Issue: 2008-07-16 Date of Implementation: 2009-01-01 Older Standard (superseded by this standard): GB/T 13263-1991 Quoted Standard: GB/T 2828.1-2003; ISO 3534-1-2006; ISO 3534-2-2006 Adopted Standard: ISO 2859-3-2005, IDT Regulation (derived from): Academy of Mathematics and Systems Science Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the count of skip-lot acceptance testing in general sampling procedures. The purpose of these procedures is to supply-side with satisfactory quality assurance system and effective quality control of the submitted quality products provide a way to reduce the amount of testing. By reducing the amount of the test to a predetermined probability. Random testing may determine whether to grant by the test that is to be submitted by the receiver. These procedures will have been used to GB/T 2828. 1 random sample units drawn on the principle of promotion to a random sample of the batch. This section provided for skip-lot sampling procedures applicable to (but not limited to) the following tests: 1. final product, such as whole or part, 2. components and raw materials. GB/T 2828.3-2008: Sampling procedures for inspection by attributes -- Part 3: Skip-lot sampling procedures---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Sampling procedures for inspection by attributes Part 3. Skip-lot sampling procedures ICS 03.120.30 A41 National Standards of People's Republic of China GB/T 2828.3-2008/ISO 2859-3.2005 Replacing GB/T 13263-1991 Sampling procedures for inspection Part 3. skip-lot sampling procedures (ISO 2859-3.2005, IDT) Posted 2008-07-16 2009-01-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released Table of ContentsIntroduction Ⅲ 1 Scope 1 2 Normative references 1 3 Terms, definitions and symbols 1 3.1 Terms and definitions 1 3.2 Symbols and Abbreviations 2 4 3 General requirements 5 supplier qualification and product identification 3 5.1 Supplier Qualification 3 5.2 Product Qualification 4 5.3 Qualification Score 4 Example 6 5.4 product qualification 6 6 jump lot sampling procedures 6.1 General 6 6.2 Initial inspection frequency hopping and determine 8 6.3 Inspection frequency hopping and change 8 Drawing and inspection procedures 6.4 sampling plan, batch (state 2 and state 3) 11 6.5 Batch interrupt jump 12 6.6 Qualification requalification 12 6.7 Disqualification 13 products 6.8 Supplier disqualification and suspension 13 Responsibility for the party's 13 7 8 inspection agencies and departments responsible for liability 14 8.1 General 14 Responsibility 8.2 pairs supplier qualification 14 8.3 Other liability 14 9 coherence and coordination with the GB/T 2828.1 15 9.1 limit 15 9.2 Relationship with reduced inspection 15 10 Additional Information 15 Design Basis 10.1 15 Statistical properties of the batch program to jump 10.2 15 Appendix A (normative) agreed before the qualification requirements of the optional 17 Appendix B (normative) prescribed inspection frequency hopping randomly selected batch procedures 18 Annex C (informative) decided to jump batch inspection or reduced inspection factor 19 References 20 GB/T 2828.3-2008/ISO 2859-3.2005ForewordGB/T 2828 "Sampling procedures for inspection" now includes the following sections, the structure and the corresponding international standards and national standard will be replaced Quasi is. --- Part 1. by acceptance quality limit (AQL) retrieval batch inspection sampling plan (ISO 2859-1.1999, IDT; instead of GB/T 2828-1987) --- Part 2. Press the limiting quality (LQ) for isolated lot inspection retrieved sampling programs (ISO 2859-2. 1985, NEQ; instead of GB/T 15239-1994) --- Part 3. skip-lot sampling procedures (ISO 2859-3.2005, IDT; instead of GB/T 13263-1991) --- Part 4. claiming that the level of quality assessment procedures (ISO 2859-4.2002, MOD; instead of GB/T 14437-1997 and GB/T 14162-1993) --- Part 5. by acceptance quality limit (AQL) retrieval batch sequential sampling inspection plan system (corresponding to ISO 2859-5.2005) --- Part 10. Sampling system description (corresponding to ISO 2859-10.2006) --- Part 11. Small claims overall level of quality assessment procedures (instead of GB/T 15482-1995) This section GB/T 2828 Part 3. This section GB/T 2828 equivalent international standards ISO 2859-3.2005 "Sampling procedures for inspection - Part 3. Skip Lot pumping Sample program "on the ISO 2859-3.2005, made the following corrections. --- 6.3.4 Example 3 in the "Batch 14 is received by the test" corrected to "have been tested 11 batches are received." This Part replaces GB/T 13263-1991 "skip - lot sampling inspection procedures." This portion of the GB/T 13263-1991, compared Changes in technical content include. --- Canceled services, data, or records management procedures in the scope of application; --- Used for GB/T 2828.1 limit sampling program are more detailed provisions allowing the use of the first number of the received value (Not "#") multiple sampling plan; --- Introduction of the concept of qualification score is used to determine the eligibility verification, inspection frequency change jump, jump check interrupt, disqualification and re-qualification Identification, etc., instead of GB/T 13263-1991 Table 1 and Table 2, the received installment minimum cumulative sample size and to determine the number of Claim; --- The "in 10 batches within the membership requalification unsuccessful, the product will be canceled qualification jump batch" with "within six batches without further accreditations Successful, the product will be canceled jump granted qualification "; --- Added Appendix A and Appendix B. Appendix A of this section and Appendix B are normative appendixes; Annex C is informative appendix. This part of the application by the National Standardization Technical Committee on statistical methods and focal points. Drafting this Part. Mathematics and System Sciences, Chinese Academy of Sciences, China National Institute of Standardization, the PLA gunsmiths Cheng Institute. The main drafters of this section. Feng Shi Yong, Dingwen Xing, Wang Haiying, YU Zhen Fan, Great Ideals, Zhang Yuzhu, Xiao Hui. This part of the standard replaces the previous editions are. --- GB/T 13263-1991. GB/T 2828.3-2008/ISO 2859-3.2005 Sampling procedures for inspection Part 3. skip-lot sampling procedures1 ScopeThis section GB/T 2828 specifies the hop count general acceptance testing of the batch sampling procedures. The purpose of these procedures is to have satisfied High-quality products supplier's quality assurance system and effective quality control submitted to provide a way to reduce the amount of testing. Amount of test By reducing the probability is predetermined, randomly determined whether the batch test may not be submitted by the test that is to be received. These programs will have spent In GB/T 2828.1 extended to extract the principle of randomly selected batches of random sample units. This section GB/T 2828 as provided for skip-lot sampling procedures apply to (but not limited to) the following test. --- End products, such as whole or part; --- Components and raw materials; --- WIP.2 Normative referencesThe following documents contain provisions which, through reference to GB/T 2828 to the present, constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated references, the latest version applies to This section. GB/T 2828.1-2003 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch test sample Programme (ISO 2859-1.1999, IDT) ISO 3534-1.2006 Statistics Vocabulary and symbols - Part 1. General statistical terms and terms used in probability ISO 3534-2.2006 Statistics Vocabulary and symbols - Part 2. Applied Statistics 3 Terms, definitions and symbols GB/T 2828.1-2003, ISO 3534-1.2006 and ISO 3534-2.2006, and established the following terms, definitions and symbols applicable For this part of GB/T 2828's. For ease of reference, certain terms are taken directly from the above criteria. 3.1 Terms and Definitions 3.1.1 Production at a steady rate of production. NOTE. If the production has a predetermined frequency production (see 5.2.1) continued for a predetermined period of production, can be considered to be continuous. Continuous production is considered Manufacturing or assembly process of a stabilizing factor. 3.1.2 Disqualified jump batch sampling (3.1.11) of. 3.1.3 Responsible for inspection and qualification of an independent third party. GB/T 2828.3-2008/ISO 2859-3.2005 ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 2828.3-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 2828.3-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 2828.3-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 2828.3-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
