GB/T 28203-2011 English PDF

US$489.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 28203-2011: Technical requirements and test methods of furniture connectors
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 28203-2011	489	Add to Cart	4 days	Technical requirements and test methods of furniture connectors	Valid

Similar standards

QB/T 2189   QB/T 2454   GB 24977   GB/T 38467   GB/T 26696   

Basic data

Standard ID: GB/T 28203-2011 (GB/T28203-2011)
Description (Translated English): Technical requirements and test methods of furniture connectors
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: Y82
Classification of International Standard: 97.140
Word Count Estimation: 21,292
Date of Issue: 2011-12-30
Date of Implementation: 2012-09-01
Quoted Standard: GB/T 1931-2009; GB/T 2828.1-2003; GB/T 3325-2008; GB/T 6135.3-2008; GB/T 13667.1-2003
Regulation (derived from): Announcement of Newly Approved National Standards No. 23 of 2011
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the furniture fittings terms and definitions, classification, requirements, test methods, inspection rules and signs, instructions for use, packaging, transportation and storage. This standard applies to the connections between components of furniture components, including triple eccentric connector, insert the tenon, furniture, L-shaped fittings, shelves eccentric fittings, shelf pin (folder), brackets, shelves and other support from the connect fixation furniture components, furniture fittings other forms may refer to.

GB/T 28203-2011: Technical requirements and test methods of furniture connectors

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Technical requirements and test methods of furniture connectors ICS 97.140 Y82 National Standards of People's Republic of China Fittings technical requirements and test methods for furniture Issued on. 2011-12-30 2012-09-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Introduction Ⅲ 1 Scope 1 2 Normative references 1 3 Terms and definitions 4 Product Category 2 5 Requirement 2 6 Test Method 4 7 Inspection rules 14 8 signs, instructions for use, packaging, transportation and storage 15 Appendix A (informative) schematic diagram of the mounting hole 17

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. Please note that some of the content of this document may involve patents. Release mechanism of the present document does not assume responsibility for the identification of these patents. The standard proposed by China National Light Industry Council. This standard by the National Standardization Technical Committee furniture (SAC/TC480) centralized. This standard is drafted by. Zhejiang Furniture & Hardware Institute, Zhejiang Nanxun wood product quality inspection center detection, Guangdong Smart Furniture Components Co., Ltd. An Disi. Participated in the drafting of this standard. Zhejiang Unicom Furniture Parts Co., Ltd., Hangzhou Johnson Hardware Furniture Co., Ltd., the Shanghai Quality Supervision Inspection Technology Research Institute, Shenzhen Academy of Metrology and Quality Inspection, Cheng Feng Furniture (China) Co., Ltd. Kunshan good boy children have Limited, Guangdong crown-Technology Limited. The main drafters of this standard. Zhao Xingang, Mega Liang, Chen Xi Xi, should the new law, Xu Jun, Zhang Shuyan, Huo Taian, Wu Jianrong, Chen Dechang, Heshan Xiang, Su Jing, Zhang Argentine, Wang Yong, Wang Xiaoping, Zhu, Wang satellite, Xu Jun. Fittings technical requirements and test methods for furniture

1 Scope

This standard specifies the terms and definitions for furniture fittings, classification, requirements, test methods, inspection rules and signs, instructions for use, package Loading, transport and storage. This standard applies to member connection between furniture parts, including triple eccentric connector, insert the tenon, furniture L-shaped connector, partial laminates Heart fittings, shelf pin (clip), brackets, shelf supports and other furniture for fixing the connecting member, other forms of furniture fittings can participate According to the Executive.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 1931-2009 Method for determination of moisture content of wood GB/T 2828.1-2003 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch test sample plan GB/T 3325-2008 Metal furniture general technical conditions GB/T 6135.3-2008 straight shank twist drills - Part 3. Straight shank twist types and dimensions GB/T 13667.1-2003 steel shelves General technical conditions

3 Terms and Definitions

The following terms and definitions apply to this document 3.1 Triple eccentric connector tripleconnector By the eccentric body attachment screw, furniture screw fixed with a nut embedded common eccentric connections, see Figure 1. Figure 1 triple eccentric connecting member 3.2 Plug tenon tenon By inserting the connector combination approach. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 28203-2011_English be delivered?

Answer: Upon your order, we will start to translate GB/T 28203-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 28203-2011_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 28203-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.