Home Cart Quotation About-Us
www.ChineseStandard.net
SEARCH

GB/T 27748.2-2022 PDF English

US$980.00 · In stock · Download in 9 seconds
GB/T 27748.2-2022: Stationary fuel cell power system - Part 2: Performance test methods
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid

GB/T 27748.2: Historical versions

Standard IDUSDBUY PDFDeliveryStandard Title (Description)Status
GB/T 27748.2-2022980 Add to Cart Auto, 9 seconds. Stationary fuel cell power system - Part 2: Performance test methods Valid
GB/T 27748.2-2013810 Add to Cart Auto, 9 seconds. Stationary fuel cell power systems -- Part 2: Performance test methods Obsolete

Similar standards

GB/T 27748.3   GB/T 27748.1   GB/T 27748.4   GB/T 31036   

GB/T 27748.2-2022: Stationary fuel cell power system - Part 2: Performance test methods

---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT27748.2-2022
NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 27.070 CCS K 82 GB/T 27748.2-2022 / IEC 62282-3-200.2015 Replacing GB/T 27748.2-2013 Stationary fuel cell power system - Part 2.Performance test methods (IEC 62282-3-200.2015, Fuel cell technologies - Part 3-200.Stationary fuel cell power systems - Performance test methods, IDT) Issued on. MARCH 09, 2022 Implemented on. OCTOBER 01, 2022 Issued by. State Administration for Market Regulation; Standardization Administration of the PRC.

Table of Contents

Foreword... 4 Introduction... 6 1 Scope... 7 2 Normative references... 8 3 Terms, definitions, operating process and symbols... 12 3.1 Terms and definitions... 12 3.2 Operating process... 19 3.3 Symbols... 20 4 Reference conditions... 24 4.1 General... 24 4.2 Temperature and pressure... 24 4.3 Heating value base... 24 5 Item of performance test... 24 6 Test preparation... 25 6.1 General... 25 6.2 Uncertainty analysis... 25 7 Measurement instruments and measurement methods... 26 7.1 General... 26 7.2 Measurement instruments... 26 7.3 Measurement methods... 27 8 Test plan... 38 8.1 General... 38 8.2 Ambient conditions... 39 8.3 Maximum permissible variation in steady-state operating conditions... 39 8.4 Test operating procedure... 40 8.5 Duration of test and frequency of readings... 41 9 Test methods and computation of test results... 41 9.1 General... 41 9.2 Efficiency test... 41 9.3 Electric power and thermal power response characteristics test... 59 9.4 Start-up and shutdown characteristics test... 65 9.5 Purge gas consumption test... 70 9.6 Water consumption test (optional)... 71 9.7 Exhaust gas emission test... 71 9.8 Noise level test... 73 9.9 Vibration level test... 74 9.10 Discharge water quality test... 75 10 Test reports... 76 10.1 General... 76 10.2 Title page... 76 10.3 Table of contents... 77 10.4 Summary report... 77 10.5 Detailed report... 77 10.6 Full report... 78 Annex A (Normative) Uncertainty analysis... 79 Annex B (Normative) Calculation of fuel heating value... 83 Annex C (Normative) Reference gas... 87 Annex D (Informative) Maximum acceptable instantaneous power output transient 90 Bibliography... 91

Foreword

This document is drafted in accordance with GB/T 1.1-2020 "Directives for standardization - Part 1.Rules for the structure and drafting of standardizing documents". The document is Part 2 of GB/T 27748 "Stationary fuel cell power system". GB/T 27748 has issued the following parts. - Part 1.Safety; - Part 2.Performance test methods; - Part 3.Installation; - Part 4.Performance test methods for small fuel cell power systems. This document replaces GB/T 27748.2-2013 "Stationary fuel cell power systems - Part 2.Performance test methods". Compared with GB/T 27748.2-2013, in addition to structural adjustment and editorial changes, the main technical changes are as follows. - Delete the terms and definitions of "Audible noise level", "Emission characteristics", "Parasitic load", "Pressure", "Secondary thermal power", and "Standby state (idle state)" (see 3.1.1, 3.1.8, 3.1.18, 3.1.21, 3.1.25, and 3.1.29 of the 2013 edition); - Add terms and definitions of "External thermal energy", "Noise level", "Pre- generation state", "Rated power", "Total power input", and "Waste water" (see 3.1.7, 3.1.14, 3.1.20, 3.1.22, 3.1.33, and 3.1.35); - Add the content of operating process (see 3.2); - Modify some test contents in Table 2 (see Table 2; Table 2 of the 2013 edition); - Delete "Exhaust gas flow measurement" and "Hydrogen concentration measurement" (see 7.3.7 and 7.3.7.9 of the 2013 edition); - Add requirements for gas sampling (see 7.3.7.1); - Modify "Audible noise level measurement" to "Noise level test" (see 7.3.9; 7.3.9 of the 2013 edition); - Add criteria for attaining the steady-state set value (see 9.3.2); - Add requirements for maximum acceptable instantaneous power output transient (see Annex D). This document is identical to IEC 62282-3-200.2015 "Fuel cell technologies - Part 3- 200.Stationary fuel cell power systems - Performance test methods". The following editorial change has been made to this document. - Change the standard name to "Stationary fuel cell power system - Part 2. Performance test methods". Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. The issuing authority of this document shall not be held responsible for identifying any or all such patent rights. This document was proposed by China Electrical Equipment Industry Association. This document shall be under the jurisdiction of National Technical Committee 342 on Fuel Cell and Flow Battery of Standardization Administration of China (SAC/TC 342). Drafting organizations of this document. North China Electric Power University; Guangzhou Yunqing Testing Technology Co., Ltd.; Shanghai Shenli Technology Co., Ltd.; Dalian Institute of Chemical Physics, Chinese Academy of Sciences; Nanjing University; Wuhan University of Technology; Tongji University; Tsinghua University; China Quality Certification Centre; Machinery Industry Beijing Electrotechnical Institute of Economic Research; Wuxi Institution of Supervision & Testing on Product Quality; Shenzhen Institute of Standards and Technology; Shanghai Pearl Hydrogen Energy Technology Co., Ltd.; Xinyan Hydrogen Energy Technology Co., Ltd.; Weichai Power Co., Ltd.; Yutong Bus Co., Ltd.; Beijing Long March Tian Min Hi-Tech Co., Ltd.; Nekson Power Technology Co., Ltd.; China Automotive Technology and Research Center Co., Ltd.; No. 712 Research Institute of China Shipbuilding Industry Corporation; Global Energy Interconnection Research Institute Co., Ltd.; Great Wall Motor Co., Ltd. Baoding Hydrogen Testing Branch; Weifu High-Technology Group Co., Ltd.; China Automotive Engineering Research Institute Co., Ltd.; Haidriver (Qingdao) Energy Technology Co., Ltd.; Shanghai Hydrogen Propulsion Technology Co., Ltd.; Tianjin University. Main drafters of this document. Liu Jianguo, He Wenxiang, Wang Gang, Qi Zhigang, Yu Hongmei, Hou Ming, Tan Jinting, Ma Tiancai, Pei Pucheng, Zhang Liang, Zhou Bin, Chen Yao, Wang Yiqun, Dong Hui, Pan Fengwen, Jiang Shangfeng, Jin Yinshi, Hou Xiangli, Hao Dong, Ye Donghao, Liang Danxi, Duan Zhijie, Zhang Yihuang, Mao Zhanxin, Xie Jiaping, Chen Pei, Chen Guanyi, Ma Wenchao. The previous editions of this document and the documents it replaces are as follows. - It was first issued in 2013 as GB/T 27748.2-2013; - This is the first revision.

1 Scope

This document covers operational and environmental aspects of the stationary fuel cell power systems (hereinafter referred to as "power systems") performance. This document applies to the following test methods.

2 Normative references

The contents of the following documents, through normative references in this text, constitute indispensable provisions of this document. Among them, for dated references, only the edition corresponding to that date applies to this document. For undated references, the latest edition (including all amendments) applies to this document. ISO 3648 Aviation fuels - Estimation of net specific energy

3 Terms, definitions, operating process and symbols

For the purposes of this document, the following terms and definitions apply. Mechanical oscillations caused by the environment that affect vibration level readings.

4 Reference conditions

The heating value of fuel is based on the lower heating value (LHV) in principle. Energy efficiency is expressed as follows.

5 Item of performance test

The performance assessment of the power systems shall be considered from the following two points of view.

6 Test preparation

An uncertainty analysis shall be performed on the four test items below to indicate the reliability of the test results and to comply with customer requests. The following test results shall be analysed to determine the absolute and relative uncertainty. A test shall be planned so that the reliability of the results can be evaluated for the following items.

7 Measurement instruments and measurement methods

The electric power measurement may be used to calculate the electric energy over the test duration.

8 Test plan

The maximum permissible variations over the test duration are given in Table 4. The maximum permissible variations in Table 4 do not apply for start-up and shutdown testing. The appropriate duration and frequency of readings are determined according to the type of power system tested. A sufficient number of measurements and number of measurement sets shall be established on the basis of requirements for data fluctuations, stability of average values and the uncertainty analysis of this document.

9 Test methods and computation of test results

The average gaseous fuel input may be described either as the volumetric flow rate of fuel, qVf0 in m3/s, or as the mass flow rate of fuel, qmf in kg/s. Vibration produced by the power system shall be measured through the operating sequence (from start-up, rated load to shutdown) in accordance with 7.3.10 to find the maximum vibration level. ......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Image 1     Image 2     Image 3     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of English version of GB/T 27748.2-2022 be delivered?Answer: The full copy PDF of English version of GB/T 27748.2-2022 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.

Question 2: Can I share the purchased PDF of GB/T 27748.2-2022_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 27748.2-2022_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 27748.2-2022 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.

Question 5: Should I purchase the latest version GB/T 27748.2-2022?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 27748.2-2022 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.

How to buy and download a true PDF of English version of GB/T 27748.2-2022?

A step-by-step guide to download PDF of GB/T 27748.2-2022_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 27748.2-2022".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3    Steps 4~6    Step 7    Step 8    Step 9