GB/T 27748.1-2017 PDF EnglishUS$690.00 · In stock · Download in 9 seconds
GB/T 27748.1-2017: Stationary fuel cell power systems -- Part 1: Safety Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid GB/T 27748.1: Historical versions
Similar standardsGB/T 27748.1-2017: Stationary fuel cell power systems -- Part 1: Safety---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT27748.1-2017GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 27.070 K 82 GB/T 27748.1-2017 / IEC 62282-3-100:2012 Replacing GB/T 27748.1-2011 Stationary fuel cell power systems - Part 1: Safety (IEC 62282-3-100:2012, Fuel cell technologies - Part 3-100: Stationary fuel cell power systems - Safety, IDT) ISSUED ON: JULY 31, 2017 IMPLEMENTED ON: FEBRUARY 01, 2018 Issued by: General Administration of Quality Supervision, Inspection and Quarantine of the PRC; Standardization Administration of the PRC. Table of ContentsForeword ... 3 Introduction ... 5 1 Scope ... 7 2 Normative references ... 8 3 Terms and definitions ... 11 4 Safety requirements and protective measures ... 19 5 Type tests ... 51 6 Routine tests ... 80 7 Marking, labelling and packaging ... 81 Annex A (Informative) Significant hazards, hazardous situations and events dealt with in this standard ... 91 Annex B (Informative) Carburization and material compatibility for hydrogen service ... 93 Annex NA (Informative) China’s documents which have a consistent correspondence with the international documents normatively referenced in this Part ... 101 Bibliography ... 105ForewordGB/T 27748 "Stationary fuel cell power systems" is divided into the following 4 parts: - Part 1: Safety; - Part 2: Performance test methods; - Part 3: Installation; - Part 4: Performance test methods for small fuel cell power systems. This Part is Part 1 of GB/T 27748. This Part is drafted in accordance with the rules given in GB/T 1.1-2009. This Part replaces GB/T 27748.1-2011 "Stationary fuel cell power system - Part 1: Safety". Compared with GB/T 27748.1-2011, the main technical changes are as follows: - On the whole, reorganize the safety requirements part; - The main modification is to put forward electrical safety requirements for internal components; - Clarify a large number of requirements and test methods, especially pressure leakage and strength tests; - Expand the wind tests part; - ADD condensate discharge and air leakage tests. This Part, using translation method, is identical to IEC 62282-3-100:2012 "Fuel cell technologies - Part 3-100: Stationary fuel cell power systems - Safety". China’s documents which have a consistent correspondence with the international documents normatively referenced in this Part are given in Annex NA. This Part was proposed by China Electrical Equipment Industry Association. This Part shall be under the jurisdiction of National Technical Committee 342 on Fuel Cell and Flow Battery of Standardization Administration of China (SAC/TC 342). Drafting organizations of this Part: Suzhou UL-CCIC Co., Ltd.; Machinery Stationary fuel cell power systems - Part 1: Safety1 ScopeThis Part of GB/T 27748 is the product safety standard. It applies to stationary packaged, self-contained fuel cell power systems or fuel cell power systems comprised of factory matched packages of integrated systems which generate electricity through electrochemical reactions. This Part applies to systems - intended for electrical connection to mains direct, or with a transfer switch, or to a standalone power distribution system; - intended to provide AC or DC power; - with or without the ability to recover useful heat; - intended for operation on the following input fuels a) natural gas and other methane rich gases derived from renewable (biomass) or fossil fuel sources, for example, landfill gas, digester gas, coal mine gas; b) fuels derived from oil refining, for example, diesel, gasoline, kerosene, liquefied petroleum gases such as propane and butane; c) alcohols, esters, ethers, aldehydes, ketones, Fischer-Tropsch liquids and other suitable hydrogen-rich organic compounds derived from renewable (biomass) or fossil fuel sources, for example, methanol, ethanol, di- methyl ether, biodiesel; d) hydrogen, gaseous mixtures containing hydrogen gas, for example, synthesis gas, town gas. This Part does not cover: - micro fuel cell power systems; - portable fuel cell power systems; - propulsion fuel cell power systems. Note: For special application such as “marine auxiliary power”, additional requirements may be given by the relevant marine ship register standard. This Part is applicable to stationary fuel cell power systems intended for indoor and outdoor commercial, industrial and residential use in non-hazardous (unclassified) areas. This standard contemplates all significant hazards, hazardous situations and events, with the exception of those associated with environmental compatibility (installation conditions), relevant to fuel cell power systems, when they are used as intended and under the conditions foreseen by the manufacturer. This standard deals with conditions that can yield hazards on the one hand to persons, and on the other to damage outside the fuel cell system only. Protection against damage to the fuel cell system internals is not addressed in this standard, provided it does not lead to hazards outside the fuel cell system. The requirements of this standard are not intended to constrain innovation. When considering fuels, materials, designs or constructions not specifically dealt with in this standard, these alternatives shall be evaluated as to their ability to yield levels of safety and performance equivalent to those prescribed by this standard.2 Normative referencesThe following documents are indispensable for the application of this document. For the dated references, only the editions with the dates indicated are applicable to this document. For the undated references, the latest edition (including all the amendments) are applicable to this document. GB/T 4208-1993 Degrees of protection provided by enclosure (IP code) (IEC 60529:1989, IDT) IEC 60079-0 Explosive atmospheres - Part 0: Equipment - General requirements IEC 60079-2 Explosive atmospheres - Part 2: Equipment protection by pressurized enclosure “p” IEC 60079-10 Explosive atmospheres - Part 10: Classification of areas IEC 60079-29-1 Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases IEC 60079-30-1 Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements IEC 60204-1 Safety of machinery - Electrical equipment of machines - Part 1: General requirements IEC 60335-1:2010 Household and similar electrical appliances - Safety - Part 1: General requirements IEC 60335-2-51 Household and similar electrical appliances - Safety - Part 2-51: Particular requirements for stationary circulation pumps for heating and service water installations IEC 60417 Graphical symbols for use on equipment IEC 60730-1 Automatic electrical controls for household and similar use - Part 1: General requirements IEC 60730-2-5 Automatic electrical controls for household and similar use - Part 2-5: Particular requirements for automatic electrical burner control systems IEC 60730-2-6 Automatic electrical controls for household and similar use - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements IEC 60730-2-9 Automatic electrical controls for household and similar use - Part 2-9: Particular requirements for temperature sensing controls IEC 60950-1 Information technology equipment - Safety - Part 1: General requirements IEC 61000-3-2 Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic currents emissions (equipment input current ≤16 A per phase) IEC 61000-3-3 Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low- voltage supply systems, for equipment with rated current ≤16 A per phase and not subject to conditional connection IEC 61000-3-4 Electromagnetic compatibility (EMC) - Part 3-4: Limits - Limitation of emission of harmonic currents in low-voltage power supply systems for equipment with rated current greater than 16 A IEC 61000-3-5 Electromagnetic compatibility (EMC) - Part 3-5: Limits - Limitation of voltage fluctuations and flicker in low-voltage power supply systems for equipment with rated current greater than 75 A IEC 61000-3-11 Electromagnetic Compatibility (EMC) - Part 3-11: Limits - Limitation of voltage changes voltage fluctuations and flicker in public low- voltage supply systems - Equipment with rated current ≤75 A and subject to conditional connection ISO 10442 Petroleum, chemical and gas service industries - Packaged, integrally geared centrifugal air compressors ISO 12499 Industrial fans - Mechanical safety of fans - Guarding ISO 13631 Petroleum and natural gas industries - Packaged reciprocating gas compressors ISO 13707 Petroleum and natural gas industries - Reciprocating compressors ISO 13709 Centrifugal pumps for petroleum, petrochemical and natural gas industries ISO 13849-1 Safety of machinery - Safety related parts of control systems - Part 1: General principles for design ISO 13850 Safety of machinery - Emergency stop - Principles for design ISO 14847 Rotary positive displacement pumps - Technical requirements ISO 15649 Petroleum and natural gas industries - Piping ISO 16111 Transportable gas storage devices - Hydrogen absorbed in reversible metal hydride ISO 23550 Safety and control devices for gas burners and gas-burning appliances - General requirements ISO 23551-1 Safety and control devices for gas burners and gas-burning appliances - Particular requirements - Part 1: Automatic valves ISO 23553-1 Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Shut-off devices for oil burners ISO 26142 Hydrogen detection apparatus - Stationary applications3 Terms and definitionsFor the purposes of this document, the following terms and definitions apply. 3.1 Accessible Area to which, under normal operating conditions, one of the following applies: a) access can be gained without the use of a tool; ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 27748.1-2017 be delivered?Answer: The full copy PDF of English version of GB/T 27748.1-2017 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 27748.1-2017_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 27748.1-2017_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 27748.1-2017 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.Question 5: Should I purchase the latest version GB/T 27748.1-2017?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 27748.1-2017 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.How to buy and download a true PDF of English version of GB/T 27748.1-2017?A step-by-step guide to download PDF of GB/T 27748.1-2017_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 27748.1-2017". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
