GB/T 27692-2024 English PDFUS$199.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 27692-2024: Iron pellets for blast furnaces Status: Valid GB/T 27692: Historical versions
Basic dataStandard ID: GB/T 27692-2024 (GB/T27692-2024)Description (Translated English): Iron pellets for blast furnaces Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: D31 Classification of International Standard: 73.060.10 Word Count Estimation: 10,122 Date of Issue: 2024-04-25 Date of Implementation: 2024-11-01 Older Standard (superseded by this standard): GB/T 27692-2011 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 27692-2024: Iron pellets for blast furnaces---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.ICS 73:060:10 CCSD31 National Standards of People's Republic of China Replaces GB/T 27692-2011 Iron Pellets for Blast Furnace Released on 2024-04-25 2024-11-01 Implementation State Administration for Market Regulation The National Standardization Administration issued ForewordThis document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for standardization work Part 1: Structure and drafting rules for standardization documents" Drafting: This document replaces GB/T 27692-2011 "Acidic iron pellets for blast furnace": Compared with GB/T 27692-2011, in addition to the structural adjustment In addition to editorial changes, the main technical changes are as follows: a) The scope has been changed and the scope of non-application has been clarified (see Chapter 1, Chapter 1 of the:2011 edition); b) Added the terms and definitions of “iron pellets”, “flux iron pellets”, “basic iron pellets” and “magnesian iron pellets” (see 3:4, 3:6, 3:7 and 3:8), the definition of "acidic iron pellets" has been changed (see 3:5, 3:4 of the:2011 edition); c) Added a chapter on “Classification and Grade” (see Chapter 4); d) The chemical composition requirements of iron ore pellets have been changed (see Table 1, Table 1 of the:2011 edition); e) The metallurgical property requirements of iron ore pellets have been changed (see Table 2, Table 1 of the:2011 edition); f) Changed the physical property requirements of iron ore pellets (see Table 3, Table 2 of the:2011 edition); g) The chemical analysis method of ingredients has been changed (see 6:1 to 6:6, 5:1 to 5:6 of the:2011 edition); h) Added "alkalinity" and "magnesium oxide content" as routine inspection items (see 7:3); i) The numerical rounding method has been changed (see 7:6, 6:6 of the:2011 edition): Please note that some of the contents of this document may involve patents: The issuing organization of this document does not assume the responsibility for identifying patents: This document was proposed by the China Iron and Steel Association: This document is under the jurisdiction of the National Iron Ore and Direct Reduced Iron Standardization Technical Committee (SAC/TC317): This document was drafted by: Shougang Group Co:, Ltd:, Shougang Jingtang United Iron and Steel Co:, Ltd:, Yangzhou Taifu Special Materials Co:, Ltd: Shaoxing Shangyu Hongxing Machinery and Instrument Manufacturing Co:, Ltd:, Huaning Kanghong Pellet Industry and Trade Co:, Ltd:, Lianyungang Xingxin Steel Co:, Ltd: Co:, Ltd:, Tangshan Branch of Hebei Iron and Steel Co:, Ltd:, and Metallurgical Industry Information Standards Research Institute: The main drafters of this document are: Qinggele Jirigele, Wu Zhaohui, Tian Yunqing, Zhao Zhixing, An Gang, Wang Kai, Chen Zibin, Yang Tao, Wu Xiaojiang, Dong Xiangjuan, Li Jinsong, Li Jianhua, Li Ming, Ma Li, Qian Ruiqing, Zhao Luyao, Liu Wenwang, Sun Dawei, Ma Chengwei, Xu Rongguang, Huang Zhen, Wu Nanyong, Zhang Guanlai, Chen Jin, Ma Cunkang, Wang Tiantian, Ma Kairan, Wang Yuanting, Zheng Guizeng, Cao Shuzhi, Gao Yan: This document was first published in:2011 and this is the first revision: Iron Pellets for Blast Furnace1 ScopeThis document specifies the classification and grade, technical requirements, test methods, inspection rules, packaging, transportation, storage and quality of iron ore pellets for blast furnaces: Quantity certificate: This document applies to iron pellets for blast furnaces produced from iron concentrate or iron ore fines (referred to as "iron pellets"): This document does not apply to special iron pellets produced from vanadium, titanium, rare earths, chromium, etc:2 Normative referencesThe contents of the following documents constitute the essential clauses of this document through normative references in this document: For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document: GB/T 6730:5 Determination of total iron content in iron ore - Titration method after reduction with titanium trichloride GB/T 6730:9 Determination of silicon content in iron ore - Ammonium ferrous sulfate reduction-silicon molybdenum blue spectrophotometric method GB/T 6730:10 Determination of silicon content in iron ore - Gravimetric method GB/T 6730:13 Determination of calcium and magnesium content in iron ore - EGTA-CyDTA titration method GB/T 6730:14 Determination of calcium content in iron ore - Flame atomic absorption spectrometry GB/T 6730:16 Determination of sulfur content in iron ore - Barium sulfate gravimetric method GB/T 6730:17 Determination of sulfur content in iron ore - Combustion iodine method GB/T 6730:18 Determination of phosphorus content in iron ore - Molybdenum blue spectrophotometric method GB/T 6730:19 Determination of phosphorus content in iron ore - Bismuth phosphomolybdenum blue spectrophotometric method GB/T 6730:20 Determination of phosphorus content in iron ore - Titration method GB/T 6730:61 Determination of carbon and sulfur content in iron ore - High frequency combustion infrared absorption method GB/T 6730:62 Determination of calcium, silicon, magnesium, titanium, phosphorus, manganese, aluminum and barium contents in iron ore - Wavelength dispersive X-ray fluorescence spectrometry GB/T 6730:63 Determination of aluminum, calcium, magnesium, manganese, phosphorus, silicon and titanium content in iron ore - Inductively coupled plasma optical emission spectrometry GB/T 6730:65 Determination of total iron content in iron ore - Titanium trichloride reduction potassium dichromate titration method (conventional method) GB/T 6730:66 Determination of total iron content in iron ore - Automatic potentiometric titration method GB/T 6730:70 Determination of total iron content in iron ore - Stannous chloride reduction titration method GB/T 6730:73 Determination of total iron content in iron ore - EDTA photometric titration method GB/T 6730:74 Determination of magnesium content in iron ore - Flame atomic absorption spectrometry GB/T 8170 Rules for rounding off values and expression and determination of limit values GB/T 10322:1 Iron ore sampling and sample preparation methods GB/T 10322:7 Sieving determination of particle size distribution of iron ore and direct reduced iron GB/T 13240 Determination of free expansion index of iron ore pellets for blast furnace GB/T 13241 Determination of the reducibility of iron ore GB/T 13242 Iron ore low temperature pulverization test - Method using cold drum after static reduction GB/T 14201 Determination of compressive strength of iron pellets for blast furnace and direct reduction GB/T 20565 Terminology of iron ore and direct reduced iron ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 27692-2024_English be delivered?Answer: Upon your order, we will start to translate GB/T 27692-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 27692-2024_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 27692-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 27692-2024?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 27692-2024 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
