GB/T 27545-2024 English PDFUS$359.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 27545-2024: Horizontal circulating mechanical parking system Status: Valid GB/T 27545: Historical versions
Basic dataStandard ID: GB/T 27545-2024 (GB/T27545-2024)Description (Translated English): Horizontal circulating mechanical parking system Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: J80 Classification of International Standard: 53.020.99 Word Count Estimation: 18,160 Date of Issue: 2024-09-29 Date of Implementation: 2025-04-01 Older Standard (superseded by this standard): GB/T 27545-2011 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 27545-2024: Horizontal circulating mechanical parking system---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.National Standard of the People's Republic of China ICS 53.020.99CCS J 80 Horizontal circulation mechanical parking equipment 2024-09-29 Release 2025-04-01 Implementation State Administration for Market Regulation The National Standardization Administration issued Replaces GB/T 27545-2011 Table of ContentsPreface Ⅲ 1 Scope...1 2 Normative references ...1 3 Terms and Definitions 2 4 Type, basic parameters and models...2 4.1 Type 2 4.2 Basic parameters 3 4.3 Model ...3 5 Technical requirements 3 5.1 Environmental conditions for use 3 5.2 Design and Configuration 3 5.3 Overall performance 4 5.4 Manufacturing 4 5.5 Installation ...5 5.6 Security 6 5.7 Surface coating 7 6 Test methods 7 6.1 Test conditions 7 6.2 Visual inspection 7 6.3 Maximum entry/exit time for a single vehicle...7 6.4 No-load test 7 6.5 Rated load test 7 6.6 Static load test 8 6.7 Dynamic load test 8 6.8 Lifting speed and lowering speed 8 6.9 Rated operating speed 8 6.10 Power supply phase loss and phase error protection function 8 6.11 Determination of grounding resistance 8 6.12 Determination of insulation resistance 8 6.13 Leveling Accuracy 9 6.14 Safety protection device test 9 6.15 Noise ...10 6.16 Determination of paint film adhesion 10 7 Inspection Rules...10 7.1 Inspection classification 10 7.2 Factory Inspection 10 7.3 Type inspection 10 8 Marking, packaging, transportation and storage...12 8.1 Logo 12 8.2 Packaging 12 8.3 Transportation and storage 12 References ...13ForewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting is required. This document replaces GB/T 27545-2011 "Horizontal circulation type mechanical parking equipment". Compared with GB/T 27545-2011, In addition to structural adjustments and editorial changes, the main technical changes are as follows. -- Added the term "horizontal circulation type mechanical parking equipment" and its definition (see 3.1); --Changed the type of parking equipment (see 4.1, 4.1 of the.2011 edition); --Changed the model representation method of parking equipment (see 4.3.1, 4.3 of the.2011 edition); -- Changed the marking examples for parking equipment (see 4.3.2, 4.4 of the.2011 edition); --Changed the requirements for the corresponding use environment of parking equipment (see 5.1, 5.1 of the.2011 edition); --Changed the design and configuration of parking facilities (see 5.2, 5.2 of the.2011 edition); --Changed the maximum entry/exit time and storage capacity of a single vehicle (see 5.2.3, 4.2.2 of the.2011 edition); --Added the whole machine performance requirements (see 5.3); --Changed the mechanical property requirements for the materials of the main load-bearing structural parts of metal structures (see 5.4.1.1, 5.3.1.1 of the.2011 edition); --Changed the requirements for welds and bolt connection strength (see 5.4.1.2, 5.4.1.3, 5.3.1.2, 5.3.1.3 of the.2011 edition); --Changed the level of rust removal requirements (see 5.4.1.4, 5.3.1.4 of the.2011 edition); -- Changed the technical requirements for brakes (see 5.4.2.3, 5.3.2.3 of the.2011 edition); -- Changed the electrical design requirements (see 5.4.3, 5.3.3 of the.2011 edition); -- Deleted the horizontal circulation mechanism and elevator of parts (see 5.3.2.5.1 and 5.3.2.5.4 of the.2011 edition); --Added requirements for connectors of metal structures (see 5.5.1); --Changed the height difference and straightness requirements of the same section of two running tracks (see 5.5.4, 5.4.5 of the.2011 edition); --Deleted the relevant requirements for operation (see 5.5 of the.2011 edition); --Added requirements for equipment safety signs and hazard pictograms (see 5.6.2); --Added the function of exchanging cars by moving the loading plate horizontally after the lifting platform is lifted to the right position and when changing positions in the conversion area Safety requirements (see 5.6.7); --Changed the surface coating (see 5.7, 5.7 of the.2011 edition); --Deleted the overload operation test (see 5.8 of the.2011 edition); --The test conditions have been changed (see 6.1, 6.1 of the.2011 edition); --The visual inspection method has been changed (see 6.2, 6.2 of the.2011 edition); --Changed the method for determining the maximum entry/exit time of a single vehicle (see 6.3, 6.3.4 of the.2011 edition); --The no-load test has been changed (see 6.4, 6.3.1 of the.2011 edition); -- Changed the rated load test (see 6.5, 6.3.2 of the.2011 edition); --Added static load test (see 6.6); --The dynamic load test has been changed (see 6.7, 6.3.3 of the.2011 edition); --Increased lifting speed and lowering speed (see 6.8); --Increased rated operating speed (see 6.9); -- The braking system function of the drive mechanism has been deleted (see 6.4.14 of the.2011 edition); --Changed the power supply phase loss and phase error protection function (see 6.10, 6.4.15 of the.2011 edition); --Added the method for measuring ground resistance (see 6.11); --Added the determination method of insulation resistance (see 6.12); --Added the method for determining the leveling accuracy (see 6.13); --The interlocking function between the elevator and the horizontal circulation mechanism has been changed (see 6.14.14, 6.4.13 of the.2011 edition); --The inspection items have been changed (see Table 4, Table 4 of the.2011 edition); -- Changed the relevant requirements for labeling, packaging, transportation and storage (see Chapter 8, Chapter 8 of the.2011 edition). Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document was proposed by the China Machinery Industry Federation. This document is under the jurisdiction of the National Technical Committee for Standardization of Lifting Machinery (SAC/TC 227). This document was drafted by. Jiangsu Puteng Intelligent Technology Co., Ltd., Beijing Hoisting and Conveying Machinery Design and Research Institute Co., Ltd., Qingdao Huatong Ishikawajima Parking Equipment Co., Ltd., Beijing Kezhengping Engineering Technology Testing Institute Co., Ltd., Zhejiang Radium Meng Technology Co., Ltd., Shenzhen Shenzhen Weichuang Automation Equipment Co., Ltd., Hangzhou Dazhong Boao Technology Co., Ltd., Nanjing Special Equipment Safety Supervision and Inspection Research Institute, Shenzhen CIMC Intelligent Parking Co., Ltd., China Construction Science and Engineering Group Smart Parking Technology Co., Ltd., Shandong Laigang TEDA Garage Co., Ltd., Qingdao Qixing Garage Co., Ltd., Zhejiang Noli Garage Equipment Manufacturing Co., Ltd., Xi'an Special Equipment Inspection and Testing Institute, Anhui Hongjie Will Garage Car Equipment Co., Ltd., Changzhi Changqing Technology Co., Ltd., Anhui Kaixuan Intelligent Parking Equipment Co., Ltd., Shenzhen Huiche Intelligent Technology Co., Ltd. Co., Ltd., Shanghai Huachen Stereoscopic Garage Group Co., Ltd., Ningxia Special Equipment Inspection and Testing Institute, and Zhejiang Botong Intelligent Equipment Co., Ltd. The main drafters of this document are. Yao Xin, Wang Dan, Shen Linbo, Zhao Chunhui, Zhang Bingshuai, Tao Tianhua, Meng Chencan, Lin Weitong, Wu Yanzheng, Wang Huifang, Xie Lanping, Liang Lexian, Jiang Guanye, Qin Shengxiang, Wang Chaojie, Ma Lixin, Liang Ming, Mu Shengyong, Wu Houtuan, Li Kun, Li Xin, Liu Rui, Li Heping, Shu Zijian. The previous versions of this document and the documents it replaces are as follows. --First published in.2011 as GB/T 27545-2011; --This is the first revision. Horizontal circulation mechanical parking equipment1 ScopeThis document specifies the terms and definitions, types, basic parameters and models, technical requirements, tests and Methods, inspection rules, marking, packaging, transportation and storage. This document applies to horizontal circulation mechanical parking equipment defined in GB/T 26476.2 Normative referencesThe contents of the following documents constitute the essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document. GB/T 699-2015 High-quality carbon structural steel GB/T 700-2006 Carbon structural steel GB/T 1228 High strength large hexagon head bolts for steel structures GB/T 1229 High strength large hexagon nuts for steel structures GB/T 1230 High strength washers for steel structures GB/T 1231 Technical requirements for high-strength large hexagon head bolts, large hexagon nuts and washers for steel structures GB/T 3632 Torsion shear type high strength bolt connection for steel structure GB/T 6417.1 Classification and description of defects in metal fusion welds GB/T 8923.1-2011 Surface preparation of steel materials before coating - Visual assessment of surface cleanliness - Part 1.Uncoated The rust level and treatment level of the steel surface after the original coating is completely removed GB/T 9286-2021 Paint and varnish cross-cut test GB/T 9799 Metallic and other inorganic coatings - Treated zinc coatings on iron and steel GB/T 13306 Labels GB/T 13384 General technical requirements for packaging of electromechanical products GB/T 13912 Technical requirements and test methods for hot-dip galvanized coatings on metallic coatings of steel products GB/T 19418 Guide to quality classification of defects in arc welded steel joints GB/T 26476 Terminology of Mechanical Parking Equipment GB/T 26559-2021 Classification of mechanical parking equipment GB/T 37910.1-2019 Acceptance levels for non-destructive testing of welds by radiographic testing Part 1.Steel, nickel, titanium and their alloys GB/T 39980-2021 Mechanical parking equipment design specification GB/T 44354 General rules for safety signs and hazard pictorial symbols for parking equipment GB 50017 Steel Structure Design Standard GB 50168 Construction and acceptance standard for cable lines for electrical installation projects GB 50169 Specification for construction and acceptance of grounding devices for electrical installation projects GB 50254 Specification for construction and acceptance of low voltage electrical appliances for electrical installation projects GB 50256 Electrical installation engineering crane electrical installation construction and acceptance specification JB/T 10559-2018 Nondestructive testing of lifting machinery - Ultrasonic testing of steel welds ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 27545-2024_English be delivered?Answer: Upon your order, we will start to translate GB/T 27545-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 27545-2024_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 27545-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 27545-2024?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 27545-2024 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
