GB/T 27410-2010 English PDFUS$719.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 27410-2010: Technical specification for laboratories of testing hazardous substances in consumer products Status: Obsolete
Basic dataStandard ID: GB/T 27410-2010 (GB/T27410-2010)Description (Translated English): Technical specification for laboratories of testing hazardous substances in consumer products Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: A00 Classification of International Standard: 03 120 20 Word Count Estimation: 18,135 Date of Issue: 2011-01-14 Date of Implementation: 2011-07-01 Quoted Standard: GB/T 8170-2008; GB/Z 20288; GB/T 27025-2008 Regulation (derived from): National Standard Approval Announcement 2011 No.203 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the consumer products testing laboratory hazardous substances shall meet the technical requirements, including personnel, facilities and environment, sample management, split samples and preparation, equipment, detection methods and method validation and other key sectors. This standard applies to electrical and electronic products, household textiles, toys, decoration materials and furniture and other consumer products in five categories of toxic and hazardous substances testing laboratories. Toxic and hazardous substances and other applicable testing laboratories can refer to this standard. GB/T 27410-2010: Technical specification for laboratories of testing hazardous substances in consumer products---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Technical specification for laboratories of testing hazardous substances in consumer products ICS 0312020 A00 National Standards of People's Republic of China Consumer products toxic and hazardous substances detection Laboratory technical specifications Issued on. 2011-01-14 2011-07-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released Table of ContentsIntroduction Ⅲ Introduction Ⅳ 1 Scope 1 2 Normative references 1 3 Terms and definitions 4 persons 1 5 2 facilities and the environment 6 Sample Management 3 7 split sample preparation and pre-treatment 3 8 Equipment 3 9 Reagents and Standards 4 10 test methods and method validation 4 11 5 Measurement Traceability 12 5 Measurement Uncertainty 13 records and inspection reports 5 14 quality control test results 7 15 waste disposal 7 16 security requirements 8 Appendix A (informative) laboratory infrastructure design requirements 9 Annex B (informative) consumer products detect hazardous substances commonly used laboratory equipment 11 Annex C (informative) consumer products commonly used hazardous substances testing laboratory equipment and recommended calibration interval During the verification requirements 12 References 13ForewordThis standard is based on the consumer products toxic and hazardous substances detection characteristics of the GB/T 27025-2008 "testing and calibration laboratories General requirements for capacity, "the supplement or refined. The Standard Appendix A, Appendix B, Appendix C is informative appendix. This standard certification and accreditation by the National Standardization Technical Committee (SAC/TC261) and focal points. This standard is drafted by. China Quality Certification Center. Participated in the drafting of this standard are. China National Accreditation Committee, Kunshan City Product Quality Supervision, Inspection, the People's Republic of China Exit Inspection and Quarantine and the State Beijing, Zhejiang Institute of Quality and Technical Supervision and Inspection, People's Republic of China Ningbo Entry-Exit Inspection and Quarantine Bureau of Jiangsu CIQ Electrical Products Testing Center, Shenzhen, measuring Detection Technology Co., Ltd., PONY Test Technology (Beijing) Co., The company, Shanghai Measurement and Testing Technology Research Institute, in recognition Intentia (Suzhou) Co., Ltd. Detection Technology, CSTC Standards Technical Services Co., Intertek Intertek Testing Services Limited Shanghai. The main drafters of this standard. Jiang Wenbo, CAO, Chenxiao Zhen, Liu Lai Fu, Ma Qiju, Zhou Jie, GAO Hui-ming, Chen Wei, Caoguo Zhou, Lu Quanrong, XUE Jian, Qian Feng, Song Wei, Xu, Chen Jianguo, Wang Hu, Jia true, Liu Ying, Liu Yanbin, Wang Hailong.IntroductionWith the improvement of scientific and technological level and the level of industrial production, consumer products and the number of species is growing rapidly. Consumer Products The presence of hazardous substances influence the health of consumers, the destruction of human living environment. Meanwhile, as people's health and safety ring Paul growing awareness around the world continue to introduce relevant laws and regulations, consumer products community for hazardous substances testing requirements Increasing. Planning and construction, technical capacity, laboratory management directly affects the quality of laboratory testing, through our existing Investigation of consumer products, hazardous substances testing laboratories and analysis and comparison of the status quo, combined with our existing labs of similar people Staffing, instrumentation, management, etc., in order to regulate hazardous substances testing laboratory construction and daily operation of consumer products, Management formulated standards. Consumer products, hazardous substances testing laboratories shall meet the GB/T 27025-2008 "testing and calibration laboratory capacity through With the requirements "requirements, and recommend the use of this standard. This standard is also available as an authorized institution of such laboratory accreditation basis. Consumer products toxic and hazardous substances detection Laboratory technical specifications1 ScopeThis standard specifies the consumer products hazardous substances testing laboratories shall meet the technical requirements, including personnel, facilities and the environment, Sample management, resolution and sample preparation, equipment, test methods and method validation and other key aspects. This standard applies to electrical and electronic products, household textiles, toys, furniture and decoration materials and other consumer products in five categories have toxic Hazardous substances testing laboratories. Other suitable toxic and harmful substances testing laboratories can refer to this standard.2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 8170-2008 revised value represents about rules and limit values and judgment GB /Z20288 hazardous substances in electrical and electronic products in the test sample resolution General requirements General requirements GB/T 27025-2008 testing and calibration laboratories3 Terms and DefinitionsThe following terms and definitions apply to this standard. 3.1 Consumer products consumerproducts To meet the needs of members of society life products sold. The standard refers to consumer products including electrical and electronic products, household Textiles, toys, decoration materials and furniture. 3.2 Toxic and hazardous substances hazardoussubstances Relevant laws and regulations prescribed for health and the environment from potentially harming chemicals. 3.3 Waste wastesubstances Sample handling and laboratory waste materials generated during the detection. 3.4 Sample split sampledisjointment Using conventional tools necessary to disassemble the product to prepare a sample for chemical analysis process. 3.5 Measurement Uncertainty measurementuncertainty Characterization reasonably be attributed to the dispersion of the parameters, and results of a measurement of the value of the associated.4 people4.1 qualifications and ability 4.1.1 The laboratory equipment in operation, chemical testing, results of the evaluation, sensory evaluation report issued assay development and formulation, et al. ...... |
