GB/T 27069-2025 English PDF

US$199.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 27069-2025: Guidelines for the mutual recognition evaluation of product conformity assessment results
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 27069-2025	199	Add to Cart	3 days	Guidelines for the mutual recognition evaluation of product conformity assessment results	Valid

Similar standards

GB/T 27207   GB/T 27400   GB/T 27025   GB/T 27060   GB/T 27067   

Basic data

Standard ID: GB/T 27069-2025 (GB/T27069-2025)
Description (Translated English): Guidelines for the mutual recognition evaluation of product conformity assessment results
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: A00
Classification of International Standard: 03.120.20
Word Count Estimation: 10,113
Date of Issue: 2025-03-28
Date of Implementation: 3/28/2025
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 27069-2025: Guidelines for the mutual recognition evaluation of product conformity assessment results

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 03.120.20 CCSA00 National Standard of the People's Republic of China Evaluation Guidelines for Mutual Recognition of Product Conformity Assessment Results State Administration for Market Regulation The National Standardization Administration issued

Table of contents

Preface III Introduction IV 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Principles of mutual recognition and evaluation 2 4.1 Non-discrimination 2 4.2 Fairness 2 4.3 Mutual benefit and win-win situation 2 5 General Principles of Mutual Recognition Evaluation 2 6 Mutual recognition of evaluation methods 2 6.1 Overview 2 6.2 Quantitative measurement method 2 6.3 Technical Analysis Methods 2 6.4 Difference processing method 3 7 Mutual recognition of evaluation process and results 3 7.1 Mutual recognition feasibility assessment 3 7.2 Mutual recognition of equivalence evaluation 4 References 5

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting. Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document is proposed and coordinated by the National Technical Committee for Certification and Accreditation of Standardization (SAC/TC261). This document was drafted by. Certification and Accreditation Technology Research Center of the State Administration for Market Regulation, the State Administration for Market Regulation, China Inspection and Quarantine Agency Shenzhen Institute of Standards and Technology, China Railway Inspection and Certification Center Co., Ltd., China Quality Certification Center Co., Ltd. Company, China Certification and Accreditation Association, China Classification Society Quality Certification Co., Ltd., Fangyuan Mark Certification Group Co., Ltd., Weikai Certification and Testing Co., Ltd. Ltd., Weikai Testing Technology Co., Ltd., Beijing Huace Food and Agriculture Certification Service Co., Ltd., Shenzhen University, Eurofins Analytical Testing and Certification (Chengdu) Co., Ltd., Zhongweibiao (Beijing) Certification Center Co., Ltd., Measurement and Metrology Research Institute (Shandong) Group Co., Ltd., Food and Drug Environmental Inspection Research Institute (Shandong) Group Co., Ltd., China Innovation Sea (Tianjin) Certification Service Co., Ltd., and Shenzhen UBTECH Robotics Co., Ltd. The main drafters of this document are. Wu Haiwen, Lin Feng, Wang Maohua, Chen Zhifeng, Wang Jiao, Hao Xin, Wang Xuesheng, Rong Rong, Yue Yan, Jia Zhiyang, Wei Bing, Wan Rongrong, Wang Yaning, Zheng Xiaoyan, Liang Qiaoling, Qi Kunkun, Ma Zhijun, Ling Honghao, Liu Weili, Zhang Yanhong, Leng Bo, Zhou Xin, Sun Xuewen, Xie Jun, Ma Zihan.

Introduction

Conformity assessment is an internationally accepted and socially common quality management method and trade facilitation tool. Its essential attribute is to "transmit trust, serve Development. As my country's economy shifts from high-speed growth to high-quality development, a new development pattern with domestic circulation as the main focus and domestic and international dual circulation will be established. The market players’ demands for mutual recognition of conformity assessment results and the ways of cooperation are becoming more diverse and rich. Mutual recognition has been extended from the traditional three levels of countries, accreditation bodies and certification bodies to cross-regional alliances, regional alliances, and self- trade zone alliance, civil society or a link in the supply chain. In the face of the extended need for mutual recognition of conformity assessment results at different levels, this document analyzes and summarizes the conformity assessment results at multiple channels and levels. The feasibility and equivalence of mutual recognition provide guidance for achieving mutual recognition cooperation at different levels, thereby promoting the signing or cooperation of relevant agreements. The recognition and acceptance of quality assessment results will promote trade facilitation. Evaluation Guidelines for Mutual Recognition of Product Conformity Assessment Results

1 Scope

This document provides the evaluation principles, general principles, methods, process and results for mutual recognition of product conformity assessment results. guide. This document applies to evaluation activities carried out by relevant parties for mutual recognition of product conformity assessment results.

2 Normative references

The contents of the following documents constitute essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document. GB/T 27020 Operational requirements for various types of inspection bodies for conformity assessment GB/T 27025 General requirements for the competence of testing and calibration laboratories GB/T 27065 Requirements for certification bodies for conformity assessment products, processes and services GB/T 27068 Agreement on the recognition and acceptance of conformity assessment results

3 Terms and definitions

The terms and definitions defined in GB/T 27020, GB/T 27025, GB/T 27065 and GB/T 27068 and the following terms and definitions apply to this document. 3.1 Confirmation that specified requirements relating to the product are met. Note. The definition of products includes services. 3.2 Demonstration of evidence that the relevant regulatory requirements are met. 3.3 mutual recognition Mutual Recognition The relevant organizations involved in the conformity assessment activities recognize or jointly agree on the product conformity assessment results of other participants. Note. Joint recognition can be the implementation of the same technical regulations, standards, technical solutions, the designation of other participants or the authorization of corresponding qualifications, in a legally binding document. The document clearly recognizes the conformity assessment results of other participants and the acceptance of the supplier's self-declaration, etc. 3.4 evaluationevidence Records, statements of fact, or other information that are relevant to the evaluation process and can be verified. 3.5 Evaluation Group The collection of all parties involved in the mutual recognition evaluation of a product's conformity assessment results. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 27069-2025_English be delivered?

Answer: Upon your order, we will start to translate GB/T 27069-2025_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 27069-2025_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 27069-2025_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.