GB/T 27023-2008 English PDFUS$134.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 27023-2008: Methods of indicating conformity with standards for third-party certification systems Status: Valid
Basic dataStandard ID: GB/T 27023-2008 (GB/T27023-2008)Description (Translated English): Methods of indicating conformity with standards for third-party certification systems Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: A00 Classification of International Standard: 03.120.20 Word Count Estimation: 7,744 Date of Issue: 2008-05-06 Date of Implementation: 2008-10-01 Quoted Standard: GB/T 20000.1-2002 Adopted Standard: ISOIEC Guide 23-1982, IDT Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the criteria and standards referenced in the document of compliance representation. It is mainly for standards compliance, is also applicable to other technical specification compliance. It is suitable for certification bodies authorized representation made ??under compliance. GB/T 27023-2008: Methods of indicating conformity with standards for third-party certification systems---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Methods of indicating conformity with standards for third-party certification systems ICS 03.120.20 A00 National Standards of People's Republic of China Third-party certification system standard Compliance representation (ISO /IEC Guide23. 1982, IDT) Posted 2008-05-06 2008-10-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis standard is identical with ISO /IEC Guide 23. 1982, "third-party certification system standards compliance representation." ISO /IEC Guide 23. 1982 is the International Organization for Standardization (ISO ) Certification Committee (CERTICO) draft standard. Certification Board (CERTICO) in 1985 It was renamed the Committee on Conformity Assessment (CASCO). For ease of use, the standards were appropriate editorial changes. --- After the introduction to the standard advance preface, before; Title --- Chapter 1 from "The scope and field" with "" and the title of the second chapter from "references" to "normative cited With the file "heading in Chapter 3 of the" definition "to" Terms and Definitions "; --- Increase Normative references of "key words"; --- Deletion of two related ISO /IEC described in Chapter 1 "ISO /IEC Guide 23 is mainly used for international standards, but can also be used National standards or other purposes. "And Chapter 8," a provision indicating compliance (mark of conformity and certificate of conformity) To International standards demand due to country, legal or other reasons, may not be using all of ISO or IEC members. " This standard certification and accreditation by the National Standardization Technical Committee (SAC/TC261) and focal points. This standard was drafted. China Quality Certification Center, the National Certification and Accreditation Regulatory Commission, China National Accreditation committee Council CQM Group, Shenzhen Electronic Product Quality Testing Center, Guangzhou Daily electrical detection by the Shanghai Quality Supervision, Inspection Technology Research Study hospital. The main drafters of this standard. Liu Yanbin, really Jia, Liu Xiaohong, Zhao Zhiwei, Lihua Ning, Ma Kun, Wang Hailong, Wang Keqin, Liu Ronggui, Yu Yimin, YAT.IntroductionWith the continuous development of international trade and government agencies, buyers, consumers and other parties to determine the product or service meets standards Increasing demand, showing a clear understanding of this method of compliance is becoming increasingly important. When considering this requirement, we put forward the following questions. --- What objects are certified? --- Who for certification? --- Who needs certification? --- Why do you need to prove compliance? --- How to best meet the information will be passed to the buyer, user (consumer) or government agencies? Third-party certification system standards compliance representation1 ScopeThis standard specifies the method of indicating conformity with standards and reference documents standard. It is mainly for standards compliance, too Applicable to other technical specifications compliance. It applies to the certification body under the authority of compliance made representation.2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 20000.1-2002 Guide for standardization - Part 1. General vocabulary of standardization and related activities (ISO /IEC refers South 2.1996, MOD)3 Terms and DefinitionsGB/T 20000.1-2002 established in the following terms and definitions apply to this standard. 3.1 Accordance with the procedures of third-party certification system for compliance with specific standards or other technical specifications of the products or services used or issued after Legally registered certification mark. 3.2 Third-party certification system in accordance with the procedures, documentation to meet specific standards or other technical specifications of the products or services issued 1). The demand side of the information in line with the standard 4 4.1 The manufacturer may you need to understand its products meet the relevant standards. 4.2 buyers may need to know about the products they purchase meet the requirements. "Purchaser" The term does not necessarily mean the end-user of the finished product. For example, he can later be processed into steel fasteners. 4.3 Checking organizations, insurance companies may require compliance information in order to have the confidence to take risks for the products. 4.4 regulatory agencies, such as government, may require legislation covering the products meet the required standard of evidence.5 types of buyers4.2 buyers mentioned can be divided into the following categories. 5.1 Consumer (ie, the public areas of the individual) 1) in different countries, a certificate of compliance has a different meaning and application. Consumers are supposed to have little or no technical knowledge, standards and little contact with people. 5.2 professional buyers Professional buyers are supposed to be knowledgeable and be able to understand their areas of work within the standards of people. Category 6 standards compliance certification is based 6.1 Overview Certificate of conformity may require various types (type) standard. Problems using a method which indicates compliance to the ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 27023-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 27023-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 27023-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 27023-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
