GB/T 26879-2025 English PDFUS$279.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 26879-2025: Grain and oils storage - Technical specification of heat insulation in horizontal warehouse Status: Valid GB/T 26879: Historical versions
Basic dataStandard ID: GB/T 26879-2025 (GB/T26879-2025)Description (Translated English): Grain and oils storage - Technical specification of heat insulation in horizontal warehouse Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: B20 Classification of International Standard: 65.040.20 Word Count Estimation: 14,113 Date of Issue: 2025-01-24 Date of Implementation: 2025-08-01 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 26879-2025: Grain and oils storage - Technical specification of heat insulation in horizontal warehouse---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. ICS 65.040.20 CCSB20 National Standard of the People's Republic of China Replaces GB/T 26879-2011 Technical specification for thermal insulation of flat warehouses for grain and oil storage Released on 2025-01-24 2025-08-01 Implementation State Administration for Market Regulation The National Standardization Administration issued Table of ContentsPreface III 1 Scope 1 2 Normative references 1 3 Terms and Definitions 2 4 Warehouse insulation technical requirements 3 4.1 Thermal insulation materials 3 4.2 Roof insulation structure 4.3 Silo roof insulation structure 4 4.4 Ceiling insulation structure 4 4.5 Warehouse wall insulation structure 5 4.6 Insulation of thermal bridges such as door and window openings 5 4.7 Other requirements 6 5 Technical requirements for grain pile insulation 6 5.1 Gland material 6 5.2 Basic methods of grain covering 6 5.3 Other requirements 6 6 Verification Methods 6 6.1 Warehouse insulation 6 6.2 Grain Pile Insulation 8 References 9ForewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting. This document replaces GB/T 26879-2011 "Technical Specification for Thermal Insulation of Grain and Oil Storage Warehouses". Compared with GB/T 26879-2011, In addition to structural adjustments and editorial changes, the main technical changes are as follows. --- Deleted the terms and definitions of heat transfer for stored grain, enclosure structure, insulation material, polyurethane foam layer and grain pile sealing (see.2011 Versions 3.2, 3.3, 3.4, 3.9 and 3.10); --- Changed the definitions of warehouse insulation, static insulation, dynamic insulation, roof insulation, ceiling insulation, and grain cover (see 3.1, 3.2, 3.3, 3.4, 3.5 and 3.6, 3.1, 3.5, 3.6, 3.7, 3.8 and 3.11 of the.2011 edition); --- Added the terms and definitions of radiant cooling materials, aerogels, polyurethane insulation boards and thermal bridges (see 3.7, 3.8, 3.9 and 3.10); --- Changed the requirements for polyurethane foam materials, thermal insulation coatings, ceiling materials, and overhead materials (see 4.1.2~4.1.5,.2011 edition 4.1.2~4.1.5); --- Added radiation cooling materials, aerogel materials, polyurethane insulation boards, paving radiation cooling films or aerogel insulation coils for insulation, interior Requirements for thermal insulation of polyurethane insulation boards pasted on walls (see 4.1.6~4.1.8, 4.3.3, 4.5.3); --- Changed the requirements for thermal insulation of thermal bridges such as door and window openings (see 4.6, 4.6 of the.2011 edition); --- Deleted "rice husk cover" and "quilt or blanket cover" (see 5.2.1 and 5.2.3 of the.2011 edition); --- Changed "Chemical material gland" and "Other material gland" (see 5.2, 5.1.3, 5.2.2, 5.2.4 of the.2011 edition); --- Changed "Thermal insulation precautions" (see 4.7, 5.3, Chapter 6 of the.2011 edition); --- Added verification method (see Chapter 6). Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document was proposed by the State Administration of Grain and Material Reserves. This document is under the jurisdiction of the National Technical Committee on Cereals and Oils Standardization (SAC/TC270). This document was drafted by. China National Grain Reserves Group Co., Ltd., Henan University of Technology, China National Grain Reserves Chengdu Storage Research Institute Co., Ltd., Liaoning Institute of Food Science. The main drafters of this document are. Ye Zhenhong, Wang Dianxuan, Fu Pengcheng, Zhu Kai, Cao Yi, Li Haojie, Qin Ning, Liu Shengqiang, Zhao Jinhui, Zhao Xiaojun, Li Yanhai, Xu Qingyu, Wang Jianlong, Gou Bin, Ma Chunbao. The previous versions of this document and the documents it replaces are as follows. ---First published in.2011 as GB/T 26879-2011; ---This is the first revision. Technical specification for thermal insulation of flat warehouses for grain and oil storage1 ScopeThis document defines the terminology of thermal insulation technology for flat warehouses and grain piles, and specifies the requirements for thermal insulation technology for warehouses, grain piles and For other requirements, describe the corresponding verification methods. This document applies to the insulation technology treatment of newly built or renovated bunk warehouses to slow down the rise in grain temperature.2 Normative referencesThe contents of the following documents constitute the essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document. GB/T 1043.1 Determination of impact properties of simply supported plastic beams Part 1.Non-instrumented impact test GB/T 5480 Test methods for mineral wool and its products GB/T 6343 Determination of apparent density of cellular plastics and rubber GB 8624-2012 Classification of combustion performance of building materials and products GB/T 8810 Determination of water absorption of rigid cellular plastics GB/T 8811 Test method for dimensional stability of rigid cellular plastics GB/T 8813 Determination of compression properties of rigid cellular plastics GB/T 9641 Test method for tensile properties of rigid cellular plastics GB/T 9780 Test method for stain resistance of architectural coatings GB/T 10294 Determination of steady-state thermal resistance and related properties of thermal insulation materials - Guarded hot plate method GB/T 10295 Determination of steady-state thermal resistance and related properties of thermal insulation materials - Heat flow meter method GB/T 10799 Determination of open and closed cell volume percentage of rigid cellular plastics GB/T 13475 Determination and calibration of adiabatic steady-state heat transfer properties and guarded hot box method GB/T 13519 Polyethylene heat shrinkable film for packaging GB/T 17671 Test method for strength of cement mortar (ISO method) GB 18580 Limits of formaldehyde emission from artificial boards and their products for interior decoration and renovation GB 18582 Limits of Hazardous Substances in Building Wall Paints GB/T 29061-2012 Functional films for architectural glass GB/T 29890 Technical Specification for Grain and Oil Storage GB 50016 Code for Fire Protection Design of Buildings GB 50345-2012 Technical Specification for Roofing Engineering GB 50404 Technical specification for rigid polyurethane foam thermal insulation and waterproofing engineering HG/T 4341-2012 Heat reflective insulation coatings for metal surfaces JC/T 942 Butyl rubber waterproof sealing tape JG/T 235 Building reflective thermal insulation coating JGJ/T 110 Test standard for bonding strength of facing tiles in building engineering JGJ/T 261 Technical specification for exterior wall thermal insulation engineering ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 26879-2025_English be delivered?Answer: Upon your order, we will start to translate GB/T 26879-2025_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 26879-2025_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 26879-2025_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 26879-2025?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 26879-2025 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
