GB/T 26548.3-2017 English PDF

US$564.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 26548.3-2017: Hand-held portable power tools -- Test methods for evaluation of vibration emission -- Part 3: Polishers and rotary, orbital and random orbital sanders
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 26548.3-2017	564	Add to Cart	5 days	Hand-held portable power tools -- Test methods for evaluation of vibration emission -- Part 3: Polishers and rotary, orbital and random orbital sanders	Valid

Similar standards

GB/T 45677   GB/T 5357   JB/T 3943   GB/T 26548.5   GB/T 26548.11   GB/T 26548.12   

Basic data

Standard ID: GB/T 26548.3-2017 (GB/T26548.3-2017)
Description (Translated English): Hand-held portable power tools -- Test methods for evaluation of vibration emission -- Part 3: Polishers and rotary, orbital and random orbital sanders
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J48
Classification of International Standard: 13.160; 25.140.10
Word Count Estimation: 30,342
Date of Issue: 2017-05-12
Date of Implementation: 2017-12-01
Quoted Standard: GB/T 6247.2-2013; GB/T 25631-2010; ISO 630-1995; ISO 2787-1984; ISO 5391-2003; EN 12096-1997; ISO 5349-1-2001; ISO 5349-2-2001
Adopted Standard: ISO 28927-3-2009, IDT
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the test method of hand-held portable power drive for the surface treatment process rather than the removal of the material of the polishing machine, rotary, skateboard and double-grinding machine handle parts of the hand vibration measurement test method to determine the type of test state of operation of the machine When the handle grip parts of the type of vibration test procedures. The measured results are used to compare the vibration of different types of machines of the same type. This standard applies to hand-held machines driven by pneumatic or other power (see Chapter 5). This standard does not apply to straight grinding grinders or abrasive grinders with grinding wheels. Note: In order to avoid confusion with the "power tools" and "insert tools", this standard throughout the use of "machine" instead of "power tools."

GB/T 26548.3-2017: Hand-held portable power tools -- Test methods for evaluation of vibration emission -- Part 3: Polishers and rotary, orbital and random orbital sanders

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 3. Polishers and rotary, orbital and random orbital sanders ICS 13.160; 25.140.10 J48 National Standards of People's Republic of China Hand - held portable power tools - Vibration test method Part 3. Polishing machine, rotary, skateboard type And double grinding machine emission-Part 3. Polishersandrotary, orbitalandrandomorbitalsanders (ISO 28927-3..2009, IDT) 2017-05-12 released 2017-12-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China China National Standardization Management Committee released Directory Preface I Introduction II 1 Scope 1 2 normative reference document 1 3 terms, definitions and symbols 4 Basic criteria and vibration test methods 3 5 description of machine type 3 6 Description of vibration characteristics 5 7 Instrument Requirements 9 Test and operating conditions for machines

9 Measurement procedures and effectiveness of measurements

10 Test Report 14 Appendix A (Informative Appendix) Polishing Machine and Polishing Machine Vibration Test Report Form 15 Appendix B (Normative Appendix) Determination of Uncertainty 17 References 19

Foreword

GB/T 26548 "hand-held portable power tools vibration test method" is divided into the following parts. - Part 1. Angle and end face grinders; - Part 2. gas trigger, nut wrench and screwdriver; - Part 3. Polishing machines, rotary, skateboard and double grinding machines; - Part 4. Straight handle grinders; - Part 5. Drilling and impact drilling; - Part 6. Tamping machines; - Part 7. Blanking machines and scissors; - Part 8. reciprocating saws, polishing machines and rasping and tilting or rotary saws; - Part 9. derusting hammer and needle beam derusting; - Part 10. Impact rock drill, hammer and crusher; Part 11. stone hammer; - Part 12. Mold grinders. This part is part 3 of GB/T 26548. This part is drafted in accordance with the rules given in GB/T 1.1-2009. This part uses the translation method equivalent to ISO 28927-3..2009 "Handheld portable power tool vibration test method Part 3. Polishing machine, rotary type, skateboard type and double type grinding machine ". In this part of the normative reference to the international documents have a consistent correspondence between the following documents. GB/T 700-2006 Carbon structural steel (ISO 630..1995, NEQ) Test Method for Performance of Drilling Machinery and Pneumatic Tools (ISO 2787. 1984, MOD) GB/T 5621-2008 Rock drilling machinery and portable power tools - Part 1. Rock drilling machines, pneumatic tools and Pneumatic machinery (ISO 5391..2003, MOD) --- GB/T 14790 (all parts) Mechanical vibration Measurement and evaluation of human exposure to hand vibration [ISO 5349 Minute)] This section makes the following editorial changes. --- "international" in the "bar" converted to "MPa" (1bar = 0.1MPa); --- Chapter 5 "Figure 9" to "Figure 7", the international standard error. This part is made by the China Machinery Industry Federation. This part of the National Rock Drilling Machinery and Pneumatic Tools Standardization Technical Committee (SAC/TC173) centralized. This part of the drafting unit. Zhejiang Rongpeng Pneumatic Tools Co., Ltd., Tianshui rock drilling machinery pneumatic tools Institute, Zhejiang Ruifeng Wufu pneumatic Tools Limited. This part of the main drafters. Li Xiaorong, high school diameter, Pan Linggang, Yang Fazheng, Li Guijie, Chen Jinlin, Cai Chaoshan, Li Yonggang.

Introduction

This document is the Class C standard specified in GB/T 15706. For machines designed and manufactured in accordance with the requirements of category C, when the requirements of Class C standards differ from those in Class A or Class B standards , The requirements in category C standards are superior to other criteria. GB/T 25631 gives the hand-held and hand-guided mechanical vibration measurement of the general technical conditions, GB/T 26548 to the standard Based on the vibration test method of hand-held portable machine, which stipulates the operation of the machine under the type test condition and the type test Can other requirements. Its standard structure and chapter number and GB/T 25631 consistent. GB/T 26548 of this part of the European standard EN60745 used in the first use of the sensor basic positioning method, due to extension The reason for the continuation is inconsistent with GB/T 25631. The sensor is preferred to be placed near the area between the thumb and forefinger of the hand The interference to this position is minimal for the operator to hold the machine. It has been found that the vibrations of the polisher and all types of polishes are very varied when used. This is due to polished mat or polished The imbalance of the pad and the difference between the insert tool and the workpiece surface contact. As the weight of the polished pad is the weight of the weight in the machine Balance, so skateboard and double-grinding machine on the polishing pad weight changes more sensitive. The vibration value of the machine depends to a large extent on Operator skills. This part uses a real working procedure for testing. In order to provide a test that gives better reproducibility measurements Test method, select the test program generated by the vibration value as much as possible in line with the requirements of GB/T 25631, and strictly abide by GB/T 25631 Requirements for the description of the test details. Workplace vibration exposure should be ISO 5349. The value obtained is the type test value used to indicate the average of the upper quartile of the typical vibration of the machine in actual use. however, The actual value sometimes changes greatly, depending on many factors, including the operator, the task, and the insertion of tools or consumables. The machine itself The maintenance status may also be important. In the real working condition, the influence of the operator and the operating program on the low amplitude vibration is especially serious. because This, less than 2.5m/s2 of the vibration radiation value, in the real working conditions are not recommended assessment. In this case, it is recommended to use 2.5m/s2 vibration Momentum values are used to directly evaluate the vibration of the machine. If a specific workplace requires a precise value, it is necessary to perform measurements in accordance with ISO 5349 in this working condition. In reality The vibration value measured under the working conditions may be higher or lower than the value obtained in this part of GB/T 26548. Under actual conditions, due to the use of excessive imbalance of the insertion tool, the weight does not match the polishing pad, wear pad or bending The shaft and other reasons, are prone to a higher vibration value. Hand - held portable power tools - Vibration test method Part 3. Polishing machine, rotary, skateboard type And double grinding machine

1 Scope

This part of GB/T 26548 specifies a hand-held portable power drive for the surface treatment process rather than the removal of the material, The test method of the measurement of the vibration of the hand, which is determined by the method of measuring the vibration of the handle of the rotary, skateboard and double-grinding machine. When the machine is operated in the type test state Handle type of vibration of the handle of the type of inspection procedures. The measured results are used to compare the vibration of different types of machines of the same type. This section applies to hand-held machines driven by pneumatic or other power (see Chapter 5). This part does not apply to straight grinding grinders or abrasive grinding machines for grinding wheels. Note. In order to avoid confusion with the "power tool" and "insert tool", this part of the "machine" instead of "power tool".

2 normative reference documents

The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article Pieces. For undated references, the latest edition (including all modifications) applies to this document. GB/T 6247.2-2013 Glossary of drilling and portable power tools - Part 2. Hydraulic tools (ISO 17066. 2007, IDT) GB/T 25631-2010 Rules for the evaluation of mechanical vibration and hand-held mechanical vibration (ISO 20643..2005, IDT) ISO 630..1995 Structural steel sheet, steel, steel (Structuralsteels-Plates, wideflats, bars, sectionsand profiles) ISO 2787. 1984 Rotary and percussion pneumatic performance test (Rotaryandpercussivepneumatictools- Performancetests ISO 5349..2001 (all parts) Mechanical vibration Measurement and evaluation of human exposure to manual vibration (Mechanical vibration-Measurementandevaluationofhumanexposuretohand-transmittedvibration ISO 5391..2003 Pneumatictools and mach words (Pneumatictoolsandmachines-Vocabulary) EN12096..1997 Marking and verification of mechanical vibration vibration values (Mechanical vibration-Declarationand verificationofvibrationemissionvalues 3 terms, definitions and symbols GB/T 6247.2-2013, GB/T 25631-2010 and ISO 5391..2003, as well as the following terms, definitions and symbols For use in this document. 3.1 Terms and definitions 3.1.1 Polisher Fitted with a flexible pad and a sheepskin or felt for the surface finish. Note. rewrite ISO 5391..2003, definition 2.1.4.6. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 26548.3-2017_English be delivered?

Answer: Upon your order, we will start to translate GB/T 26548.3-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 26548.3-2017_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 26548.3-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.