GB/T 26276-2010 English PDFUS$279.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 26276-2010: Test method of non-destructive inspection for earth-mover radial tyres -- X-ray method Status: Valid
Basic dataStandard ID: GB/T 26276-2010 (GB/T26276-2010)Description (Translated English): Test method of non-destructive inspection for earth-mover radial tyres -- X-ray method Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: G41 Classification of International Standard: 83.160.99 Word Count Estimation: 12,182 Date of Issue: 2011-01-14 Date of Implementation: 2011-11-01 Quoted Standard: GB/T 6326 Regulation (derived from): National Standard Approval Announcement 2011 No.43 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the OTR radial tire X -ray nondestructive testing of terms and definitions, principle, inspection equipment, , sample inspection procedures, determination of test results and inspection records. This standard applies to OTR radial tire X -ray non-destructive testing. GB/T 26276-2010: Test method of non-destructive inspection for earth-mover radial tyres -- X-ray method---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Test method of non-destructive inspection for earth-mover radial tyres. X-ray method ICS 83.160.99 G41 National Standards of People's Republic of China OTR radial tire non-destructive testing methods X-ray method X-raymethod Issued on. 2011-01-14 2011-11-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis standard was drafted in accordance with GB/T 1.1-2009 given rules. The standard proposed by China Petroleum and Chemical Industry Association. The standard tire rim by the National Standardization Technical Committee (SAC/TC19) centralized. This standard drafting units. China Guilin Rubber Chemical Co., Triangle Tyre Co., Ltd., Shandong Linglong Tyre Co. Division race wheel Co., Ltd., Aeolus Tyre Co., Double Coin Holdings Ltd., Hangzhou Zhongce Rubber Co., Ltd., Beijing Rubber Industry Research and Design Institute. The main drafters of this standard. Meng Yi Zhao Liang gold trick, Miss Polly Chan, Li Zhengang, An Dengfeng, including Jingping, Chen Guohua, He Xiaomei, Xu Lihong, TENG Li Ran. OTR radial tire non-destructive testing methods X-ray method1 ScopeThis standard specifies the OTR radial tire X-ray non-destructive testing of terms and definitions, principle, sample, test equipment, test drive Sequence determination and inspection records, test results. This standard applies to OTR radial tire X-ray non-destructive testing.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 6326 tires terms and definitions3 Terms and DefinitionsTerms and definitions GB/T 6326 defined apply to this document. Principle 4 In this method, showing different levels of attenuation at different X-ray penetrating substances, in real-time imaging device showed light and shade Difference degree, by observing the arrangement in the case of a video image of the radial tire steel cord, rubber shading, infer radial tire defect The nature and location of the defect.5 SampleAfter the sample should be cured at ambient temperature to park more than 8h, the surface quality inspection and clean the surface of the tire. 6. Inspection Equipment 6.1 X-ray generator X-ray emission angle should ensure that the tires are not detecting the presence of the dead in the case of continuous testing. X-ray emission should have sufficient strength to ensure that present a clear image of the tire components of different thickness irradiated. 6.2 Image Processing System It includes an image receptor, X-ray imaging and capture software, image software, should have an electronic offset and gain calibration functions Can ensure stable sharp image, the internal structure of the tire rolling image displayed on the display. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 26276-2010_English be delivered?Answer: Upon your order, we will start to translate GB/T 26276-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 26276-2010_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 26276-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
