GB/T 26114-2024 English PDFUS$279.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 26114-2024: Filter for liquid filtration - General technical specification Status: Valid GB/T 26114: Historical versions
Basic dataStandard ID: GB/T 26114-2024 (GB/T26114-2024)Description (Translated English): Filter for liquid filtration - General technical specification Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: J77 Classification of International Standard: 73.120 Word Count Estimation: 14,139 Date of Issue: 2024-04-25 Date of Implementation: 2024-11-01 Older Standard (superseded by this standard): GB/T 26114-2010 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 26114-2024: Filter for liquid filtration - General technical specification---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.ICS 73:120 CCSJ77 National Standards of People's Republic of China Replace GB/T 26114-2010 General technical specifications for filters for liquid filtration Released on 2024-04-25 2024-11-01 Implementation State Administration for Market Regulation The National Standardization Administration issued Table of ContentsPreface III 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Type 2 5 Technical Requirements 4 5:1 Basic Requirements 4 5:2 Performance requirements 4 5:3 Requirements for materials and purchased parts 4 5:4 Structural requirements 4 5:5 Manufacturing requirements 4 5:6 Safety requirements 5 6 Test methods 5 6:1 Performance requirements 5 6:2 Internal sealing between filter element and support 5 6:3 Geometric dimensions 5 6:4 Nondestructive testing 5 6:5 Pressure test 5 6:6 Appearance quality 5 6:7 Safety requirements 6 7 Inspection Rules 6 7:1 Inspection categories 6 7:2 Factory Inspection 6 7:3 Type inspection 6 7:4 Inspection Items 6 8 Marking, random technical documents, packaging, transportation and storage 7 8:1 Signs 7 8:2 Random technical documents 7 8:3 Packaging and transportation 7 8:4 Storage 7 Appendix A (Informative) Filter Selection Parameters Table 8 Table 1 Filter Inspection Items Table 6 Table A:1 Filter selection parameters 8ForewordThis document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for standardization work Part 1: Structure and drafting rules for standardization documents" Drafting: This document replaces GB/T 26114-2010 "General Technical Specification for Filters for Liquid Filtration" and is consistent with GB/T 26114-2010: In addition to structural adjustments and editorial changes, the main technical changes are as follows: a) The scope of application has been changed (see Chapter 1, Chapter 1 of the:2010 edition), and “non-hydraulic systems” has been deleted (see Chapter 1 of the:2010 edition): Chapter 1); b) The definitions of core filter, basket filter and disc filter have been changed (see 3:2 to 3:4, 3:4 to 3:6 of the:2010 edition), and In addition to the terms and definitions for “filter bag” and “filter basket” (see Chapter 3 of the:2010 edition); c) The filter model indication method has been deleted (see 4:3 of the:2010 edition); d) Added basic requirements to be followed in design and requirements for geometric dimensions (see 5:1); e) The requirements for metal materials in the requirements for materials and purchased parts have been changed (see 5:3:1, 5:3:1 of the:2010 edition), and castings and forgings have been deleted: The requirements for material selection (see 5:3:2, 5:3:3, 5:3:4 of the:2010 edition) have been added with regard to the material contact part: Request (see 5:3:3); f) Increased internal sealing between the filter element and the support, the top cover and the top cover fixing, the space between the filter element, the filter The support type and position design and the requirements for filter structure in special industries (see 5:4:1, 5:4:4~5:4:7) are deleted: Strength and rigidity requirements for cylinder top cover and fixings (see 5:4:3 of the:2010 edition); g) Added the requirements for filter sealing (see 5:5:2); h) The requirements for appearance quality have been changed (see 5:5:3:1, 5:5:3:1 of the:2010 edition); i) Added safety requirements for design failure, misoperation, shutdown or standby (see 5:6:1 and 5:6:2); j) Added anti-static requirements for filter elements and safety requirements for electrical control systems (see 5:6:5 and 5:6:6); k) Changed the test methods for filtration accuracy and pressure drop-flux characteristics to GB/T 30176 (see 6:1:2, 6:1:2,:2010 edition) 6:1:1, 6:1:2); l) Added test methods for the internal sealing, geometric dimensions, appearance quality and safety performance of filter elements and support parts (see 6:2, 6:3, 6:6, 6:7); m) The test methods for non-destructive testing and pressure testing have been changed (see 6:4, 6:5, 6:2, 6:3 of the:2010 edition); n) Added internal sealing and safety requirements for filter elements and support parts (see Table 1, Table 6 of the:2010 edition); o) The requirements for filter packaging and transportation have been changed (see 8:3, 8:3 of the:2010 edition): Please note that some of the contents of this document may involve patents: The issuing organization of this document does not assume the responsibility for identifying patents: This document was proposed by the China Machinery Industry Federation: This document is under the jurisdiction of the National Technical Committee for Standardization of Separation Machinery (SAC/TC92): This document was drafted by: Feichao (Wuxi) Filtration Technology Co:, Ltd:, Hefei General Machinery Research Institute Co:, Ltd:, Shanghai Chemical Industry Research Institute Co:, Ltd:, Shanghai Dazhang Filtration Equipment Co:, Ltd:, Henan Deyuan Purification Equipment Co:, Ltd:, Hangzhou Dali Filtration Equipment Co:, Ltd:, Jingjin Equipment Co:, Ltd:, Feichao (Shanghai) New Materials Co:, Ltd:, Jiangsu Meiya Keze Filtration Technology Co:, Ltd:, Wuxi Shengte Stone Chemical Accessories Co:, Ltd:, Ganuo (Hangzhou) Purification System Equipment Co:, Ltd:, and Yuzhou Yuwei Filtration Equipment Co:, Ltd: The main drafters of this document are: Fan Liqin, Zhou Jin, Wu Fang, Zhao Jushan, Li Songling, Hong Lihua, Jiang Guiting, Qin Wangfeng, He Sheng, Shi Zhenya, Zhou, X:, Zhang, Y:, and Zhang, Z:L: The previous versions of this document and the documents it replaces are as follows: ---First published in:2010 as GB/T 26114-2010; ---This is the first revision: General technical specifications for filters for liquid filtration1 ScopeThis document specifies the types, technical requirements, test methods, inspection rules, standards, and specifications of filters for liquid filtration (hereinafter referred to as "filters"): Marking, random technical documents, packaging, transportation and storage: This document applies to the design, manufacture and use of bag filters, core filters, basket filters and disc filters for liquid filtration: test:2 Normative referencesThe contents of the following documents constitute the essential clauses of this document through normative references in this document: For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document: GB/T 150:4 Pressure vessels Part 4: Manufacturing, inspection and acceptance GB/T 2346 Nominal pressure series for fluid transmission systems and components GB/T 4774 Terminology of Filtration and Separation GB/T 17446 Vocabulary of fluid transmission systems and components GB/T 25150 Test method for the quality of passive film on austenitic stainless steel in chemical cleaning of industrial equipment - Blue dot method GB/T 30176 Test methods for filter performance for liquid filtration GB/T 36522 General technical requirements for electrical control systems for separation machinery NB/T 10558 Pressure vessel coating and transport packaging NB/T 47003:1 Atmospheric pressure vessels Part 1: Steel welded atmospheric pressure vessels NB/T 47015 Pressure vessel welding code TSG21 Safety Technical Supervision Regulations for Stationary Pressure Vessels3 Terms and definitionsThe terms and definitions defined in GB/T 4774 and GB/T 17446 and the following apply to this document: 3:1 Bag filter bagfilter A pressure filter with filter bags as filter elements: Note: The filter bag is supported by a perforated plate or a frame-shaped basket inside the filter: The liquid enters the filter bag and flows out after being filtered: Impurities are intercepted inside the filter bag: Replace or clean: 3:2 Cartridge filter A filter with a filter element as the filter element: 3:3 Basket filter basketfilter A filter with a filter basket as the filter element: ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 26114-2024_English be delivered?Answer: Upon your order, we will start to translate GB/T 26114-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 26114-2024_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 26114-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 26114-2024?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 26114-2024 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
