GB/T 25727-2010 English PDFUS$189.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 25727-2010: Grain and oil machinery -- Screw press dehydrator Status: Valid
Basic dataStandard ID: GB/T 25727-2010 (GB/T25727-2010)Description (Translated English): Grain and oil machinery -- Screw press dehydrator Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: X91 Classification of International Standard: 67.260 Word Count Estimation: 8,818 Date of Issue: 2010-12-23 Date of Implementation: 2011-03-01 Quoted Standard: GB/T 191; GB 5226.1; GB/T 10362; GB/T 13306; GB/T 24854; GB/T 24855; GB/T 24856; GB/T 24857; GB/T 25218; GBZ 158 Regulation (derived from): National Standard Approval Announcement 2010 No.10 (Total No.165) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the terms and definitions screw extractors, works, model and the basic parameters, technical requirements, test methods, inspection rules, Labeling and packaging, storage and transport requirements. This standard applies to the processing of starch on fiber wet after washing and wet germ dewatering equipment. GB/T 25727-2010: Grain and oil machinery -- Screw press dehydrator---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Grain and oil machinery. Screw press dehydrator ICS 67.260 X91 National Standards of People's Republic of China Grain and oil machinery screw water Issued on. 2010-12-23 2011-03-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordAppendix A of this standard is a normative appendix. The standard proposed by the National Food Authority. This standard by the National Standardization Technical Committee OILS. Drafting of this standard. National Grain Reserve Wuhan Science Research Institute, COFCO Biochemical Energy Division, Yixing City, Georgia Rand concentrated Drying Equipment Co. The main drafters of this standard. Ai Yongping, Li Yan, Luo Hu, Ma Xiaogeng. Grain and oil machinery screw water1 ScopeThis standard specifies the terms and definitions spiral dryer, working principle, model and basic parameters, technical requirements, test methods, inspection regulations Then, Labeling and packaging, storage and transportation requirements. This standard applies to the processing of starch washed wet wet germ and fiber dewatering equipment.2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 191 Packaging - Pictorial signs GB 5226.1 mechanical and electrical safety of machinery - Electrical equipment - Part 1. General requirements GB/T 10362 Inspection of grain and corn moisture determination GB/T 13306 signs GB/T 24854 grain and oil machinery products packaging technology GB/T 24855 General technical requirements grain machinery assembly GB/T 24856 Oil Machinery casting general technical conditions GB/T 24857 Oil Machinery plates, steel plate member General technical conditions GB/T 25218 Grain and Oil Painting machinery products general technical conditions GB Z158 workplace occupational hazard warning labels3 Terms and DefinitionsThe following terms and definitions apply to this standard. 3.1 Screw water screwpressdehydrator Promoting the role of rotary and adjustable pitch of the helix of the washed wet wet germ and fiber extrusion dewatering equipment.4 worksPitch diameter and axial movement of the material along the helical axis becomes smaller, so that pressing bore workspace also will be smaller. Screw shaft is rotated so that was The material is pressed into the volume of the space gradually reduced, the material is continuously extruded moisture.5 models and basic parametersMethodology 5.1 models Executed in accordance with Appendix A. 5.2 The basic parameters of the project The basic parameters include model specifications, production capacity, motor power, speed, dimensions. Instructions should be in the technical documentation, etc. Clearly marked. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 25727-2010_English be delivered?Answer: Upon your order, we will start to translate GB/T 25727-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 25727-2010_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 25727-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
