GB/T 25628-2023 English PDF

US$349.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 25628-2023: Earth-moving machinery - Tooth
Status: Valid

GB/T 25628: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 25628-2023	349	Add to Cart	4 days	Earth-moving machinery - Tooth	Valid
GB/T 25628-2010	479	Add to Cart	3 days	Earth-moving machinery -- Tooth	Obsolete

Similar standards

GB/T 18148   GB 26545   GB/T 25627   GB/T 25622.1   GB/T 25619   

Basic data

Standard ID: GB/T 25628-2023 (GB/T25628-2023)
Description (Translated English): Earth-moving machinery - Tooth
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: P97
Classification of International Standard: 53.100
Word Count Estimation: 18,175
Date of Issue: 2023-09-07
Date of Implementation: 2023-09-07
Older Standard (superseded by this standard): GB/T 25628-2010
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 25628-2023: Earth-moving machinery - Tooth

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 53.100 CCSP97 National Standards of People's Republic of China Replace GB/T 25628-2010 Earthmoving machinery bucket teeth Published on 2023-09-07 Implemented on 2023-09-07 State Administration for Market Regulation Released by the National Standardization Administration Committee

Foreword

This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1.Structure and Drafting Rules of Standardization Documents" Drafting. This document replaces GB/T 25628-2010 "Earthmoving Machinery Bucket Teeth". Compared with GB/T 25628-2010, except for structural adjustment and compilation In addition to editorial changes, the main technical changes are as follows. a) Changed the scope of the standard (see Chapter 1, Chapter 1 of the.2010 edition); b) Added the term "assembly shake amount" (see 3.5); c) The normative reference documents for non-assembly dimensional deviations of forgings have been changed (see 5.2, 5.1 of the.2010 edition); d) Added requirements and test methods for “assembly shake” (see 5.3 and 6.3); e) Added quality tolerance requirements for shell casting and forging (see 5.4); f) Added mechanical property requirements for forging (see 5.5). Please note that some content in this document may be subject to patents. The publisher of this document assumes no responsibility for identifying patents. This document is proposed by China Machinery Industry Federation. This document is under the jurisdiction of the National Earthmoving Machinery Standardization Technical Committee (SAC/TC334). This document was drafted by. Ningbo Heshun New Materials Co., Ltd., Shantui Engineering Machinery Co., Ltd., Shantui Construction Machinery Co., Ltd., Ningbo Yasheng Casting Co., Ltd., Lovol Heavy Industry Group Co., Ltd., Tianjin Engineering Machinery Research Institute Co., Ltd. The main drafters of this document. Ren Meikang, Wang Zhangling, Yu Hailiang, Xu Gang, Li Mingguo, and Deng Yanfang. This document was first published in.2010 and this is the first revision. Earthmoving machinery bucket teeth

1 Scope

This document specifies the classification, requirements, test methods, inspection rules, marking and packaging of bucket teeth. This document applies to bucket teeth of various forms and specifications for earthmoving machinery such as excavators, loaders, scrapers, backhoe loaders, and bulldozers.

2 Normative reference documents

The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, the dated quotations For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to this document. GB/T 228.1 Tensile testing of metallic materials Part 1.Room temperature test method GB/T 229 Charpy pendulum impact test method for metal materials GB/T 230.1 Rockwell hardness test of metallic materials Part 1.Test methods GB/T 231.1 Brinell hardness test of metallic materials Part 1.Test method GB/T 531.1 Test method for indentation hardness of vulcanized rubber or thermoplastic rubber Part 1.Shore durometer method (Shore hardness) GB/T 6414 Casting dimensional tolerances, geometric tolerances and machining allowances GB/T 12362 Tolerances and machining allowances for steel die forgings GB/T 21154 Quality measurement methods for complete earthmoving machinery and its working devices and components

3 Terms and definitions

The following terms and definitions apply to this document. 3.1 Monoblock tooth monoblocktooth The tooth tip and gear seat are bucket teeth with an integrated structure and are generally connected by bolts. 3.2 combinedtooth The tooth tip and the tooth seat are connected through each other's matching structure and tooth pin to form a bucket tooth. 3.2.1 tip The front end of the bucket tooth is directly used for digging or shoveling. 3.2.2 Gear adapter The tail part of the bucket tooth is the part that fixes the bucket tooth by welding or other means. 3.2.3 Tooth pin The connecting piece or locking piece between the tooth tip and the gear seat is composed of a steel pin plus a circlip or a steel pin plus a rubber locking block. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 25628-2023_English be delivered?

Answer: Upon your order, we will start to translate GB/T 25628-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 25628-2023_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 25628-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 25628-2023?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 25628-2023 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.