GB/T 25428-2015 English PDFUS$1009.00 ยท In stock
Delivery: <= 7 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 25428-2015: Petroleum and natural gas industries -- Drilling and production equipment -- Drilling and well-servicing structures Status: Valid GB/T 25428: Historical versions
Basic dataStandard ID: GB/T 25428-2015 (GB/T25428-2015)Description (Translated English): Petroleum and natural gas industries -- Drilling and production equipment -- Drilling and well-servicing structures Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: E92 Classification of International Standard: 29.280 Word Count Estimation: 48,491 Date of Issue: 2015-12-31 Date of Implementation: 2016-04-01 Older Standard (superseded by this standard): GB/T 25428-2010 Quoted Standard: GB/T 9445; GB/T 19190; SY/T 5170; SY/T 6408; SY/T 6666; SY/T 10030; ISO 19901-1; API BULLENTIN 2INT-MET; AISC 335-89; ASCE/SEI 7-05; ASTM A370; ASTM A578/A578M; AWS D1.1/D1.1M Regulation (derived from): State Standard Announcement 2015 No.43 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the requirements and recommended practices for steel structures for drilling and workover operations in the petroleum industry, providing a uniform steel structure verification method and two product specification levels (PSLs). This standard applies to all new steel tower masts, lightweight masts (including light-weight derrick derrick and workover mast), base and overhead crane assembly manufactured after the effective date. Note: Annex A specifies some standard additional requirements (SR), which are applicable only when specified by the purchaser. Appendix B is an informative annex to the Notes that helps to understand this standard. Appendix C is an informative annex to the Procurement Guidelines to assist purchasers in the procurement of equipment manufactured under the requirements of this standard. GB/T 25428-2015: Petroleum and natural gas industries -- Drilling and production equipment -- Drilling and well-servicing structures---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Petroleum and natural gas industries - Drilling and production equipment - Drilling and well-servicing structures ICS 75.180.10 E92 National Standards of People's Republic of China Replace GB/T 25428-2010 Oil and gas industry drilling and oil extraction equipment Drilling and workover derrick, base 2015-12-31 released 2016-04-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China China National Standardization Management Committee released Directory Preface III 1 Scope 1 2 normative reference document 1 3 Terms and definitions 2 4 Product specification level 4 5 logo and information 4 5.1 Nameplate 4 5.2 Information on tower derrick and light derrick nameplate 5 5.3 Workover magazine nameplate information 5 5.4 Base nameplate information 6 5.5 Cart assembly nameplate information (only required when the crane assembly is used with the tower derrick) 6 6 Structure Security Level (SSL) 7 Design load 7 Design Specification 8.1 Permissible stress 9 8.2 Operating load 10 8.3 wind load 10 8.4 Power load 18 8.5 Seismic load 19 8.6 Ice load 19 8.7 Installation load 19 8.8 Transport loads 19 Overturn and Slip 19 8.10 Design Verification 20 Material 21 9.1 General 21 9.2 Written Norms 21 9.3 Mechanical properties 21 9.4 Material Quality Identification 21 9.5 Material Manufacturing 21 9.6 Bolt 21 9.7 wire rope 21 10 Welding requirements 21 10.1 General 21 10.2 Welding Evaluation 22 10.3 Written documents 22 10.4 Control of welding material 22 10.5 Weld performance 22 10.6 Post-weld heat treatment 22 Quality control requirements 10.8 specific requirements --- welding 22 Quality Control 11.1 General 23 11.2 Quality control personnel qualification 23 11.3 Test equipment 23 Non - destructive testing 11.5 Size Verification 24 11.6 Processing and finishing 24 Inspection and Rejection of Procurement Party 11.8 Test 25 11.9 Retrospective 25 11.10 Process that requires confirmation 12 documents 26 12.1 General 26 12.2 Documents saved by the manufacturer 12.3 Random documents when the equipment is delivered 27 Appendix A (normative appendices) Additional requirements 28 Appendix B (informative) Notes 30 Appendix C (informative) Purchasing Guide 39 Reference 43 ForewordThis standard is drafted in accordance with the rules given in GB/T 1.1-2009. This standard replaces GB/T 25428-2010 "Oil and gas industry drilling and oil extraction equipment drilling and workover derrick, base", and GB/T 25428-2010 compared to the main technical changes. - the term "rail and guide trolley", "maximum rated wind speed", "second floor", "sucker rod platform" (see.2010 edition 3.10, 3.19, 3.24, 3.27); - the term "maximum rated wind speed", "workover rig derrick", "wind environment" (see 3.20, 3.28, 3.31) - increased workover nameplate information (see 5.3); - the contents of the "standard rating" are deleted (see Chapter 6 of the.2010 edition); - modified the contents of Chapter 7 and increased the workover load of the workover rig (see Table 3 in Chapter 7); - the requirement to design "the cylinder for lifting the hopper base" (see 8.1.5); --- Added "ice load" content (see 8.6); - the "process of requesting confirmation" has been added to quality control (see 11.10); - some additions to the instructions in the delivery of the equipment (see 12.3.1); --- Removal of the.2010 edition of the "Standard derrick" (see Appendix B of the.2010 edition); - Added information on Appendix B, "Notes" and informative Appendix C, "Procurement Guidelines" (see Appendix B and Appendix C). This standard is proposed by the National Petroleum Drilling Equipment and Tools Standardization Technical Committee (SAC/TC96). The drafting of this standard unit. Baoji Petroleum Machinery Co., Ltd., Sinopec Petroleum Engineering Machinery Co., Ltd. Fourth Machinery Plant, Nanyang two Oil equipment (Group) Co., Ltd., Sichuan Honghua Petroleum Equipment Co., Ltd., Lanzhou Lan Shi Petroleum Equipment Engineering Co., Ltd., oil industry Well Control Equipment Quality Supervision and Inspection Center, Shengli Oilfield Plateau Petroleum Equipment Co., Ltd., Chuanqing Drilling Engineering Co., Ltd. Sichuan West Drilling the company. The main drafters of this standard. Liu Hongfang, Huang Yuehua, Zhang Zhiwei, Yang Yugang, Jin Zongxiang, Yu Lijun, Wu Ke, Qiao Changkui, Wan Fu, Zhu Heng, Luo Hui. This standard replaced the previous version of the standard release. --- GB/T 25428-2010. Oil and gas industry drilling and oil extraction equipment Drilling and workover derrick, base1 ScopeThis standard specifies the requirements and recommended practices for the steel structure for drilling and workover operations in the petroleum industry and provides a uniform steel structure And two product specification levels (PSL). This standard applies to all new steel tower derricks manufactured after the effective date, light derrick (including wind rope derrick and workover light The derrick), the base and the crane assembly. Note. Appendix A specifies some standard additional requirements (SR) that apply only when the purchaser is specified. Appendix B is an informative appendix to the annotations used Help understand this standard. Appendix C is an informative appendix to the procurement guidelines to assist the purchaser in purchasing equipment manufactured in accordance with this standard.2 normative reference documentsThe following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article Pieces. For undated references, the latest edition (including all modifications) applies to this document. GB/T 9445 Non - destructive testing personnel qualification and certification Oil and gas industry drilling and oil recovery equipment GB/T SY/T 5170 Steel wire for industrial use in oil and gas industry SY/T 6408 Drilling and workover derrick, base maintenance and use SY/T 6666 Recommended practice for the use and maintenance of steel wire for industrial use in oil and gas industry SY/T 10030 Recommended practice for planning, designing and constructing offshore fixed platforms Working stress design method ISO .19901-1 Petroleum and natural gas industry - Particular requirements for offshore structures - Part 1. Design and operation of marine meteorological (Petroleumandnaturalgasindustries-Specificrequirementsforoffshorestructures-Part 1, Meto- ceandesignandoperatingconsiderations APIBuletin2INT-MET Interim Guidelines for Hurricane Conditions in the Gulf of Mexico (Interim Guidanceon Hurricane ConditionsintheGulfofMexico) AISC1) 335-89 Structural steel building specification Permissible stress design and plastic design (SpecificationforStructuralSteel Buildings-AlowableStressDesignandPlasticDesign) ASCE/SEI2) 7-05 Minimum design load for buildings and other structures (MinimumDesignLoads forBuildingsand OtherStructures) ASTM3) A370 steel products, mechanical properties of the standard test methods and definitions (StandardTestMethodsandDefinitionsfor MechanicalTestingofSteelProducts) 3) American Society for Materials and Testing, 100BarrHarborDrive, POBoxC700, WestConshohocken, Pennsylvania19428-2959, ASTMA578/A578M Special Purpose Rolled Steel Plate Straight Beam Ultrasonic Testing Standard Specification (StandardSpecificationfor ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 25428-2015_English be delivered?Answer: Upon your order, we will start to translate GB/T 25428-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 7 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 25428-2015_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 25428-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 25428-2015?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 25428-2015 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
