GB/T 25184-2010 English PDFUS$599.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 25184-2010: Verification method for X-ray photoelectron spectrometers Status: Valid
Basic dataStandard ID: GB/T 25184-2010 (GB/T25184-2010)Description (Translated English): Verification method for X-ray photoelectron spectrometers Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: G04 Classification of International Standard: 71.040.40 Word Count Estimation: 26,211 Date of Issue: 2010-09-26 Date of Implementation: 2011-08-01 Quoted Standard: GB/T 19500-2004; GB/T 21006-2007; GB/T 22461-2008; GB/T 20175-2006; GB/T 22571-2008; GB/T 25185-2010; ISO 15470-1999; ISO 18116; ISO 18118-2004; ISO 18516-2006; ISO 19319; ISO 24237 Regulation (derived from): National Standard Approval Announcement 2010 No.6 (Total No.161) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies test methods of X-ray photoelectron spectrometer. This standard applies to the use of non- monochromatic Al or Mg X -rays or monochromatic Al X -rays, and with a sputter ion gun cleaning X-ray photoelectron spectroscopy of the test. GB/T 25184-2010: Verification method for X-ray photoelectron spectrometers---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Verification method for X-ray photoelectron spectrometers ICS 71.040.40 G04 National Standards of People's Republic of China X-ray photoelectron spectrometer test method Issued on. 2010-09-26 2011-08-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released Table of ContentsPreface Ⅰ 1 Scope 1 2 Normative references 1 3 Symbols and Abbreviations 1 4 principle of the method and system configuration 3 Technical indicators and measurement units 5 4 6 test environment 5 7 test items and methods 5 8 report test results 22 9 22 test cycleForewordThis standard was drafted in accordance with GB/T 1.1-2009 given rules. The standard micro-beam analysis by the National Standardization Technical Committee Sub-Committee under the jurisdiction of surface analysis. The standard unit is responsible for drafting. Fujian Optical Co., Ltd., State Key Laboratory of Physical Chemistry of Solid Surfaces, Xiamen University. The main drafters of this standard. aqua regia chrysanthemum, when Swallow, Ding Xunmin. X-ray photoelectron spectrometer test method1 ScopeThis standard specifies the test methods of X-ray photoelectron spectrometer. This standard applies to the use of non-monochromatic radiation or Al or MgX AlX monochromatic radiation, and with a sputter ion gun cleaning X-ray photoelectron spectrometer calibration.2 Normative referencesThe following documents for the application of this document is essential, dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 19500-2004 X-ray photoelectron spectroscopy analysis General GB/T 21006-2007 Surface chemical analysis - X-ray photoelectron spectroscopy and Auger electron spectroscopy Linearity of intensity scale (ISO 21270.2004, IDT) GB/T 22461-2008 Surface chemical analysis - Vocabulary (ISO 18115.2001, IDT) GB/T 20175-2006 Surface chemical analysis - Sputter depth profiling using layered systems as reference materials optimization method (ISO 14606.2000, IDT) GB/T 22571-2008 Surface chemical analysis - X-ray photoelectron spectrometer energy scale calibration (ISO 15472.2001, IDT) GB/T 25185-2010 Surface chemical analysis of X-ray photoelectron spectroscopy charge control and charge correction method (ISO 19318.2004, IDT) ISO 15470.1999 Surface chemical analysis - X-ray photoelectron spectrometer instrument performance parameters of the selected representation (Surface Chemical Analysis-X-ray photoelectron spectrometers-Description of selected instrumental performanceparameters) ISO 18116 Surface chemical analysis sample preparation and installation procedures Standard Guide (Surfacechemicalanalysis- Guidelinesforpreparationandmountingofspecimensforanalysis) ISO 18118.2004 Surface chemical analysis AES and XPS quantitative analysis of homogeneous materials by experimentally determined relative sensitivity factor User guide (Surfacechemicalanalysis-Augerelectronspectroscopyand X-rayphotoelectron spectroscopy-Guidetotheuseofexperimentalydeterminedrelativesensitivityfactorsforthequantitative analysisofhomogeneousmaterials) ISO 18516.2006 Surface chemical analysis - Determination of lateral resolution of AES and XPS (Surfacechemicalanalysis- AugerelectronspectroscopyandX-rayphotoelectronspectroscopy-Determinationoflateralresolution) ISO 19319 Surface chemical analysis - Determination of AES and XPS lateral resolution, analysis area and analyzer analysis area (Surfacechemicalanalysis-AugerelectronspectroscopyandX-rayphotoelectronspectroscopy- Determinationoflateralresolution, analysisarea, andsampleareaviewedbytheanalyzer) ISO 24237 Surface chemical analysis XPS intensity scale repeatability and consistency (Surfacechemicalanalysis-X-ray photoelectronspectroscopy-Repeatabilityandconstancyofintensityscale)3 Symbols and AbbreviationsThe following symbols and abbreviations apply to this document. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 25184-2010_English be delivered?Answer: Upon your order, we will start to translate GB/T 25184-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 25184-2010_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 25184-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |