GB/T 25073-2010 English PDFUS$254.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 25073-2010: Micrographics -- Color microfilm -- Application of the exposure technique to prepare line originals and continuous tone originals Status: Valid
Basic dataStandard ID: GB/T 25073-2010 (GB/T25073-2010)Description (Translated English): Micrographics -- Color microfilm -- Application of the exposure technique to prepare line originals and continuous tone originals Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: A14 Classification of International Standard: 37.080 Word Count Estimation: 13,116 Date of Issue: 2010-09-02 Date of Implementation: 2010-12-01 Quoted Standard: GB/T 6151-1997; GB/T 6161-2008; GB/T 7973-2003; GB/T 11501-2008; GB/T 17293-2008; GB/T 18405-2008; ISO 128; ISO 216-2007; ISO 3664-2009; CIE 15-2004 Adopted Standard: ISO 11142-2005, IDT Regulation (derived from): Announcement of Newly Approved National Standards No. 4 of 2010 (total 159) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the color microfiche whom exposure technique and preparation of the original lines, continuous tone originals and test chart, including the necessary testing originals (see Chapter 5) and tested for color microfilm exposure assessment. This standard applies to color lithography and the available lines of the original and the evaluation of continuous-tone originals to prepare for microfilming purposes (see Appendix A). This standard is intended to make copies of the reproduction of the original color. As for the flush control, should comply with the film manufacturer 's recommendations. This standard does not consider the microfilm reader is projected color projection characteristics on microfiche form of subjective impressions. GB/T 25073-2010: Micrographics -- Color microfilm -- Application of the exposure technique to prepare line originals and continuous tone originals---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Micrographics. Color microfilm. Application of the exposure technique to prepare line originals and continuoustone originals ICS 37.080 A14 National Standards of People's Republic of China Micrographics - Colour microfilm Exposure technique and with suitable Preparation of the original lines and continuous tone original (ISO 11142.2005, IDT) Issued on. 2010-09-02 2010-12-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis standard is identical with ISO 11142.2005 "Micrographics color microfilm exposure technique and with suitable lines Preparation of originals and continuous-tone original "(in English) of technical content. For ease of use, this standard made the following editorial changes. --- Use the "standard" instead of "this International Standard"; --- Remove the directory with international standards; --- Remove the introduction of international standards; --- Deleted international standards foreword, preface written this standard; --- Corrected international standard two editorial errors (in the 5.1.4.2 "Figure 2" to "Figure 1," Table 1 "Standard Chroma "and" coordinate "into one column); --- 6.1.4 of the λ to domestic conventional optical density symbol D; --- Added Tables 2 and 3 in correspondence with ISO ISO character No. 2 force resolution test chart annotations; --- The Normative references to international standards with the national standards or international standards in force corresponding; --- Will apply international standards applicable to our presentation to the standard formulation. This Standard Document Imaging Technology by the National Standardization Technical Committee (SAC/TC86) and focal points. This standard was drafted. National Information Technology Standardization Technical Committee Document Imaging 4 of the Technical Committee. The main drafters. Zhang Yang, Li Jian, Li Ming. Micrographics - Colour microfilm Exposure technique and with suitable Preparation of the original lines and continuous tone original1 ScopeThis standard specifies the color line of microfilm exposure technique and preparation whom the original, continuous tone originals and test chart, including the necessary Original test (see Chapter 5) and the assessment of color microfilm test exposure. This standard applies to color lithography and evaluation of available original lines and continuous tone originals, to prepare for microfilming purposes (see Appendix A). This standard is intended to make copies of the reproduction of the original color. As for the flushing control, the film should comply with the manufacturer's recommendations. This standard does not consider microfiche readers feature on the projector is projecting a color microfilm form subjective impression. Note. When viewing color microfilm, microfiche reader should be neutral gray translucent screen (see Appendix A).2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 6151-1997 Textiles Tests for color fastness test General (eqv ISO 105-A01.1994) GB/T 6161-2008 Micrographics - ISO test chart No. 2 Resolving power is described and its application (ISO 3334.2006, IDT) GB/T 7973-2003 Paper, board and pulps measurement of diffuse reflectance factor (diffusion/vertical method) (ISO 2469.1994, NEQ) GB/T 11501-2008 photographic density measurements - Part 3. Spectral conditions (ISO 5-3.1995, IDT) GB/T 17293-2008 Micrographics inspection platform microfilm camera system performance using standard test plate (ISO 10550. 1994, MOD) GB/T 18405-2008 features Micrographics ISO character and ISO test chart No. 1 and its use (ISO 446. 2004, IDT) General principles ISO 128 Technical drawings graphical representation ISO 216.2007 after some printing paper and writing paper cutting size A and B series ISO 3664.2009 Graphic technology and photography viewing conditions CIE15.2004 colorimetry3 exposure technique3.1 Technical Brief exposure Exposure and replication technology has a great influence on the color quality of the final product. Therefore, it should meet the 3.2 to 3.6 are listed Care light color temperature, spectral characteristics of the exposure lens, filters and other basic requirements. 3.2 Lighting Because color microfilm is in accordance with the 3200K color temperature balance (see 3.4), the illuminance lighting should be kept constant color temperature In 3000K ~ 3400K range. 3.3 Exposure Lens All lenses used to capture color microfilm shall pass color correction. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 25073-2010_English be delivered?Answer: Upon your order, we will start to translate GB/T 25073-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 25073-2010_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 25073-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |