GB/T 24909-2010 English PDFUS$259.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 24909-2010: LED lamps for decorative lighting Status: Valid
Basic dataStandard ID: GB/T 24909-2010 (GB/T24909-2010)Description (Translated English): LED lamps for decorative lighting Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: K71 Classification of International Standard: 29.140.99 Word Count Estimation: 11,139 Date of Issue: 2010-06-30 Date of Implementation: 2011-02-01 Quoted Standard: GB/T 2828.1; GB/T 2829; GB 7000.1; GB 7000.7; GB 7000.9; GB 7000.201; GB 17625.1; GB 19651.3; GB/T 24824; GB/T 24826; GB/T 24908 Regulation (derived from): Announcement of Newly Approved National Standards 2010 No. 2 (total 157) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the rated supply voltage of 250 V at frequencies below 50 H: AC or DC decorative lighting with LED lamp (hereinafter referred to as light) product classification, technical requirements, inspection rules, marking, packaging, transportation and storage requirements. This standard applies to the composition of LED lights and related accessories. This product is suitable for indoor or outdoor decorative lighting. GB/T 24909-2010: LED lamps for decorative lighting---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.LED lamps for decorative lighting ICS 29.140.99 K71 National Standards of People's Republic of China Decorative lighting with LED lights Issued on. 2010-06-30 2011-02-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released Table of ContentsPreface Ⅰ 1 Scope 1 2 Normative references 1 3 Terms and definitions 4 Product Category 2 5 2 Technical Requirements 6 Test Method 4 7 Inspection rules 5 8 signs, packaging, transportation and storage 6 Appendix A (normative) light levels characteristic measurement method 7ForewordAppendix A of this standard is a normative appendix. The standard proposed by China National Light Industry Council. This standard by the National Standardization Technical Committee of electrical lighting (SAC/TC224) centralized. Drafting of this standard. Beijing Lighting Research Institute, Zhongshan-to Lighting Co., Ltd., Dongguan Kingsun Optoelectronic Co., Ltd., Tongxiang Shenghui Lighting Appliance Co., Ltd., Zhongshan Huayi Lighting Co., Ltd., Zhongshan Di Yisheng lighting plant, according to Shenzhen Lighting Manufacturing Co., Ltd., Zhongshan Guzhen Auman technology lighting Lighting Factory, Dalian nine long Optoelectronics Technology Co., Ltd., Guangdong Heshan Silver Rain Lighting Limited. The main drafters of this standard. Li Qijin, Wu Dehui, Huang Guan Zhi Shen Jin Xiang, according to Fu Peng, hydrofoil, Wei Yonggang, Li Xiaoping, Gao Yu Chau, Luo Yi, Jiang Zengqin, Jiu Xiang Tao. Decorative lighting with LED lights1 ScopeThis standard specifies the rated supply voltage of 250V or less frequency of 50Hz AC or DC decorative lighting LED lamp (hereinafter referred to as Lamp) product classification, technical requirements, inspection rules, marking, packaging, transportation and storage requirements. This standard applies to the LED lamps and related annexes. The product is suitable for indoor or outdoor decorative lighting.2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 2828.1 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch inspection sampling plan (GB/T 2828.1-2003, ISO 2859-1.1999, IDT) GB/T 2829 periodic inspection Sampling procedures and tables (suitable for process stability test) GB 7000.1 lamps - Part 1. General requirements and tests (GB 7000.1-2007, IEC 60598-1.2003, IDT) Floodlights GB 7000.7 Safety requirements (GB 7000.7-2005, IEC 60598-2-5.1998, IDT) GB 7000.9 lamps Part 2-20. Particular requirements - Lighting chains (GB 7000.9-2008, IEC 60598-2-20.2002, IDT) GB 7000.201 Luminaires - Part 2-1. Particular requirements for fixed general purpose luminaires (GB 7000.201-2008, IEC 60598- 2-1. 1987, IDT) GB 17625.1 Electromagnetic Compatibility Limits for harmonic current emissions (equipment input current ≤16A) (GB 17625.1- 2003, IEC 61000-3-2.2001, IDT) GB 19651.3 Miscellaneous lampholders - Part 2-2. LED module connected Particular requirements (GB 19651.3-2008, IEC 60838-2-2.2006, IDT) GB/T 24824 LED modules for general lighting test methods GB/T 24826 for general lighting LED and LED modules terminology and definitions GB/T 24908 for general lighting self-ballasted LED lamp performance requirements3 Terms and DefinitionsGB/T 24826 and identified by the following terms and definitions apply to this standard. 3.1 Composed by the LED and related accessories for decorative lighting lamps. 3.2 Lights under the specified operating conditions its particular value, the value and conditions specified by the manufacturer or the seller or by the standard. ...... |
