GB/T 24823-2024 English PDFUS$759.00 · In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 24823-2024: LED modules for general lighting - Performance specification Status: Valid GB/T 24823: Historical versions
Basic dataStandard ID: GB/T 24823-2024 (GB/T24823-2024)Description (Translated English): LED modules for general lighting - Performance specification Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: K71 Classification of International Standard: 29.140.99 Word Count Estimation: 38,325 Date of Issue: 2024-11-28 Date of Implementation: 2025-06-01 Older Standard (superseded by this standard): GB/T 24823-2017 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 24823-2024: LED modules for general lighting - Performance specification---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.ICS 29.140.99 CCSK71 National Standard of the People's Republic of China Replaces GB/T 24823-2017 Performance specification of LED modules for general lighting requirements,MOD) Released on 2024-11-28 2025-06-01 Implementation State Administration for Market Regulation The National Standardization Administration issued Table of ContentsPreface III 1 Scope 1 2 Normative references 2 3 Terms and Definitions 2 4 General requirements 5 5 Logo 5 6 Size 7 7 Test conditions 7 8 Electrical parameters of LED modules 8 9 Light output 9 10 Color coordinates, correlated color temperature (CCT) and color rendering10 11 LED module lifespan 11 12 Inspection Rules 14 13 Lighting design information 14 Appendix A (Informative) Explanation of the recommended LED product life measurement method 15 Appendix B (Normative) Explanation of optical parameter codes 21 Appendix C (Normative) Use of ANSI/IESLM-80-15 Luminous flux maintenance and color coordinate maintenance data 22 Appendix D (Normative) Test methods for LED module characteristics 24 Appendix E (Normative) Measurement of displacement coefficient 26 Appendix F (Informative) Explanation of the coefficient of variation 28 Appendix G (Informative) Luminaire Design Information 29 Appendix H (Informative) Test equipment for temperature measurement 30 Reference 31ForewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting. This document replaces GB/T 24823-2017 "Performance requirements for LED modules for general lighting" and is consistent with GB/T 24823-2017. In addition to structural adjustments and editorial changes, the main technical changes are as follows. --- Changed the voltage range of LED module type 1 (see Chapter 1, Chapter 1 of the.2017 edition); --- Deleted the description of individual percentages in the scope (see Chapter 1, Chapter 1 of the.2017 edition); --- Modified and added some terms and definitions (see Chapter 3, Chapter 3 of the.2017 edition); --- Added general requirements, and moved the description of protection and normal module startup and operation in Chapter 1 of the.2017 edition to the general requirements Find the middle (see Chapter 4, Chapter 1 of the.2017 edition); --- Changed the marking requirements (see Chapter 5, Chapter 4 of the.2017 edition); --- Changed the requirements for light efficiency (see 9.3, 8.3 of the.2017 edition); --- Changed the requirements for color rendering index (see 10.3, 9.3 of the.2017 edition); --- Changed the general requirements for the LED module characteristics test method (see D.1, A.1 of the.2017 edition); --- Changed the test method for electrical characteristics (see D.2, A.2 of the.2017 edition); --- The test method for photometric characteristics has been changed (see D.3, A.3 of the.2017 edition). This document is modified to adopt IEC 62717.2019 “Performance requirements for LED modules for general lighting purposes”. This document has made the following structural adjustments compared to IEC 62717.2019. --- Added Chapter 4 "General requirements" to include the protection and normal startup and operation of modules in the scope of Chapter 1 of IEC 62717.2019 The description is moved to Chapter 4; --- Appendix A corresponds to Appendix C in IEC 62717.2019; --- Appendix B corresponds to Appendix D in IEC 62717.2019; --- Appendix C corresponds to Appendix I in IEC 62717.2019; --- Appendix D corresponds to Appendix A in IEC 62717.2019; --- Appendix G corresponds to Appendix B in IEC 62717.2019; --- Deleted Appendix G in IEC 62717.2019. The technical differences between this document and IEC 62717.2019 and their reasons are as follows. --- The description of type test and the description of individual percentages have been deleted from the scope (see IEC 62717.2019 1) to adapt to the specific conditions of our country; --- Replaced IEC 60050-845 with the normative reference GB/T 2900.65 to facilitate the coordinated use of standards (see Chapter 3, Chapter 3 of IEC 62717.2019); --- Replaced IEC 62504 with the normative reference GB/T 24826 to facilitate the coordinated use of standards (see Chapter 3, Chapter 3 of IEC 62717.2019); --- Deleted the definition of test voltage, current or power (see Chapter 3 of IEC 62717.2019); --- Deleted the definition of luminous flux attenuation of LED products (see Chapter 3 of IEC 62717.2019); --- Replaced IEC 61347-2-13 with the normative reference GB/T 19510.213 to facilitate the coordinated use of standards (see Chapter 4, Chapter 1 of IEC 62717.2019); --- Replaced IEC 62384 with the normative reference GB/T 24825 to facilitate the coordinated use of standards (see Chapter 4, Chapter 1 of IEC 62717.2019); --- Replaced IEC 60598-1 with the normative reference GB/T 7000.1 to facilitate the coordinated use of standards (see Chapter 4, Chapter 1 of IEC 62717.2019); --- Replaced IEC 62031 with the normative reference GB/T 24819 to facilitate the coordinated use of standards (see 5.1 and 7.1, 4.1 and 6.1 of IEC 62717.2019); --- Replaced IEC 60068-2-14 with the normative reference GB/T 2423.22 to facilitate the coordinated use of standards (see 11.3, 10.3 of IEC 62717.2019); --- Replaced IEC 60068-3-5.2001 with the normative reference GB/T 2424.5 to facilitate the coordinated use of standards (see 11.3, 10.3 of IEC 62717.2019); --- Replaced IEC TR61341 with the normative reference GB/T 19658 to facilitate the coordinated use of standards (see D.3, A.3 of IEC 62717.2019); --- Added requirements for light efficiency (see 9.3) to adapt to the specific technical conditions of my country; --- Change the informative Appendix I to normative Appendix C (see Appendix C, Appendix I of IEC 62717.2019) to adapt to the specific requirements of my country Technical conditions. The following editorial changes were made to this document. --- The name was changed to "Performance Specification for LED Modules for General Lighting"; --- Added the source of terms and definitions (see 3.1); --- Changed the term and definition "Note" of "composite failure rate" (see 3.9, 3.11 of IEC 62717.2019); --- Explanation of tc, replace 3.10 of IEC 62031.2009 with 3.38.9 of GB/T 24826-2016 (see 3.14 and 3.15); --- Deleted the "Note" of the term and definition "LED chip" (see 3.16, 3.18 of IEC 62717.2019); --- Deleted the "Note" for regional requirements in Table 1 (see 5.1, 4.1 of IEC 62717.2019); --- Replaced IEC 61000-3-2.2005 and IEC 61000-3-2 with the informative reference GB/T 17625.1-2022. 2005/AMD2.2009 (see 8.2 and E.3); --- Deleted the "Note" used for explanation in Figure 2 (see 11.2, 10.2 of IEC 62717.2019); --- Deleted the "Note" about constant luminous flux LEC modules in A.6 (see A.6, C.6 of IEC 62717.2019); --- Replaced IEC 61000-4-7 with the informative reference GB/T 17626.7 to facilitate the coordinated use of standards (see E.3). Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document was proposed by China Light Industry Federation. This document is under the jurisdiction of the National Technical Committee for Standardization of Lighting Appliances (SAC/TC224). This document was drafted by. Hangzhou Huapu Yongming Optoelectronics Co., Ltd., National Electric Light Source Quality Supervision and Inspection Center (Beijing), Baode Lighting Ming Group Co., Ltd., Huizhou NVC Optoelectronics Technology Co., Ltd., Shenzhen Jindingsheng Lighting Co., Ltd., Jiashan Boxing Electronic Technology Co., Ltd. Shenzhen Ziguang Lighting Technology Co., Ltd., Jiangxi Yuming Smart Optoelectronics Co., Ltd., Zhongpusen Technology (Zhuzhou) Co., Ltd., National Energy Conservation Center, Beijing Electric Light Source Research Institute Co., Ltd. The main drafters of this document are. Han Yanhua, Wang Guozhi, Zhang Aidong, Xiao Qiuxia, Wang Jie, Bao Xigang, Liu Hongchao, Chen Haichuan, Pi Yuanjun, Liu Mingzhao, Zhang Yunpeng, and Zhang Xiaogang. The previous versions of this document and the documents it replaces are as follows. ---First published in.2009 as GB/T 24823-2009, first revised in.2017; ---This is the second revision. Performance specification of LED modules for general lighting1 ScopeThis document specifies the performance requirements for LED modules, as well as the test methods and test conditions for verifying their compliance. This document applies to the following types of LED modules (see Figure 1). ---Type 1.Integrated type powered by 250V or less DC or 1000V or less 50Hz or 60Hz AC power supply LED modules; ---Type 2.It is driven by a control device connected to the mains voltage and contains internal components that enable it to operate at a constant voltage and constant (Semi-integrated) LED modules with control gear for current or constant power; ---Type 3.All control devices used to control the module to operate in a constant voltage, constant current or constant power state are independent of Module (non-integrated) LED module. The power supply of the semi-integrated LED module (Type 2) control device is an electronic device that can control the current, voltage or power within the designed range. The control unit of the semi-integrated LED module (type 2) control gear is the electronic device that controls the power input to the LEDs. LED modules with external control devices are non-integrated LED modules or semi-integrated LED modules. Figure 1 LED module types Usually, the life of LED modules is longer than the practical test time. The test time specified in 7.1 is therefore Not suitable for verifying the manufacturer's stated lifespan. This document selects the lumen maintenance code for a specified test time instead of life verification. However, the lumen maintenance code does not represent The predicted value of the actual life time. The category represented by the code is the luminous flux attenuation consistent with the information provided by the manufacturer before the test starts. The category of the feature. The pass/fail criteria for life tests specified in this document differ from the life measurement method stated by the manufacturer. For an explanation of the measurement method, see Appendix A. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 24823-2024_English be delivered?Answer: Upon your order, we will start to translate GB/T 24823-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 6 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 24823-2024_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 24823-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 24823-2024?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 24823-2024 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
