GB/T 24817.1-2016 English PDF

US$194.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 24817.1-2016: Cranes -- Control layout and characteristics -- Part 1: General principles
Status: Valid

GB/T 24817.1: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 24817.1-2016	194	Add to Cart	3 days	Cranes -- Control layout and characteristics -- Part 1: General principles	Valid
GB/T 24817.1-2009	239	Add to Cart	3 days	Lifting appliances -- Controls -- Layout and characteristics -- Part 1: General principles	Obsolete

Similar standards

GB/T 24818.4   GB/T 23724.1   GB/T 24809.2   GB/T 24817.2   GB/T 24817.3   GB/T 24817.5   

Basic data

Standard ID: GB/T 24817.1-2016 (GB/T24817.1-2016)
Description (Translated English): Cranes -- Control layout and characteristics -- Part 1: General principles
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J80
Classification of International Standard: 53.020.20
Word Count Estimation: 10,196
Date of Issue: 2016-10-13
Date of Implementation: 2017-05-01
Older Standard (superseded by this standard): GB/T 24817.1-2009
Regulation (derived from): National Standard Notice No.1716 of 2016
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China

GB/T 24817.1-2016: Cranes -- Control layout and characteristics -- Part 1: General principles

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Cranes - Control layout and characteristics - Part 1. General principles ICS 53.020.01 J80 National Standards of People's Republic of China Replace GB/T 24817.1-2009 Crane control device arrangement and characteristics Part 1. General (ISO 7752-1..2010, IDT) 2016-10-13 released 2017-05-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of the People 's Republic of China China National Standardization Management Committee released

Foreword

GB/T 24817 "crane control device layout and characteristics" is divided into the following five parts. - Part 1. General; - Part 2. Mobile cranes; - Part 3. Tower cranes; - Part 4. boom cranes; - Part 5. Bridge and gantry cranes. This part is part 1 of GB/T 24817. This part is drafted in accordance with the rules given in GB/T 1.1-2009. This part replaces GB/T 24817.1-2009 "Arrangement and characteristics of lifting machinery control devices Part 1. General". versus GB/T 24817.1-2009 compared to the main technical changes are as follows. --- modified the standard name; --- Added normative reference documents (see Chapter 2); --- increase the address code, wireless control, console, control devices, control stations, error detection code, frame, Hamming distance and other terms and definitions (See Chapter 3); - the original standard in the "basic requirements" to "general", and added the electric shock protection, temperature and other requirements (see 4.1); --- modified the "fatigue of the driver" in the original standard (see 4.2); - the addition of the "control device arrangement" (see 4.3); --- Increased requirements for portable consoles (see 5.1.2); --- Added requirements for the suspension console and cable (see 5.2); - Increased requirements for wireless control and wireless control systems (see 5.3 and Appendix A). This part uses the translation method equivalent to ISO 7752-1..2010 "Crane control device arrangement form and characteristics Part 1. Total Then "(English version). In this part of the normative reference to the international documents have a consistent correspondence between the following documents. Environmental testing for electric and electronic products - Part 2. Test methods - Test Ea and guidance. shocks - GB/T 2423.5-1995 (idtIEC 60068-2-27. 1987) GB/T 2423.7-1995 Environmental testing for electric and electronic products - Part 2. Test methods - Test Ec and guidance. And overturned (mainly for device type samples) (idtIEC 60068-2-31. 1982) Mechanical safety machinery and electrical equipment - Part 32. Technical requirements for lifting machinery (idt) GB 5226.2-2002. IEC 60204-32..1998) --- GB/T 15706-2012 General principles of mechanical safety design Risk assessment and risk reduction (ISO 12100..2010, IDT) For ease of use, this section has made the following editorial changes. - ISO 7752-1..2010 5.2.6 references 14.4.2 and 14.4.3 of IEC 60204-32..2008, which shall be 12.6.2 and 13.4.3 in IEC 60204-32..2008. Therefore, in the equivalent conversion made the appropriate changes. --- ISO 7752-1..2010 A.1 and A.3.2 respectively refer to 9.2.7.5 and 9.2.7 of IEC 60204-32..2008, respectively. Shall be 9.2.7 and 9.2.7.3 of IEC 60204-32..2008. Therefore, in the equivalent conversion made the appropriate changes. This part is made by the China Machinery Industry Federation. This part is headed by the National Standardization Technical Committee for Crane Machinery (SAC/TC227). This part is responsible for the drafting unit. Henan Province Mine Crane Co., Ltd., Beijing Lifting Transport Machinery Design and Research Institute. This part participates in the drafting unit. Guangxi Construction Engineering Group Construction Machinery Manufacturing Co., Ltd., Zhengzhou New Dafang Heavy Industry Technology Co., Ltd., Tianjin Port (Group) Co., Ltd. The main drafters of this part. Ren Haitao, Hu Yongtang, Cai Yasen, Li Gang, Lin Yong, Zhu Lianyi. This part was first released in December.2009 and this is the first revision. Crane control device arrangement and characteristics Part 1. General

1 Scope

This part of GB/T 24817 specifies the basic principles and requirements for crane control devices. This section deals with the arrangement for the load locating control device and serves as a standard for the development of a special type of crane control device With the foundation.

2 normative reference documents

The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article Pieces. For undated references, the latest edition (including all modifications) applies to this document. ISO 12100 Mechanical Safety Design General Risk Assessment and Risk Reduction (Safetyofmachinery-General principlesfordesign-Riskassessmentandriskreduction IEC 60068-2-27 Environmental tests - Part 2-27. Test methods - Test Ea and Guidance. Impacts (Environmentaltes- ting-Part 2-27. Tests-TestEaandguidance. Shock) IEC 60068-2-31 Environmental tests - Part 2-31. Test method test Ec. Dumping and overturning mainly for equipment type (Environmentaltesting-Part 2-31. Tests-TestEc. Roughhandlingshocks, the firstforequip- ment-typespecimens) IEC 60204-32..2008 Mechanical safety machinery and electrical equipment - Part 32. Lifting machinery technical conditions (Safetyofma- chinery-electricalequipmentofmachines-Part 32. Requirementsforhoistingmachines

3 terms and definitions

The following terms and definitions apply to this document. 3.1 Operator operator Manipulate the crane to achieve the load location of the staff. 3.2 Address code For the receiver to distinguish the number of frames sent by the transmitter. Note. The receiver only executes commands issued from emitters with the same address code. 3.3 Wireless control In the event that there is a certain distance between the console and the crane, the crane operator's command is achieved without any tangible connection The way of transmission. 3.4 Console console Fixed or movable arrangement of control devices. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 24817.1-2016_English be delivered?

Answer: Upon your order, we will start to translate GB/T 24817.1-2016_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 24817.1-2016_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 24817.1-2016_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 24817.1-2016?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 24817.1-2016 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.