GB/T 24809.5-2009 English PDF

US$134.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 24809.5-2009: Cranes -- Requirements for mechanisms -- Part 5: Bridge and gantry cranes
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 24809.5-2009	134	Add to Cart	3 days	Cranes -- Requirements for mechanisms -- Part 5: Bridge and gantry cranes	Valid

Similar standards

GB/T 24818.4   GB/T 23724.1   GB/T 24809.2   GB/T 24814   GB/T 24809.4   GB/T 24809.1   

Basic data

Standard ID: GB/T 24809.5-2009 (GB/T24809.5-2009)
Description (Translated English): Cranes -- Requirements for mechanisms -- Part 5: Bridge and gantry cranes
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J80
Classification of International Standard: 53.020.20
Word Count Estimation: 7,744
Date of Issue: 2009-12-15
Date of Implementation: 2010-07-01
Quoted Standard: GB 5226.2; GB/T 6974.1; GB/T 24809.1; GB/T 24810.5; ISO 12210-1-1998; ISO 12488-1-2005
Adopted Standard: ISO 10972-5-2006, IDT
Regulation (derived from): Announcement of Newly Approved National Standards No. 15 of 2009
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies: GB/T 6974. 1 defined bridge and gantry cranes and institutional overall layout and design, component selection and design requirements and manufacture, assembly, installation and testing instructions, etc. special requirements related, crane General requirements for bodies by GB/T 24809. 1 regulations. GB/T 24809 This standard does not include the carrying capacity calculation ultimate validation rules in different states.

GB/T 24809.5-2009: Cranes -- Requirements for mechanisms -- Part 5: Bridge and gantry cranes

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Cranes.Requirements for mechanisms.Part 5. Bridge and gantry cranes ICS 53.020.20 J80 National Standards of People's Republic of China GB/T 24809.5-2009/ISO 10972-5.2006 Requirements for crane bodies Part 5. Bridge and gantry cranes (ISO 10972-5.2006, IDT) Posted 2009-12-15 2010-07-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB/T 24809 "Crane institutional requirements" is divided into five sections. --- Part 1. General; --- Part 2. Mobile cranes; --- Part 3. Tower cranes; --- Part 4. jib cranes; --- Part 5. Bridge and gantry cranes. This is Part 5 GB/T 24809 of. This part identical with ISO 10972-5.2006 "Cranes institutional requirements - Part 5. Bridge and gantry cranes" (English Version). This section is equivalent translation ISO 10972-5.2006. For ease of use, this section made the following editorial changes. --- The term "this part of ISO 10972" with the words "GB/T 24809 in this section"; --- Delete ISO 10972-5.2006 Foreword; --- For ISO 10972-5.2006 international standard references, have been adopted as the equivalent of the standard with our standard replaces the corresponding International standards, the other is not identical with direct reference to international standards for our standards. This part is proposed by China Machinery Industry Federation. This part of the National Standardization Technical Committee crane (SAC/TC227) centralized. This part mainly drafted by. DHI DCW Group Co., Ltd. The main drafters of this section. Guipei Kang, Wang Xuesong. GB/T 24809.5-2009/ISO 10972-5.2006 Requirements for crane bodies Part 5. Bridge and gantry cranes

1 Scope

GB/T 24809 provisions of this part of the GB/T 6974.1 general arrangement and set defined Bridge and gantry cranes and agencies Guide the design, selection and design requirements as well as parts manufacturing, assembly, installation and testing and other special requirements relating to the description, crane bodies General requirements according to GB/T 24809.1 requirements. This section GB/T 24809 does not include verification at different limit states (yield strength, fatigue, wear, etc.) carrying capacity calculations rule.

2 Normative references

The following documents contain provisions which, through reference GB/T 24809 in this section constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. GB 5226.2 Safety of machinery electrical equipment Part 32. Requirements for hoisting machines (GB 5226.2-2002, idt IEC 60204-32.1998) GB/T 6974.1 crane terminology - Part 1. General terms (GB/T 6974.1-2008, ISO 4306-1.2007, IDT) GB/T 24809.1 crane institutional requirements - Part 1. General (GB/T 24809.1-2009, ISO 10972-1. 1998, IDT) GB/T 24810.5 crane limiter and indicators - Part 5. Bridge and gantry cranes (GB/T 24810.5- 2009, ISO 10245-5.1995, IDT) ISO 12210-1.1998 Part 1 anchoring device Cranes state and non-state. General ISO 12488-1.2005 Cranes and crane wheels and trolley track tolerances - Part 1. General

3 Terms and Definitions

Terms and definitions GB/T 6974.1 established in this section apply.

4 Requirements

4.1 General Design and Arrangement 4.1.1 General Institutions should comply with the relevant provisions of GB/T 24809.1 of. 4.1.2 Load Control Limiters and indicators should be set in line with GB/T 24810.5 of the relevant provisions. When the limiter malfunction could lead to the stability of the crane is lowered, at least one of the following methods should be used to ensure that the system of reliability. Key components a) from the weight of limiter and double system design, or set up a backup limiter; b) automatic detection system functions; GB/T 24809.5-2009/ISO 10972-5.2006 ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 24809.5-2009_English be delivered?

Answer: Upon your order, we will start to translate GB/T 24809.5-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 24809.5-2009_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 24809.5-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.