GB/T 24603-2016 English PDFUS$439.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 24603-2016: Boosting pressure water supply equipment for rectangular tank Status: Valid GB/T 24603: Historical versions
Basic dataStandard ID: GB/T 24603-2016 (GB/T24603-2016)Description (Translated English): Boosting pressure water supply equipment for rectangular tank Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: P41 Classification of International Standard: 91.140.01 Word Count Estimation: 22,264 Date of Issue: 2016-10-13 Date of Implementation: 2017-09-01 Older Standard (superseded by this standard): GB/T 24603-2009 Regulation (derived from): National Standard Notice No.1716 of 2016 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China GB/T 24603-2016: Boosting pressure water supply equipment for rectangular tank---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Boosting pressure water supply equipment for rectangular tank ICS 91.140.01 P41 National Standards of People's Republic of China Replacing GB/T 24603-2009 Boxed pouring water supply equipment 2016-10-13 released 2017-09-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of the People 's Republic of China China National Standardization Management Committee released Directory Preface III 1 Scope 1 2 normative reference document 1 3 Terms and definitions 1 4 classification and model 2 5 conditions of use and equipment composition 2 6 requirements 3 7 Test Method 7 8 Inspection rules 11 Marking, packaging, transportation and storage Appendix A (informative) Equipment composition 15 Appendix B (informative) Test instrument and device 16 ForewordThis standard is drafted in accordance with the rules given in GB/T 1.1-2009. This standard replaces GB/T 24603-2009 "box type pouring water supply equipment", compared with GB/T 24603-2009, the main technical changes as follows. - Added Chapter 5, "Conditions of Use and Equipment Composition," incorporating the original 5.1 to 5.2 into Chapter 5; the original Chapter 5, 5.3 to 5.12, Chapter 6; - incorporates 6.2.4 and 6.2.15 terms, pipe network protection and power protection functions (see 6.2.4.); - increased requirements for remote monitoring and data transmission (see 6.2.10); --- Increased equipment efficiency requirements and test methods (see 6.2.16); - increased equipment energy requirements and test methods (see 6.2.17); --- Added frequency conversion configuration requirements and test methods (see 6.3.3); - modify the tank assembly with disinfection facilities as a prerequisite (see 6.2.14). This standard is proposed by the Ministry of Housing and Urban and Rural Development of the People's Republic of China. This standard by the National Urban Water Supply and Sewerage Standardization Technical Committee (SAC/TC434) centralized. This standard is responsible for drafting units. Shanghai Panda Machinery (Group) Co., Ltd., Fujian Province, the people of Construction Engineering Co., Ltd. This standard participates in the drafting unit. Beijing Water Supply Group, Shanghai Water Supply Management Office, Guangzhou Water Supply Company, Ningbo City Water Supply Co., Ltd., Harbin Water Supply Group, Nanchang Water Industry Group Co., Ltd., Guangxi Greentown Water Co., Ltd. The main drafters of this standard. Tan Hongquan, Liu Hanying, Tan Shaohua, Tu Bin, Huang Daigui, Wu Jing, He Helin, Ma Zizhong, Yin Rongqiang, Meng Zhaoshi, Cong Fuxiang, Lu Hanqing, Zheng Haijun, Li Gang, Huang Donghai, Xu Binyuan, Zhou Yun, Zhang Dongling. This standard was first released in.2009, this time for the first revision. Boxed pouring water supply equipment1 ScopeThis standard specifies the terminology and definition of box-type laminated water supply equipment, classification and model, conditions of use and equipment composition, requirements, test Law, inspection rules and signs, packaging, transportation and storage. This standard applies to the design, production and inspection of box-type pressurized water supply equipment.2 normative reference documentsThe following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article Pieces. For undated references, the latest edition (including all modifications) applies to this document. Pressure vessels - Part 1. General requirements Pressure vessels - Part 2. Materials GB/T 191 packaging and storage icon GB/T 2423.1 Environmental testing for electric and electronic products - Part 2. Test methods - Test A. Low temperature GB/T 2423.2 Environmental testing for electric and electronic products - Part 2. Test methods - Test B. High temperature GB/T 2423.3 Environmental testing for electric and electronic products - Part 2. Test methods - Test Cab. constant damp heat test GB/T 3047.1 The basic dimensions of panels, racks and cabinets with a height of 20 mm Method for determination of water flow in GB/T GB/T 3216 rotary power pump hydraulic performance acceptance test 1 and 2 Electrical control equipment GB/T 3797 GB 4208 enclosure protection class (IP code) GB/T 5656 centrifugal pump technical conditions (Ⅱ) GB/T 13306 signs GB/T 17219 Safety evaluation criteria for drinking water distribution equipment and protective materials GB 19762 Water purification pump energy efficiency limit value and energy saving evaluation value CJ/T 254 pipe network stacking water supply equipment CJ/T 352 computer control frequency control water supply equipment JB/T 8098 Pump noise measurement and evaluation method JJG49 Elastic Element Precision Pressure Gauge and Vacuum JJG795 withstand voltage tester JJG984 earthing resistance tester JJG1005 electronic insulation resistance table JJG1033 electromagnetic flowmeter3 terms and definitionsThe following terms and definitions apply to this document. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 24603-2016_English be delivered?Answer: Upon your order, we will start to translate GB/T 24603-2016_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 24603-2016_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 24603-2016_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 24603-2016?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 24603-2016 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
