GB/T 24553-2009 English PDFUS$169.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 24553-2009: Motorcycles and mopeds -- Limitative device to steering and maximum wheel steer angle -- Requirements and measurement methods Status: Valid
Basic dataStandard ID: GB/T 24553-2009 (GB/T24553-2009)Description (Translated English): Motorcycles and mopeds -- Limitative device to steering and maximum wheel steer angle -- Requirements and measurement methods Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: T80 Classification of International Standard: 43.140 Word Count Estimation: 7,712 Date of Issue: 2009-10-30 Date of Implementation: 2010-07-01 Quoted Standard: GB/T 8170; GB/T 15028 Regulation (derived from): National Standard Approval Announcement 2009 No.12 (Total No.152) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the steering wheel motorcycles and limit device measurement conditions and technical requirements and maximum steering angle, test methods. This standard applies to motorcycles and mopeds. GB/T 24553-2009: Motorcycles and mopeds -- Limitative device to steering and maximum wheel steer angle -- Requirements and measurement methods---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Motorcycles and mopeds. Limitative device to steering and maximum wheel steer angle. Requirements and measurement methods ICS 43.140 T80 National Standards of People's Republic of China Motorcycles and steering wheel spacing device The maximum steering angle and the technical requirements and determination methods Posted 2009-10-30 2010-07-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordAppendix A of this standard is an informative annex. This standard was proposed by the National Development and Reform Commission. This standard by the National Automotive Standardization Technical Committee. This standard is drafted by. Shanghai Motor Vehicle Inspection Center, the National Motorcycle Quality Supervision and Inspection Center. Participated in the drafting of this standard. National Motorcycle Quality Supervision and Inspection Center (Chongqing). Drafters of this standard. Zhangjia Lei Gong Jianjun, Fu Hanan, Chen Zufu money Jubilee, He Dajun, Wang Jiajia. Motorcycles and steering wheel spacing device The maximum steering angle and the technical requirements and determination methods1 ScopeThis standard specifies the steering wheel motorcycles and spacing device and the maximum steering angle measurement conditions and technical requirements, test method. This standard applies to motorcycles and mopeds.2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 8170 repair value expressed about the rules and limit values \u200b\u200band judgment GB/T 15028 motorcycle steering stability term3 Terms and DefinitionsGB/T 15028 and established in the following terms and definitions apply to this standard. 3.1 Means for controlling the direction of travel of the motorcycle, usually including the direction, steering column, front shock absorber, wheel and other parts. 3.2 Vehicle itself has used to limit steering wheel steering. 3.3 When rotating the front wheel, the vehicle maximum steering angle (left, right).4 Requirements4.1 parts steering apparatus shall be prescribed by the procedures approved products manufacturing drawings and technical documents, and shall comply with the requirements of this standard Claim. 4.2 steering system should be flexible rotation, no blocking phenomenon. Rotation of the rotary member process, in addition to the steering wheel spacing device, the other parts should not Interfere. 4.3 axial direction of the column should be no loosening. 4.4 motorcycle in a flat, hard, dry and clean surface with straight deviation should not, should not have their steering oscillation of road feel or ineffective Other anomalies. 4.5 normal operation of the steering apparatus shall not permanent deformation or cracking. 4.6 steering wheel torque limiting device should be able to withstand the steering shaft 200N · m is applied, the deformation does not occur, failure. 4.7 motorcycles and mopeds steering wheel to the left or right of the steering angle is greater than allowed. a) three-wheeled motorcycle, three mopeds. 45 °; ...... |
