GB/T 24495-2009 English PDFUS$174.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 24495-2009: Horizontal joints between load-bearing walls and concrete floors -- Laboratory mechanical tests -- Effect of vertical loading and of moments transmitted by the floors Status: Valid
Basic dataStandard ID: GB/T 24495-2009 (GB/T24495-2009)Description (Translated English): Horizontal joints between load-bearing walls and concrete floors -- Laboratory mechanical tests -- Effect of vertical loading and of moments transmitted by the floors Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: P20 Classification of International Standard: 91.060.01 Word Count Estimation: 9,951 Date of Issue: 2009-10-30 Date of Implementation: 2010-04-01 Adopted Standard: ISO 7845-1985, IDT Regulation (derived from): National Standard Approval Announcement 2009 No.12 (Total No.152) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard applies to horizontal joints between load-bearing walls and concrete floors. This joint can be passed to the floor the moment the wall. Wall may be exterior or interior walls, floor support one or both sides. GB/T 24495-2009: Horizontal joints between load-bearing walls and concrete floors -- Laboratory mechanical tests -- Effect of vertical loading and of moments transmitted by the floors---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Horizontal joints between load-bearing walls and concrete floors. Laboratory mechanical tests. Effect of vertical loading and of moments transmitted by the floors ICS 91.060.01 P20 National Standards of People's Republic of China GB/T 24495-2009/ISO 7845. 1985 Horizontal seam between the load-bearing walls and concrete floors Laboratory mechanical tests The impact transmitted by the floors vertical loading and of moments (ISO 7845. 1985, IDT) Posted 2009-10-30 2010-04-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis standard is equivalent to using ISO 7845. 1985 Mechanical Test Laboratory horizontal seams "between the load-bearing walls and concrete floor by floor Came the vertical load and moment of impact "(in English). This standard of ISO 7845. 1985 made the following editorial changes. --- "This International Standard" by "this standard"; --- Remove ISO 7845. 1985 foreword, preface to increase the national standard. The standard proposed by the Ministry of Housing and Urban-Rural Development of the People's Republic of China. This standard is under the jurisdiction of the Ministry of Construction of housing building products Standardization Technical Committee, components and products with the urban and rural areas. This standard drafting unit. China Academy of Building Standard Design. The main drafters of this standard. Zhuang Guowei, Hu Miao, Wu Xiaoyang, Fu Heng Lai. GB/T 24495-2009/ISO 7845. 1985 Horizontal seam between the load-bearing walls and concrete floors Laboratory mechanical tests The impact transmitted by the floors vertical loading and of moments 0 Introduction For load-bearing walls and floor structure analysis shows that wall and floor joints indirectly play an important role. With the full understanding of the performance of the joint case, we can analyze the impact of these seams using modern computing methods. The purpose of this standard is to provide A test method for determining the performance of the major joints. This standard does not involve the analysis and use of test results. Because it is difficult for such a large number of tests, so the standard does not specify a minimum test times Number, but it should be noted that dispersion often affect the results of such tests, the number of times to repeat these experiments will be desirable, it would be better Represent the actual situation. Modern computational method relies on the mechanical properties of the joints between load-bearing walls and floor level of knowledge, which refers to cracking and damage related to the limit State and excessive deformation properties. In addition, the wall itself verify the limit states to consider the deformation of the interaction between the wall and floor joints influences. This standard provides a test method for determining the appropriate mechanical properties.1 OverviewThis standard provides test methods for determining the level of load-bearing walls and concrete floors between the seams withstand the vertical load and pass by the floors To the moment when the mechanical properties.2 rangeThis standard applies to horizontal seam between load-bearing walls and concrete floors, the floor joints can be passed to the moment the wall. Interior walls may be Or walls, floor support one or both sides. These walls can be small or medium-sized blocks made of masonry (stone, solid, hollow or porous brick, concrete or light coagulation Soil solid or hollow blocks), it can also be a large preform (the board). The board came T vertical load and bending moment M (see Figure 1). N --- Wall came vertical load; M --- moment; T --- floor came the vertical load; Figure 1 seams Loaded situation GB/T 24495-2009/ISO 7845. 1985 ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 24495-2009_English be delivered?Answer: Upon your order, we will start to translate GB/T 24495-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 24495-2009_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 24495-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
