GB/T 24494-2009 English PDFUS$349.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 24494-2009: Deformation test method for doors between two different climates Status: Valid
Basic dataStandard ID: GB/T 24494-2009 (GB/T24494-2009)Description (Translated English): Deformation test method for doors between two different climates Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: Q70 Classification of International Standard: 91.060.50 Word Count Estimation: 15,122 Date of Issue: 2009-10-30 Date of Implementation: 2010-04-01 Quoted Standard: GB/T 5823; GB/T 7106; GB/T 9158; GB/T 22636 Adopted Standard: ISO 6445-2005, MOD Regulation (derived from): National Standard Approval Announcement 2009 No.12 (Total No.152) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the terms and definitions deformation detection methods inside and outside the doors and sides of the door in the entire file of different climatic conditions, detection principle, instruments and equipment, detection preparations, detection methods and accuracy requirements, inspection side conditions, detection step and detection reports. This standard applies to the deformation detection methods inside and outside the doors and sides of the door in the entire file of different climatic conditions. GB/T 24494-2009: Deformation test method for doors between two different climates---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Deformation test method for doors between two different climates ICS 91.060.50 Q70 National Standards of People's Republic of China Doors on both sides under different climatic conditions Deformation detection method (ISO 6445.2005, Doors-Behaviourbetweentwodifferentclimates-Testmethod, MOD) Posted 2009-10-30 2010-04-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis revised standard adopts ISO 6445.2005 (E) "performance test methods doors under different climatic conditions" (in English). This standard root According to ISO 6445.2005 (E) redrafted. According to our country, the present standard in the use of international standards ISO 6445. made some modifications 2005 (E), the main modifications are as follows. --- According to our standard rules for preparation, in Chapter 1, added, "This standard specifies the" period; --- ISO 6445.2005 (E) Chapter 2 refers to ISO 9379 standard, this standard closing force detection method references GB/T 9158 "Building withstand mechanical force detection method using window"; --- Increasing the detection of climate d1, in order to meet the climatic conditions of different regions. For ease of use, this standard also made the following editorial changes. --- Delete foreword international standards; --- "This International Standard" be replaced by "this standard"; --- With a decimal point "." Instead of a comma as the decimal point "." This standard appendix A ~ Appendix F are informative appendices. The standard proposed by the Ministry of Housing and Urban-Rural Development of the People's Republic of China. This standard is under the jurisdiction of the Ministry of Construction of housing building products Standardization Technical Committee, components and products with the urban and rural areas. This standard is drafted by. China Academy of Building Research, China Building Standard Design and Research Institute. Participated in the drafting of this standard. Guangdong Provincial Academy of Building Research Shanghai Research Institute of Building Sciences Ltd., Henan Building Science Research Institute, Guangdong Province, Dongguan City, Kennedy Long Metal Products Co., Ltd., Fujian Nanping Aluminum Co., gifted victory aluminum windows and doors Technology (Shanghai) Co., the company. The main drafters of this standard. Wang Hongtao, Liu Huitao, Zhuang Guowei, on Tan Fei, Zhang Shixiang, Xu Qin, Liu Xinsheng, Duwan Ming, Xie Guangyu, Jiang Yusheng. Doors on both sides of the deformation detection methods under different climatic conditions1 ScopeThis standard specifies the terms and definitions deformation detection methods doors and external sides of the door the entire file in different climatic conditions, the detection of the original Science, instruments and equipment, test preparation, test methods and accuracy requirements, testing conditions, test procedures and test reports. This standard applies to leaf deformation detection method and external sides of the door in the whole profile of the different climatic conditions.2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 5823 building windows and doors term GB/T 7106 building external doors and windows airtight, watertight, wind pressure performance classification and test methods GB/T 9158 building to withstand mechanical force detection method using window GB/T 22636 door size, straight angles and flatness detection method (GB/T 22636-2008, ISO 6442.2005, Door leaves-Generalandlocalflatness-Measurementmethod; ISO 6443.2005, Doorleaves-Methodfor measurementofheight, width, thicknessandsquareness, MOD)3 Terms and DefinitionsGB/T 5823 and established the following terms and definitions apply to this standard. 3.1 Two side of the door (first side/second side) with respect to the direction of the different climatic conditions determined by the standard 6.1. 3.2 Overall Bending flatness method according to GB/T 22636 stipulated on the longer side of the leaf measured. Relative to the direction of the door, it But the positive but also negative. See Figure 1. 1 --- first face; 2 --- a second surface; 3 --- negative curvature; 4 --- positive curvature; 5 --- baseline. Positive and negative curvature is defined in Figure 1 ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 24494-2009_English be delivered?Answer: Upon your order, we will start to translate GB/T 24494-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 24494-2009_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 24494-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
