GB/T 24463.3-2009 English PDF
Basic dataStandard ID: GB/T 24463.3-2009 (GB/T24463.3-2009)Description (Translated English): Interactive electronic technical manuals -- Part 3: Common source database requirement Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: L67 Classification of International Standard: 35.240.01 Word Count Estimation: 222,269 Date of Issue: 2009-10-15 Date of Implementation: 2009-12-01 Quoted Standard: GB/T 15121.3; GB/T 18793 Regulation (derived from): Announcement of Newly Approved National Standards No. 11 of 2009 (No. 151 overall) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard provides public building interactive electronic technical manual source database requirements, presented data module storage and management approach. This section applies to interactive electronic technical manuals and technical information modular data processing. This section contains the following elements: data module, Data Module Requirements List, illustrations, publications module, data compiled module code requirements, illustrations compiled code requirements, publications compiled module code requirements. GB/T 24463.3-2009: Interactive electronic technical manuals -- Part 3: Common source database requirement---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Interactive electronic technical manuals Part 3. Common source database requirement ICS 35.240.01 L67 National Standards of People's Republic of China Interactive Electronic Technical Manual Part 3. Common Source Database requirements Posted 2009-10-15 2009-12-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released Table of ContentsIntroduction Ⅲ Introduction Ⅳ 1 Scope 1 2 Normative references 1 3 Terms, Definitions and Abbreviations 1 3.1 Terms and definitions 3.2 Abbreviations 2 4 2 General requirements 4.1 Overview 2 4.2 Data Exchange Requirements 2 4.3 module data structures and data elements naming requirements 2 Maintainability data 2 4.4 5 Common Source Database 2 5.1 Overview 2 5.2 Data Module 2 5.3 Illustration 7 5.4 Data Module Requirements List 7 5.5 Publications module 7 6 7 Data Management 6.1 Data Module Code 7 6.2 Illustrations and Clipart Code 9 6.3 Data Module Requirements List identifiers 9 6.4 Publications module code 10 Appendix A (normative) element name dictionary 11 Appendix B (normative) data module DTD 23 References 221ForewordGB/T 24463-2009 "Interactive Electronic Technical Manual" is divided into three sections. --- Part 1. Interoperability architecture; --- Part 2. User Interface and functional requirements; --- Part 3. Common Source Database requirements. This section GB/T 24463-2009 Part 3. This section of the Appendix A, Appendix B is a normative appendix. This section is proposed and managed by the China National Institute of Standardization. This section is drafted. Armored Force Engineering Institute, China National Institute of Standardization, Tianjian Shiyuki Technology Limited. The main drafters of this section. Xuzong Chang, Li Wenwu, An Zhao, Zhang Wenjun, Zhang Ying, Guo Hongfen, Lei Yusheng, Zhou Jian, Xie Hong Cheng, Cao Jun risk, Huliang Yong, Wang Xiaojing, Zhang Weiguo, He Ping, Jiang Weiwei, Hongyan.IntroductionWith the development of science and technology, there have been many large and complex high-tech equipment. To address these equipment using paper Technical Manual The existence of high cost, large size and weight, timely delivery and transfer of poor, vulnerable contamination, inconvenient to use, and many other disadvantages can not adapt equipment The use and maintenance requirements, since the 20th century, the mid-1980s, the United States and developed countries in the world in the implementation of CALS (currently, CALS called Continuous Acquisition and Life Cycle Support) information technology policy, will be interactive electronic technical manuals (IETM) as an important Key technologies to be promoted. With the development and wide application IETM technology has become increasingly showing its role in enhancing the use of equipment, maintenance, so Great advantages of efficiency and effectiveness of fault diagnosis and training of personnel, therefore, currently IETM has become the world including China Military and civilian equipment manufacturing information technology to promote a country's technology, its application prospects. This section provides interactive electronic technical manual source data source by way of a public database for storage and management. The number of sources in the public According to the library under way, this part of the contents of data module, Data Module Requirements List module and publications module were specified the data Module code, illustration code, the code structure code, publications and various data DTD module for data management module and so on. Interactive Electronic Technical Manual Part 3. Common Source Database requirements1 ScopeThis section GB/T 24463 specifies the build interactive electronic technical manual Common Source Database requirements presented data memory module Information storage and management. This section applies to the modular data processing IETM technical information. This section contains the following. --- Data module; --- Data Module Requirements List; ---illustration; --- Publications module; --- Data compiled module code requirements; --- Illustration Coding of requirements; --- Publication compiled module code requirements.2 Normative referencesThe following documents contain provisions which, through reference GB/T 24463 in this section constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. GB/T 15121.3 Information technology - Computer graphics storage and transfer of picture description information of the third part of the volume. Binary Code (GB/T 15121.3-1996, idtISO /IEC 8632-3.1992) GB/T 18793 IT Extensible Markup Language (XML) 1.0 3 Terms, definitions and abbreviations 3.1 Terms and Definitions The following terms and definitions apply GB/T 24463 in this section. 3.1.1 Information storage and management of all objects interactive electronic technical manuals. 3.1.2 , Independent information unit technical manual minimal. Module data including text, graphics and other types of data, and having a common Structure. 3.1.3 Standardized and structured data definition module is uniquely identifies the data module. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 24463.3-2009_English be delivered?Answer: Upon your order, we will start to translate GB/T 24463.3-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 24463.3-2009_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 24463.3-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
