GB/T 24365-2009 English PDF

US$299.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 24365-2009: Testing methods of optoelectronic detector module for communication
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 24365-2009	299	Add to Cart	3 days	Testing methods of optoelectronic detector module for communication	Valid

Similar standards

YD/T 2554.1   GB/T 9771.1   GB/T 20186.1   GB/T 12357.1   GB/T 24366   GB/T 24367.1   

Basic data

Standard ID: GB/T 24365-2009 (GB/T24365-2009)
Description (Translated English): Testing methods of optoelectronic detector module for communication
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: M33
Classification of International Standard: 33.180.01
Word Count Estimation: 13,168
Date of Issue: 2009-09-30
Date of Implementation: 2009-12-01
Quoted Standard: GB/T 24366-2009
Regulation (derived from): Announcement of Newly Approved National Standards No. 10 of 2009 (No. 150 overall)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the communication parameters photodetector assembly test methods, including optical parameters, electrical parameters. This standard applies to communications photodetector components.

GB/T 24365-2009: Testing methods of optoelectronic detector module for communication

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Testing methods of optoelectronic detector module for communication ICS 33.180.01 M33 National Standards of People's Republic of China Test method for photoconductor components for communication 2009-09-30 release 2009-12-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of the People 's Republic of China China National Standardization Management Committee released Directory Preface III 1 Scope 1 2 normative reference document 1 3 terms and definitions, abbreviations 1 Test Method 1 4.1 Test environment requirements 1 4.2 Test equipment requirements 1 4.3 Test method 1 Appendix A (informative) Reference curve Figure 9 A. 1 spectral response range curve Figure 9 A. 2 photoelectric multiplication factor curve

Foreword

The "Photographic Detector Components for Communications" series of standards include. --- "Communication photodetector components test method"; --- "Technical requirements for photodetector components for communication". This standard and GB/T 24366 "communication with photodetector components technical requirements" supporting the use of. This standard in the preparation process, mainly with reference to IEC 62007-2 "for the optical fiber system of semiconductor optoelectronic devices Part 2. Test Methods". In the drafting process, this standard takes note of the harmonization with the following standards. GB/T 15651-1995 "Semiconductor discrete devices and integrated circuits - Part 5. Optoelectronic devices"; Semiconductor discrete devices and integrated circuits - Part 5-3. Test methods for optoelectronic devices GB/T 15651.3-2003. Appendix A to this standard is an informative appendix. This standard is proposed by the Ministry of Industry and Information Technology of the People's Republic of China. This standard is under the jurisdiction of China Communications Standardization Association. The drafting of this standard unit. Shenzhen Xinfei Electronic Technology Co., Ltd., Wuhan Posts and Telecommunications Research Institute. The main drafters of this standard. Li Chunfang, Liang Ze, Zhong Di new, Zhen Lei, Deng Hongbing, Miao Yuzhu, Yang Chuwen. Test method for photoconductor components for communication

1 Scope

This standard specifies the communication photogenerator components related to the test parameters, including optical parameters, electrical parameters. This standard applies to communications photodetector components.

2 normative reference documents

The terms of the following documents are hereby incorporated by reference into this standard. Whichever is the date of the reference file, which is followed by all (Excluding corrigenda) or revisions do not apply to this standard, however, encourage the parties to reach an agreement under this standard Whether you can use the latest version of these files. For undated references, the latest edition applies to this standard. Technical requirements for photodetector components for communications GB/T 24366-2009 3 terms and definitions, abbreviations GB/T 24366-2009 established terms and definitions, abbreviations applicable to this standard.

4 test method

4.1 Test the environment requirements Temperature. 15 ° C to 35 ° C Relative humidity. 45% to 75% Atmospheric pressure. 86kPa ~ 106kPa When testing can not be carried out under standard atmospheric conditions, test environment conditions should be stated on the test report. 4.2 Test equipment requirements All kinds of test equipment, should be within the specified period of validity, the test accuracy should be higher than the accuracy of the measured parameters of an order of magnitude. 4.3 Test methods 4.3.1 Test of light response wavelength 4.3.1.1 Test Block Diagram The test block diagram is shown in Figure 1. Figure 1 Light response wavelength test block diagram 4.3.1.2 Test procedure a) the measured detector with the specified operating voltage; b) the different wavelengths, the same power of monochromatic light into the measured detector, the measured detector output signal into the scanner; c) The scanner records the spectral response curves of different wavelengths and the same power, and the curve is read from the curve to a maximum of 50% Range, which is the spectral response range of the measured detector (see Figure A.1 in Appendix A). 4.3.2 Sensitivity (minimum detectable optical power) test 4.3.2.1 Test for sensitivity (minimum detectable optical power) for digital transmission detector components a) Test block diagram ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 24365-2009_English be delivered?

Answer: Upon your order, we will start to translate GB/T 24365-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 24365-2009_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 24365-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.