GB/T 2428-2024 English PDF

US$359.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 2428-2024: Head-face dimensions of adults
Status: Valid

GB/T 2428: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 2428-2024	359	Add to Cart	4 days	Head-face dimensions of adults	Valid
GB/T 2428-1998	559	Add to Cart	3 days	Head-face dimensions of adults
GB/T 2428-1981	RFQ	ASK	3 days	Head configurations--Chinese adults	Obsolete

Similar standards

GB/T 10000   GB/T 5703   GB/T 36606   GB/T 5700   

Basic data

Standard ID: GB/T 2428-2024 (GB/T2428-2024)
Description (Translated English): Head-face dimensions of adults
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: A25
Classification of International Standard: 13.180
Word Count Estimation: 18,116
Date of Issue: 2024-09-29
Date of Implementation: 2025-04-01
Older Standard (superseded by this standard): GB/T 2428-1998
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 2428-2024: Head-face dimensions of adults

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 13.180 CCSA25 National Standard of the People's Republic of China Replaces GB/T 2428-1998 Adult head and face dimensions Released on 2024-09-29 2025-04-01 Implementation State Administration for Market Regulation The National Standardization Administration issued

Table of Contents

Preface III 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Head and face measurement items and dimensions 2 5 Two-dimensional distribution of human head and face dimensions 5 Appendix A (Informative) Diagram of head and face measurement items 7 Appendix B (Informative) Calculation of dimensions of human head and face items 9 Reference 12

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting. This document replaces GB/T 2428-1998 "Head and face dimensions of adults". Compared with GB/T 2428-1998, except for the structural adjustment and In addition to logical changes, the main technical changes are as follows. --- Changed all human body size statistics (see Tables 1 and 2 of 4.2, Tables 3 to 6 of 5.3, Tables B.1 and B.2 of Appendix B). B.2, Tables 1 to 6 of the.1998 edition, Tables C.1 and C.2 of Appendix C); --- Added three head and face measurement items. glabellar top neck arc length, head crown circumference, and eye top height (see Table 1 and Table 2 of 4.2); ---Deleted the following items. head oblique length, outer width of two ears, minimum width of forehead, facial length I, upper length of facial face, deep nose, outer width of two eyes, inner width of two eyes, mouth width, lip height, ear base length, tragus zygomatic point length, tragus mandibular angle length, head top-occipital point submental circumference, tragus ear point height (see Tables 1 and 2 of the.1998 edition); --- Deleted "Two-dimensional distribution table of submental circumference and facial width between the top of the head and the occipital point" (see 5.3.3 of the.1998 edition); --- Deleted Appendix B “Head and face measurement items and their corresponding relationship with GB 3975” (see Appendix B of the.1998 edition). Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document is proposed and coordinated by the National Technical Committee on Ergonomics Standardization (SAC/TC7). This document was drafted by. China National Institute of Standardization, Jingzhou Sichuang Technology Development Co., Ltd., Beijing Academy of Science and Technology Urban Safety Institute of Environmental Sciences, Tsinghua University, Sanmen Kangchuang Electronic Technology Co., Ltd., Donghua University, Air Force Medical University, Air Force Specialty Medical Center Center, Zhongbiao Energy Efficiency Technology (Beijing) Co., Ltd., Tsinghua University Suzhou Automotive Research Institute (Xiangcheng), Chinese People's Liberation Army Academy of Military Science and Chemical Defense Research Institute, Beijing University of Science and Technology, Huayan Huike (Anhui) Intelligent Technology Co., Ltd., Peking University Stomatological Hospital, and SDIC won the bid for quality infrastructure Research Institute Co., Ltd., Northeast Normal University, Beijing University of Civil Engineering and Architecture, Zhongbiao Energy Efficiency Technology (Qingdao) Co., Ltd., and China Institute of Labor Relations. The main drafters of this document are. Ran Linghua, Zhang Xin, Liu Taijie, Zhao Chaoyi, Hu Huimin, Chen Shaonan, Chen Zhuowei, Zhao He, Xu Shucai, Qu Keyong, Jin Shubin, Chen Siwei, Guo Dehua, Wang Zhongting, Zheng Rong, Guo Xiaochao, Gao Xuemei, Song Jiafeng, Chen Simin, Ma Shuai, Wu Haimei, Zheng Xiaohui, Wang Rui, Niu Jianwei, Lin Huicheng, Ge Meng, Wu Bo, Liu Dechun, Yin Jiwei, Liu Hongjuan, Chen Jian, Wei Bo, Qin Hua, Yu Xintong, Yuan Shuai, Xu Hongqi, Sun Guilei, Zhang Qingshan, Chu Junpeng, Tian Hao, Ren Ying. This document was first issued in 1981, revised for the first time in.1998, and this is the second revision. Adult head and face dimensions

1 Scope

This document gives the basic statistical values of head and face dimensions, head length and width, and morphological face length and width for adults (18 to 70 years old). Two-dimensional distribution, and regression equations of other head and face parameters and the main head and face parameters. This document applies to the design, production and selection of head and facial products for adults.

2 Normative references

The contents of the following documents constitute essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document. GB/T 5703-2023 Basic items of human body measurement for technical design

3 Terms and definitions

The terms and definitions defined in GB/T 5703-2023 and the following apply to this document. 3.1 glabela-vertex-cervical The length of the arc from the glabella through the vertex of the head to the cervical vertebrae. 3.2 The circumference is measured from the top of the head to the starting point, through the submental point. 3.3 Vertex-pupilheight The vertical distance from the vertex of the head to the inner corner of the eye. 3.4 Transversalarc The length of the arc from the tragus point on one side through the vertex of the head to the tragus point on the other side. 3.5 head height totalheadheight The vertical distance from the top of the head to the submental point. 3.6 When the head is positioned in the eye-ear plane, it is the vertical distance from the most forward protrusion of the nose tip to the back of the occipital point. 3.7 The vertical distance from the upper edge of the tragus cartilage, where the base of the helix transitions to the skin on the side of the skull, to the occipital point. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 2428-2024_English be delivered?

Answer: Upon your order, we will start to translate GB/T 2428-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 2428-2024_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 2428-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 2428-2024?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 2428-2024 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.