GB/T 24241-2009 English PDFUS$154.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 24241-2009: Direct reduced iron -- Determination of the tumble and abrasion indices of hot briquetted iron (HBI) Status: Valid
Basic dataStandard ID: GB/T 24241-2009 (GB/T24241-2009)Description (Translated English): Direct reduced iron -- Determination of the tumble and abrasion indices of hot briquetted iron (HBI) Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: D31 Classification of International Standard: 73.060.10 Word Count Estimation: 8,814 Date of Issue: 2009-07-15 Date of Implementation: 2010-04-01 Quoted Standard: GB/T 6003.1; GB/T 6003.2; GB/T 20565; ISO 10835 Adopted Standard: ISO 15967-2007, IDT Regulation (derived from): National Standard Approval Announcement 2009 No.9 (Total No.149) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard provides an evaluation of DRI impact resistance and abrasion resistance methods. This standard specifies the determination of HBI drum index and abrasion index. GB/T 24241-2009: Direct reduced iron -- Determination of the tumble and abrasion indices of hot briquetted iron (HBI)---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Direct reduced iron. Determination of the tumble and abrasion indices of hot briquetted iron (HBI) ICS 73.060.10 D31 National Standards of People's Republic of China GB/T 24241-2009/ISO 15967.2007 DRI Determination of hot briquette iron drum and wear index (ISO 15967.2007, IDT) Posted 2009-07-15 2010-04-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis standard is equivalent to international standards ISO 15967.2007 "DRI hot briquette iron drum and abrasion index determination" (English Version). For ease of use, this standard has been modified following editorial and non-technical difference of. --- "This International Standard" by "this standard"; "." --- With a decimal point instead of a comma as the decimal point, ""; --- Delete foreword international standards; --- References modify the corresponding national standards; --- Rearrange the picture number and location; --- According to the actual situation, an increase in 7.2 rubber door seal drum material; --- 8.2 will tumble index and abrasion index is calculated in units of g to kg; --- Chapter 9 test reports changed to Chapter 10, also made a non-technical content changes. Appendix A of this standard is a normative appendix. The standard proposed by China Iron and Steel Association. This standard by the National Standardization Technical Committee of the reduced iron ore and direct. This standard is drafted by. Baoshan Iron & Steel Co., Ltd. Participated in the drafting of this standard. Metallurgical Industry Information Standards Institute. The main drafters of this standard. Sun Liang, SOUTHERN in Li Fengyun at a peak, Fan Chun, Tian Huiling, Zhou Xing, Wang Han, Xu Qing. GB/T 24241-2009/ISO 15967.2007 DRI Determination of hot briquette iron drum and wear index Warning --- personnel should use this standard practice regular laboratory work. This standard does not point out all possible security asked question. Users have the responsibility to take appropriate safety and health practices and to ensure compliance with the conditions relevant national regulations.1 ScopeThis standard provides an evaluation of DRI impact resistance and abrasion resistance methods. This standard specifies the method for determination of the hot briquette iron (HBI) tumble index and abrasion index.2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 6003.1 woven wire mesh test sieve (GB/T 6003.1-1997, eqvISO 3310-1.1990) GB/T 6003.2 Test sieves of perforated metal plate (GB/T 6003.2-1997, eqvISO 3310-2.1990) GB/T 20565 term iron ore and direct reduced iron (GB/T 20565-2006, ISO 11323.2002, IDT) ISO 10835 DRI and hot briquette iron sampling and sample preparation methods3 Terms and DefinitionsThe standards adopted GB/T 20565 in the terms and definitions. Principle 4 The test sample in a circular drum, to 25r/min rotation speed of 200 rpm. Test samples with 6.30mm and after the drum test Square hole sieve 500μm were sieved. After the drum index of particle size greater than 6.30mm drum test sample mass fraction of said wear means With the number of particle size less than 500μm drum after the test sample mass fraction representation. 5 sampling, sample preparation and test sample preparation 5.1 Sampling and sample preparation Sampling and sample preparation is carried out in accordance with ISO 10835. Dried samples requires at least 70kg. Samples at 105 ℃ ± 5 ℃ oven drying to constant weight, and then cooled to room temperature. Note. If two consecutive dry sample varies no more than 0.05% by mass of the original sample is considered state of the sample constant weight is reached. Test sieve 40mm manual screening of samples discarded less than 40mm of section. 5.2 Preparation of test sample The test sample paved rectangle layer on a smooth flat. Test samples were randomly taken from the sample, to be prepared at least four test samples of about 15kg, followed by the test sample into the four containers. The test sample was weighed, testing whether it satisfies the requirements of 15kg ± 0.5kg. If the test sample does not reach the quality of 15kg ± 0.5kg Requirements, should come up with the remaining test sample piece of iron added to the test sample, or to come up with one piece of iron from the test sample and discard until trial Test sample quality to meet the requirements. Record of each test sample quality. GB/T 24241-2009/ISO 15967.2007 ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 24241-2009_English be delivered?Answer: Upon your order, we will start to translate GB/T 24241-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 24241-2009_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 24241-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
