GB/T 24133-2009 English PDFUS$154.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 24133-2009: Rubber-or plastics-coated fabrics -- Standard atmospheres for conditioning and testing Status: Valid
Basic dataStandard ID: GB/T 24133-2009 (GB/T24133-2009)Description (Translated English): Rubber-or plastics-coated fabrics -- Standard atmospheres for conditioning and testing Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: G42 Classification of International Standard: 59.080.40 Word Count Estimation: 8,811 Date of Issue: 2009-06-15 Date of Implementation: 2010-02-01 Quoted Standard: ISO 554-1976 Adopted Standard: ISO 2231-1989, IDT Regulation (derived from): National Standard Approval Announcement 2009 No.8 (Total No.148) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the rubber or plastic coated fabrics regulation requirements and regulation methods. GB/T 24133-2009: Rubber-or plastics-coated fabrics -- Standard atmospheres for conditioning and testing---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Rubber-or plastics-coated fabrics.Standard atmospheres for conditioning and testing ICS 59.080.40 G42 National Standards of People's Republic of China GB/T 24133-2009/ISO 2231. 1989 Rubber or plastic coated fabrics Environmental regulation and testing standards (ISO 2231. 1989, IDT) Posted 2009-06-15 2010-02-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis standard is identical with ISO 2231. 1989 "Rubber or plastic coated fabrics - Standard conditioning and testing environment" (in English). This standard is equivalent translation ISO 2231. 1989. For ease of use, this standard made the following editorial changes. a) "this International Standard" be replaced by "this standard"; b) use a decimal point instead of a decimal comma ",". ","; c) Remove the preface to international standards. The standard proposed by China Petroleum and Chemical Industry Association. This standard by the National Rubber and rubber products coated products Standardization Technical Committee Technical Committee (SAC/TC35/SC10) Centralized. This standard was drafted. Shanghai Institute of Rubber Products. The main drafters of this standard. Bianzheng Jun, Yang Chenyun. GB/T 24133-2009/ISO 2231. 1989 Rubber or plastic coated fabrics Environmental regulation and testing standards1 ScopeThis standard specifies the rubber or plastic coated fabric conditioning requirements and adjustment method.2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. ISO 554. 1976 regulation and/or testing standard atmospheric Specification3 Terms and DefinitionsThe following terms and definitions apply to this standard. 3.1 Is a theoretical environment. If the relevant conversion factor is known, then under different environmental conditions measured characteristic value with this theoretical environment related. Note. Standard reference makes provision for the environment than in ISO 554. 3.2 Actual environmental tests. 3.3 Environmental characteristics of coated fabrics, tested and exposed to the environment of the time. 3.4 Coated fabrics to achieve equilibrium conditions in the standard state environmental regulation and testing of. 3.5 After the coated fabric is exposed to the flow of air, the quality of balance when no significant change. 4 pre-regulator When the woven base fabric is a strong hygroscopic material, or a test method requires high precision, the sample should be placed no more than 10% relative humidity, temperature Adjusted for the environment 60 ℃ ~ 70 ℃, the equilibrium the sample (see 3.5). NOTE. 65% relative humidity, air temperature is 20 ℃, and under constant pressure is heated to 60 ℃ ~ 70 ℃, relative humidity of about 5%, then high humidity It will cause some changes in the coating layer. GB/T 24133-2009/ISO 2231. 1989 ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 24133-2009_English be delivered?Answer: Upon your order, we will start to translate GB/T 24133-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 24133-2009_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 24133-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
