GB/T 24104-2009 English PDF

US$839.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 24104-2009: Method of model and nomenclature for instrument for geotechnical engineering
Status: Obsolete

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 24104-2009	839	Add to Cart	4 days	Method of model and nomenclature for instrument for geotechnical engineering	Obsolete

Similar standards

GB 55018   GB/T 17742   DB/T 10   GB/T 24106   GB/T 24107.1   GB/T 24105   

Basic data

Standard ID: GB/T 24104-2009 (GB/T24104-2009)
Description (Translated English): Method of model and nomenclature for instrument for geotechnical engineering
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: P10
Classification of International Standard: 67.060
Word Count Estimation: 21,272
Date of Issue: 2009-06-12
Date of Implementation: 2009-12-01
Quoted Standard: GB/T 15406-2007; GB/T 21029-2007; GB/T 50279-1998; GB/T 24106-2009
Regulation (derived from): National Standard Approval Announcement 2009 No.8 (Total No.148)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the principles and methods of preparation of geotechnical instrumentation model named. This standard applies to all types of geotechnical instrumentation product model named preparation and management.

GB/T 24104-2009: Method of model and nomenclature for instrument for geotechnical engineering

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Method of model and nomenclature for instrument for geotechnical engineering ICS 67.060 P10 National Standards of People's Republic of China Geotechnical engineering instrument type designation Posted 2009-06-12 2009-12-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Introduction Ⅲ 1 Scope 1 2 Normative references 1 3 Terms and definitions 4 Category 1 5 Type 1 5.1 Composition 1 5.2 Composition sequence 1 5.3 Principle 2 6 3 Naming 6.1 abbreviated Pinyin alphabet selection rules 3 6.2 Principle 3 6.3 3 Composition name 6.4 name of the element default rule 3 6.5 Other 3 6.6 Example 3 Appendix A (normative) soil test equipment category, group, column do not code 4 A. 1 Category 4 A. 2 Group 4 A. 2.1 density tester class (M) 4 A. 2.2 Humidity tester class (S) 4 A. 2.3 Particle Analyzer class (K) 4 A. 2.4 penetration tester class (H) 5 A. 2.5 compression tester class (Y) 5 A. 2.6 Strength Tester Class (I) 5 A. 3 Do 5 Appendix B (normative) dam monitoring (observation) instrument category, group, column 6 do not code B. 1 Category 6 B. 2 Group 6 B. 2.1 Deformation monitoring (observation) equipment category (B) 6 B. 2.2 stress/strain monitoring (observation) instrument class (Y) 6 B. 2.3 seepage monitoring (observation) equipment category (L) 7 B. 2.4 Temperature monitoring (observation) equipment category (W) 7 B. 2.5 dynamic monitoring (observation) instrument class (D) 7 B. 2.6 When the meter Class (J) 7 B. 2.7 hub box type (X) 8 B. 3 Do 8 B. 3.1 Deformation monitoring (observation) equipment category (B) 8 B. 3.2 stress/strain monitoring (observation) instrument class (Y) 10 B. 3.3 seepage monitoring (observation) equipment category (L) 11 B. 3.4 Monitoring temperature (observation) equipment category (W) 12 B. 3.5 dynamic monitoring (observation) instrument class (D) 12 B. 3.6 When the meter Class (J) 12 Annex C (normative) rock experimental (test) instrument category, group, do not code column 13 C. 1 Category 13 C. 2 Group 13 C. 2.1 Preparation of the rock sample processing device class (Y) 13 C. 2.2 universal test equipment class (T) 13 C. 2.3 class rock testing equipment (S) 14 C. 2.4 Test equipment category Rock (I) 14 C. 2.5 situ monitoring instruments class (Y) 14 C. 2.6 mechanics model test equipment category (M) 14 C. 2.7 quickly determine rock quality equipment category (P) 15 C. 2.8 wave test equipment category (B) 15 C. 2.9 When the meter Class (J) 15 C. 3 Do 15 Annex D (informative) Type designation example shows 16 D. 1 Corporate Identity 16 D. 2 Example 16

Foreword

The standard in the product classification and GB/T 21029-2007 "geotechnical engineering Instrument Series spectrum" basic coherence. The Standard Appendix A, Appendix B, Appendix C is normative appendix, Appendix D is an informative annex. This standard is proposed and administered by the People's Republic of China Ministry of Water Resources. This standard is mainly drafted by. MWR hydrological instruments and geotechnical engineering Instrument Quality Supervision and Testing Center, Changzhou Civil instrument has Limited, Ministry of Water Resources Hydrology Nanjing Hydraulic Research Institute of Automation. Participated in the drafting of this standard. the country's industrial production permit office hydrological instruments and geotechnical engineering Instrument Examination Department. The main drafters of this standard. Xu Haifeng, Xu Lu, Shengxu Jun, Jin Ling, Yang Yu, Wu Yi, Li Gang. Participate drafters of this standard. Yuanpu Sheng. Geotechnical engineering instrument type designation

1 Scope

This standard specifies the principles and methods of preparation of geotechnical engineering instrument model named. This standard applies to all types of geotechnical engineering equipment product development and management model named.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 15406-2007 geotechnical engineering instrument basic parameters and general technical conditions GB/T 21029-2007 geotechnical engineering Instrument Series spectrum GB/T 50279-1998 Standard for fundamental terms of geotechnical engineering GB/T 24106-2009 geotechnical engineering instrumentation terminology and symbols

3 Terms and Definitions

GB/T 50279-1998, terms and definitions GB/T 24106-2009 established applicable to this standard. Category 4 Geotechnical engineering instrument classification shall comply with GB/T 21029-2007 of.

5 Models

5.1 Composition Geotechnical engineering model of the instrument by the enterprise identification number, dot character, category number, group number, column alias, part of the separator, and the like typed numbers. a) Corporate Identity Number. identifies the product production unit (such as a corporate trademark or letter code); b) the dot operator. use under dot character;. "" c) category number. by field of application of the instrument and use in feature measurement division; d) group number. press the instrument measurement object, working principle is divided; e) column alias. Press the instrument works, the main specifications of features, recording or data acquisition, processing mode split; f) separator. "-"; g) typed number. use the instrument at a substantially constant, the number of design technology updates. 5.2 Composition sequence Type Content Order geotechnical engineering equipment by 5.1 a), b), c), d), e), f), g) sequentially arranged in the order shown in Figure 1. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 24104-2009_English be delivered?

Answer: Upon your order, we will start to translate GB/T 24104-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 24104-2009_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 24104-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.