GB/T 2386-2014 English PDFUS$299.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 2386-2014: Dyestuffs and intermediate of dyes -- Determination of moisture content Status: Valid GB/T 2386: Historical versions
Basic dataStandard ID: GB/T 2386-2014 (GB/T2386-2014)Description (Translated English): Dyestuffs and intermediate of dyes -- Determination of moisture content Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: G55 Classification of International Standard: 71.100.01; 87.060.10 Word Count Estimation: 13,137 Date of Issue: 7/8/2014 Date of Implementation: 12/1/2014 Older Standard (superseded by this standard): GB/T 2386-2006 Quoted Standard: GB/T 2374-2007; GB/T 8170-2008 Regulation (derived from): 2014 National Standards Bulletin No. 18 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the method for the determination of moisture dyes and dye intermediates. This standard applies to all types of dyes, dye intermediates determination of moisture, which ? Karl Fischer method and Karl Fischer ? Improvement Act applie GB/T 2386-2014: Dyestuffs and intermediate of dyes -- Determination of moisture content---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Dyestuffs and intermediate of dyes. Determination of moisture content ICS 71.100.01; 87.060.10 G55 National Standards of People's Republic of China Replacing GB/T 2386-2006 Determination of dyes and dye intermediates moisture Issued on. 2014-07-08 2014-12-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard replaces GB/T 2386-2006 "dyes and dye intermediates Determination of moisture", compared with the GB/T 2386-2006, the main To technical changes are as follows. --- Modify the results of the maintenance accuracy (see 31, 32, 33, 2006 edition of 3.1,3.2,3.3...); --- Increased fast drying method (see 3.2.2); --- Modify the contents of the test report (see Chapter 4, Chapter 4 of the 2006 edition). The standard proposed by China Petroleum and Chemical Industry Association. This standard by the National Standardization Technical Committee Dye (SAC/TC134) centralized. This standard was drafted. Wang Jinhua double-Chemical Co., Ltd., Shenyang Chemical Research Institute Co., Ltd., the State Quality Supervision and Inspection Center dye. The main drafters of this standard. Ma Junqing, Xu Jiancheng, Zhang Guodong, Yang Zhenmei. This standard replaces the standards previously issued as follows. --- GB 2386-1980, GB/T 2386-2003, GB/T 2386-2006; --- GB/T 13753-1992. Determination of dyes and dye intermediates moisture1 ScopeThis standard specifies the method for the determination of moisture dyes and dye intermediates. This standard applies to all types of dyes, dye intermediates determination of moisture, which Karl Fischer method and improved Karl Fischer method is suitable for dyeing Determination of trace moisture in materials and dye intermediates, but the main ingredient does not apply with Karl Fischer reagents and reaction produces water samples And capable of reducing the oxidation of iodine or iodide in water samples was measured.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. General conditions GB/T 2374-2007 Determination of dyes provisions GB/T 8170-2008 repair numerical representation about rules and limit values \u200b\u200band judgment Test Method 3 3.1 solvent extraction method 3.1.1 Reagents Reagents should meet the following requirements. a) Toluene. chemically pure. b) Xylene. chemically pure. 3.1.2 The instruments and equipment The equipment shall comply with GB/T 2374-2007 Chapter 4, the apparatus comprising. a) rack pan balance scales. a sense of not more than 0.1g. b) determination of moisture content, a structure shown in Figure 1. 3.1.3 measuring step In a clean, dry moisture measuring a distillation flask was placed dye Sample Test 20g ~ 50g (accurate to 0.1g), was added 100mL ~ 125mL of water saturated with toluene or xylene, after distillation bottle cap and a condenser connected with the scale, placed in a heating bath plus Hot, boiling toluene or xylene reflux, reflux speed control, the condensate per second rate of 2 to 5 drops dripping from the condenser end. when Scale cap not increase the volume of water, when the upper solution becomes transparent, the heating was stopped, cooled 30min, read from the scale of the water body cap Product; if the upper solution rendered turbid, it will accept the tube in warm water, clarified, and then cooled to room temperature readings; if condenser inner walls stained Droplets, can increase or flame voltage was increased, heating for several minutes, the droplets burst into the receptacle, and then cooled to room temperature readings. Still valid, the gold Genus wire or thin glass rod end with rubber or plastic head, the water droplets scraped into the condenser wall receptacle and then cooled to room temperature readings. Also do a parallel blank test. In a clean, dry distillation flask 100mL ~ 125mL of water saturated with toluene or xylene Benzene, and the other with a pipette 0.50mL distilled water, following the same process with the sample, read the last volume of the effluent from the cap scale. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 2386-2014_English be delivered?Answer: Upon your order, we will start to translate GB/T 2386-2014_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 2386-2014_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 2386-2014_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 2386-2014?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 2386-2014 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
