GB/T 23581-2025 English PDF

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 23581-2025	RFQ	ASK	3 days	Storage equipment for loose bulk materials - Safety specification	Valid
GB/T 23581-2009	154	Add to Cart	3 days	Storage equipment for loose bulk materials -- Safety code	Valid

Basic data

Standard ID: GB/T 23581-2025 (GB/T23581-2025)
Description (Translated English): Storage equipment for loose bulk materials - Safety specification
Sector / Industry: National Standard (Recommended)
Date of Implementation: 2026-03-01
Older Standard (superseded by this standard): GB/T 23581-2009

GB/T 23581-2009: Storage equipment for loose bulk materials -- Safety code

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Storage equipment for loose bulk materials. Safety code ICS 53.080 J83 National Standards of People's Republic of China GB/T 23581-2009/ISO 8456. 1985 Bulk materials storage facility with safety regulations (ISO 8456. 1985, IDT) Posted 2009-04-13 2010-01-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard is equivalent to using ISO 8456. 1985 "Safety Specification for bulk materials storage facilities" (in English). This standard is equivalent translation ISO 8456. 1985. For ease of use, this standard made the following editorial changes. --- "This International Standard" be replaced by "this standard"; --- Deleted international standards foreword; --- The ISO 8456. 1985 in Chapter 1 and Chapter 2, into the "Chapter 1" and; --- Normative references cited in the adoption of international standards is equivalent to the national standard, and re-adjust the standard order. The standard proposed by China Machinery Industry Federation. This standard by the National Standardization Technical Committee Continuous mechanical handling (SAC/TC331) centralized. This standard was drafted. Beijing Materials Handling Research Institute. The main drafters of this standard. Liu Tao. GB/T 23581-2009/ISO 8456. 1985 Bulk materials storage facility with safety regulations

1 Scope

This standard specifies the hoppers, silos, silos and gates and other bulk materials with special storage facility safety rules, the regulation is ISO 1819 General safety given the supplement. This standard specifies the safety rules do not consider the use of the original equipment. The safety rules defining vendor responsibility for continuous handling machinery itself, the structure does not include affiliated member, unless these structures built Storing the device.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 23580 Continuous mechanical handling equipment safety regulations specific rules (GB/T 23580-2009, ISO 7149. 1982, IDT) ISO 1819 Continuous mechanical handling equipment - General safety regulations

3 General

With bulk materials storage facility (such as hoppers, silos, silos and gates and other equipment) shall comply with the construction and use of. a) statutory and regional general safety requirements; b) General safety ISO 1819 prescribed; Special safety rules c) GB/T 23580 stipulated; d) pressure or vacuum container products are not available under the rules of the fire source environment 1); e) special safety rules as specified in Chapter 4. 1) access to relevant national regulations.

4 special safety rules

4.1 construction process (design and manufacturing) 4.1.1 hoppers and silos 4.1.1.1 Overview 4.1.1.1.1 device structure should be able to withstand the load under normal operating conditions (weight, storage of materials, the structure on which the subsidiary and the support provided Equipment, as well as short-term work overload), both parties to address climate and geological conditions agreed should follow static and dynamic design specifications. Stability requirements under all loads should also be clear in the contract. 4.1.1.1.2 storage materials such as the use of vehicles transported, the supporting part of the device with a minimum distance on both sides of the outer edge of the vehicle shall comply with the following Claim. a) in the running direction of the vehicle is less than 300mm, fixed isolation barrier (piles, pillars, columns, building corners, etc.), its most Small distance of 500mm; b) For continuous fixed obstacles (walls, warehouses, docks, buildings, etc.) under the conditions and 300mm and above the pile and pillar, which The minimum distance of 700mm. At work or outside work area may not necessarily follow the minimum distance specified above. GB/T 23581-2009/ISO 8456. 1985 ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 23581-2025_English be delivered?

Answer: Upon your order, we will start to translate GB/T 23581-2025_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 23581-2025_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 23581-2025_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 23581-2025?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 23581-2025 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.