GB/T 23516-2009 English PDFUS$189.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 23516-2009: Special wires of precious metals and their alloys Status: Valid
Basic dataStandard ID: GB/T 23516-2009 (GB/T23516-2009)Description (Translated English): Special wires of precious metals and their alloys Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: H68 Classification of International Standard: 77.120.99 Word Count Estimation: 8,898 Date of Issue: 2009-04-08 Date of Implementation: 2010-02-01 Regulation (derived from): National Standard Approval Announcement 2009 No.4 (Total No.144) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the precious metals and their alloys shaped wire timber requirements, test methods, inspection rules and signs, packaging, transport, storage and purchase order (or contract) content. This standard applies to relays and other electrical micro- micro-motors and other precious metals and their alloys shaped wire. GB/T 23516-2009: Special wires of precious metals and their alloys---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Special wires of precious metals and their alloys ICS 77.120.99 H68 National Standards of People's Republic of China Precious metals and their alloys Shaped wire Posted 2009-04-08 2010-02-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThe standard proposed by China Nonferrous Metals Industry Association. This standard Nonferrous Metals by the National Standardization Technical Committee. This standard is drafted by. Your research Platinum Ltd., China Nonferrous Metals Industry Standards and Metrology Institute for Quality. Participated in the drafting of this standard. Yes REVIEW billion of the new Materials Co., Ltd.. The main drafters of this standard. Wang Jian, Zhou Shiping, Zhang Xiaohui, Hedong Jiang, Lu Shaoping, Wangguang Qing, Yang Fu Tao, Zhu Wuxun, He Yi, Wang Yongming. Precious metals and their alloys Shaped wire1 ScopeThis standard specifies the precious metals and their alloys shaped wire requirements, test methods, inspection rules and signs, packaging, transportation, storage and ordering Single (or contract) content. This standard applies to other electrical micro-relay and micro-motors and other precious metals and their alloys Shaped wire.2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 15072 (all parts), chemical analysis of precious metal alloys GB/T 15077 precious metals and their alloys geometry measurement methods GJB950 trace element analysis of precious metals and their alloys3 Terms and DefinitionsThe following terms and definitions apply to this standard. 3.1 Precious metals and their alloys wire of non-circular cross-section. 3.2 The upper circular surface or plane precious metals and their alloys Shaped Face wire.4 Requirements4.1 Product Classification and Labeling 4.1.1 Categories Product cross-sectional shape is trapezoidal, rectangular, square, triangular, circular arc or a fan and a plurality of combinations, Figure 1 shows a typical five The cross-sectional shape. 4.1.2 The method of marking and labeling examples SW Shaped wire abbreviation (specialwires) □□□ □□□ The cross-sectional base width B (Unit. mm) □□□ Face arc cross-section the radius of curvature R (unit. mm) XX grades Note. The size of the representation, the size of each of the last two decimal places. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 23516-2009_English be delivered?Answer: Upon your order, we will start to translate GB/T 23516-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 23516-2009_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 23516-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
