GB/T 23467-2009 English PDFUS$369.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 23467-2009: Standard test method for evaluation of flame resistant clothing for protection against flash fire simulations using an instrumented manikin Status: Valid
Basic dataStandard ID: GB/T 23467-2009 (GB/T23467-2009)Description (Translated English): Standard test method for evaluation of flame resistant clothing for protection against flash fire simulations using an instrumented manikin Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: F79 Classification of International Standard: 13.340.10 Word Count Estimation: 16,115 Date of Issue: 2009-04-01 Date of Implementation: 2009-12-01 Adopted Standard: ASTM F1930-2000, MOD Regulation (derived from): Announcement of Newly Approved National Standards No. 4, 2009 (No. 144 overall) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the heat flux distribution and duration of the flame can be controlled flashover simulation environment, the characterization of flame retardant protective clothing quantitative measurements and subjective methods of observation. This standard applies to protective clothing flame retardant properties of the test and evaluation, can also be used to predict the extent of human tissue burns and burns of the total area. GB/T 23467-2009: Standard test method for evaluation of flame resistant clothing for protection against flash fire simulations using an instrumented manikin---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Standard test method for evaluation of flame resistant clothing for protection against flash fire simulations using an instrumented manikin ICS 13.340.10 F79 National Standards of People's Republic of China Retardant clothing evaluate performance under the conditions of flashover dummies Test Method Posted 2009-04-01 2009-12-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis revised standard adopts the American Society for Testing and Materials standard (ASTMF1930.2000) "dummies assessment under flashover conditions retardant clothing Test Method for Performance "(in English). This standard ASTMF1930. different from 2000 in that. a) of Chapter 1 made editorial modifications increase the article note; b) amend the references in Chapter 2; c) the first 5 chapters attributed to the introduction; d) amend Chapter 5 dummy recommended size requirements; e) amend Chapter 5 Distribution dummy surface of the sensor; f) Appendix A made editorial modifications. Appendix A of this standard is a normative appendix. This standard was proposed by the State Administration of Work Safety. This standard is under the jurisdiction of the National Technical Committee of Standardization for Personal Protective Equipment. This standard was drafted. Quartermaster Equipment Institute of General Logistics Department of PLA Medical Library. The main drafters of this standard. Yuhong Chen, Jiang Yi, Hao Junqin, Ni Jiyun, Li Chenming.IntroductionThis test method provides a measurement instrument of the dummy and compare different materials, different clothing and flame-retardant protective clothing matching properties method. However, this test method can not be used as a quality assurance test, it does not involve impact dummy body posture and movement of the test results. Thermal Protective Performance Measurement clothing more complex, depending on the test results using the instruments and techniques. Established in the field that contains all Test methods may occur accident state is unrealistic. Difference test methods can lead to large differences in the test results. Such as If the description given in this test method has obvious bias, we need to heat transfer theory and technical knowledge and practices related test was evaluated price. Standardized test method can reduce but not eliminate the errors caused by the above-mentioned technical knowledge. Test results should report all difference. Retardant clothing evaluate performance under the conditions of flashover dummies Test Method1 ScopeThis standard specifies the lower heat flux, distribution and duration of the flame can be controlled flashover simulation environment, characterization protective clothing flame retardant Quantitative measurements and subjective methods of observation. This standard applies to testing and evaluation of protective clothing flame retardant properties, it can also be used to predict the degree of body tissue burns and total area burned. NOTE. This standard applies to measure and describe the material, product or composition under controlled conditions in response to heat and flame, and it should not be used to describe and evaluate the material Material, product or composition in the actual scene of the fire hazards and possibilities. But with the results of this standard test can be used as a fire or ignition hazard assessment Based on a risk assessment, the assessment of the relevant factors to consider in particular the use of fire hazard or fire risk assessment.2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 1335.1 and type of clothes man GB/T 3291 textile material properties and test - GB/T 8629 Textiles - Domestic washing and drying test procedures GB/T 13640 Type of protective clothing3 Terms and DefinitionsGB/T 3291, GB/T 13640 and identified by the following terms and definitions apply to this standard. 3.1 Human tissue at different depths thermal damage. NOTE. When human tissue is heated and persist for some time, the tissue will burn at high temperatures. Burns were divided into first-, second- and third-degree burn three Level injury; burns depends on the temperature level and the length of duration. 3.2 In the clothing flashover test, controllable heat flux ejected from the burner flame in the spatial distribution of the dummy surface. 3.3 Has adult size, surface laid at least 100 heat sensors used in clothing flashover test dummies. 3.4 Test measurements of heat transferred to the surface of a dummy instrument (device). 3.5 For the detection of a single piece of clothing or an attribute set of protective clothing to prevent burns to produce heat transfer properties. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 23467-2009_English be delivered?Answer: Upon your order, we will start to translate GB/T 23467-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 23467-2009_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 23467-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
