GB/T 23443-2024 English PDFUS$609.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 23443-2024: Aluminium panels for building decoration Status: Valid GB/T 23443: Historical versions
Basic dataStandard ID: GB/T 23443-2024 (GB/T23443-2024)Description (Translated English): Aluminium panels for building decoration Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: Q73 Classification of International Standard: 91.060 Word Count Estimation: 30,399 Date of Issue: 2024-10-26 Date of Implementation: 2025-05-01 Older Standard (superseded by this standard): GB/T 23443-2009 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 23443-2024: Aluminium panels for building decoration---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT23443-2024ICS 91.060 CCSQ73 National Standard of the People's Republic of China Replaces GB/T 23443-2009 Aluminum veneer for architectural decoration Released on October 26, 2024 Implementation on May 1, 2025 State Administration for Market Regulation The National Standardization Administration issued PrefaceThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting. This document replaces GB/T 23443-2009 "Aluminum veneer for architectural decoration". Compared with GB/T 23443-2009, except for the structural adjustment and In addition to editorial changes, the main technical changes are as follows. --- Changed the scope (see Chapter 1, Chapter 1 of the.2009 edition); --- Deleted the terms acrylic coating and open exposure (see 3.4 and 3.12 of the.2009 edition); --- Changed the definition of the term fluorocarbon coating (see 3.2, 3.2 of the.2009 edition); --- Added classification requirements according to natural climate weathering resistance (see 4.1.4); --- Changed the classification requirements according to the decorative surface material and processing technology (see 4.1.1, 4.1.2, 4.1.1, 4.1.2 of the.2009 edition); --- Changed the chemical composition and mechanical properties requirements of aluminum substrates (see 5.1.1, 5.1.1 of the.2009 edition); --- Changed the requirements for fluorocarbon coatings (see 5.2, 5.2 of the.2009 edition); --- Added aluminum reinforcement (see 5.3); --- Changed the appearance quality requirements and added the coating index requirements (see 6.1, 6.1 of the.2009 edition); --- Changed the decorative surface thickness requirements (see 6.3, 6.3 of the.2009 edition); --- Changed the performance requirements for decorative surface layers and added requirements for pollution resistance (see 6.4, 6.4 of the.2009 edition); --- Changed the weather resistance requirements (see 6.6, 6.6 of the.2009 edition); --- Added the pollution resistance test method (see 7.11); --- Changed the weathering test method (see 7.13.1, 7.13.4, 7.12.1, 7.12.4 of the.2009 edition); --- Deleted the natural climate exposure test method for aluminum veneer (see Appendix C of the.2009 edition). Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document is proposed by China Building Materials Federation. This document is under the jurisdiction of the National Technical Committee for Standardization of Lightweight and Decorative Building Materials (SAC/TC195). This document was drafted by. China National Testing and Inspection Holding Group Co., Ltd., Dong'e Lantian Qise Building Materials Co., Ltd., Shanghai Jixiangke Technology (Group) Co., Ltd., Qianghuang New Materials Co., Ltd., Fangda New Materials (Jiangxi) Co., Ltd., Jinzhu Aluminum (Tianjin) Co., Ltd., Jixiang Group Co., Ltd., Jixiang Quan Holding Group Co., Ltd., PPG Paint (Tianjin) Co., Ltd., Jinzhu Taiyang Decoration Co., Ltd., Yatai Industrial Group Co., Ltd., Akzo Nobel (China) Investment Co., Ltd., Daikin Fluorochemical (China) Co., Ltd., Boli Technology (Jiaxing) Co., Ltd., Wanbo New Materials Technology (Nantong) Co., Ltd., Jinsheng Aluminum (Langfang) Co., Ltd., Shandong Caishan Aluminum Co., Ltd. Company, Hongdao Industrial (Yingde) Co., Ltd., Guangdong Fanlu Far East Aluminum Co., Ltd., Aijiexu Chemical Technology (Shanghai) Co., Ltd., Guangzhou Jin Ba Building Materials Co., Ltd., Tianjin Jinbang Shengtai Building Materials Co., Ltd., Chongqing Hengya Aluminum Co., Ltd., Hebei Xinqianrui New Building Materials Co., Ltd. Company, DuPont (China) R&D Management Co., Ltd., Guangdong Huajiang Powder Technology Co., Ltd., Armstrong World Industries (China) Co., Ltd., Shanghai Jinlitai Chemical Co., Ltd., Henan Xintai Aluminum Co., Ltd., Qingdao Zhongfu Fluorocarbon Materials Co., Ltd., Mingchuang (Jiangsu) Curtain Wall New Materials Co., Ltd., Jiangsu Fengshun New Materials Technology Co., Ltd., Shandong Yatai New Materials Technology Co., Ltd., Qianghui New Building Materials Co., Ltd. Company, Dehui New Materials Technology Nantong Co., Ltd., Changzhou Baimei Metal Technology Co., Ltd., Guangdong Huatushi Building Materials Industry Co., Ltd., Zhaofa New Materials (Shenzhen) Co., Ltd., Jiangsu Haideman New Materials Co., Ltd., Guangdong Zhuneng Industrial Development Co., Ltd., Jiangsu Zhonghong Aluminum Co., Ltd. Co., Ltd., Guangzhou Shanma Building Materials Co., Ltd., Shanghai Alukao Decoration Materials Co., Ltd., Saxony Industry (Jiaxing) Co., Ltd., Jiangsu Success Materials Technology Co., Ltd., Chongqing Xinxia Aluminum (Group) Co., Ltd., Foshan Badis New Building Materials Co., Ltd., Shandong Jinghong Intelligent Technology Co., Ltd. The main drafters of this document are. Liu Yujun, Jiang Quan, Wu Shuai, Liu Tingting, Yin Qiang, Wang Xiaodong, Liu Shunli, Sun Feilong, Ding Xudong, Bai Yuefu, Yang Yangxian, Zhu Qiuxing, Zhu Yike, Li Biao, Chen Fuwen, Ni Chengpeng, Gong Wenjuan, Qi Chengwei, Zhu Xiaohui, Xia Fanwu, Xie Shuguang, Chen Bin, Zhang Kunzhao, Wang Weibin, Wang Shuzhong, Xi Junlong, Li Jingwei, Wu Zujun, Cheng Huicong, Liu Yuan, Wei Yufu, Zhao Zhanchao, Song Zhaobin, Huang Bo, Xie Zhenwei, Liu Jindong, Liu Decheng, Tang Jianrong, Weng Xiaochun, Yang Guang, Su Yipeng, Li Xiang, Feng Xiaoniu, Zhang Xinyan, Li Xing, Shao Hongming, Zhou Guoqing, Long Xisheng, Li Ge, Wang Xiao, He Lei and Wang Guohua. This document was first published in.2009 and this is the first revision. Aluminum veneer for architectural decoration1 ScopeThis document specifies the classification, code and marking, raw materials, requirements, test methods, inspection rules, marking, packaging, etc. of aluminum veneer for architectural decoration. Packaging, transportation, storage and accompanying documents. This document applies to aluminum veneers used for interior and exterior decoration of buildings.2 Normative referencesThe contents of the following documents constitute the essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document. GB/T 191 Pictorial markings for packaging, storage and transportation GB/T 1732 Determination of impact resistance of paint films GB/T 1740 Determination of resistance to moisture and heat of paint films GB/T 1766 Rating method for ageing of paints and varnishes GB/T 2480 Ordinary abrasive silicon carbide GB/T 3190 Chemical composition of wrought aluminum and aluminum alloys GB/T 3880.1 Aluminium and aluminium alloy plates and strips for general industrial use Part 1.General requirements GB/T 3880.3 Aluminium and aluminium alloy plates and strips for general industrial use Part 3.Dimensional deviations GB/T 4957 Measurement of coating thickness of non-conductive coatings on non-magnetic base metals - Eddy current method GB/T 6388 Shipping and Receiving Marks for Transport Packages GB/T 6461 Rating of metal and other inorganic coatings on metal substrates after corrosion testing of test specimens and test pieces GB/T 6739 Paints and varnishes - Determination of film hardness by pencil method GB/T 8753.1 Evaluation method for sealing quality of anodic oxide films on aluminium and aluminium alloys Part 1.Acid etching weight loss method GB/T 9286 Paints and varnishes cross-cut test GB/T 9754 Paints and varnishes - Determination of specular gloss at 20°, 60° and 85° of paint films without metallic pigments GB/T 9761 Paints and varnishes Visual colour comparison of paints GB/T 9780 Test method for stain resistance of architectural coatings GB/T 10125 Artificial atmosphere corrosion test Salt spray test GB/T 11186.2 Measurement of paint film color Part 2.Color measurement GB/T 11186.3 Measurement of paint film color Part 3.Calculation of color difference GB/T 13448-2019 Test methods for color coated steel sheets and strips GB/T 16259-2008 Test method for accelerated aging of building materials by artificial climate GB/T 16474 Designation method for wrought aluminum and aluminum alloys GB/T 30794 Determination of polyvinylidene fluoride (PVDF) content in hot-melt fluororesin coatings (dry films) - Melting temperature drop method JC/T 479 Quicklime for Building JC/T 2229 Test method for atmospheric exposure of metals and metal composites used in construction ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 23443-2024_English be delivered?Answer: Upon your order, we will start to translate GB/T 23443-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 23443-2024_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 23443-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 23443-2024?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 23443-2024 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
