GB/T 23426-2009 English PDFUS$234.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 23426-2009: Ships and marine technology -- Small weathertight steel hatches Status: Valid
Basic dataStandard ID: GB/T 23426-2009 (GB/T23426-2009)Description (Translated English): Ships and marine technology -- Small weathertight steel hatches Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: U26 Classification of International Standard: 47.020.10 Word Count Estimation: 12,174 Date of Issue: 2009-03-23 Date of Implementation: 2009-11-01 Adopted Standard: ISO 5778-1998, IDT Regulation (derived from): National Standard Approval Announcement 2009 No.4 (Total No.144) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the Small weathertight steel hatches for boat cover (hereinafter referred to as the hatch cover) the main dimensions, number of locations and accessories, materials and manufacturing quality to ensure interchangeability of the hatch. The remaining dimensions agreed by the manufacturer. This standard applies to the storage compartments and dry cargo for loading operation and out of the hatch. This standard does not apply to any fluid compartment as the entrance hatch, does not apply to the mouth as the escape hatch. This standard specifies the hatch cover usually meet the requirements of the International Convention on Load Lines, 1966 (LLC66) 's. And should consider the possibility of the hatch cover position 1 and 2 apply in, if necessary, to deal with the hatch cover is reinforced. GB/T 23426-2009: Ships and marine technology -- Small weathertight steel hatches---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Ships and marine technology. Small weathertight steel hatches ICS 47.020.10 U26 National Standards of People's Republic of China GB/T 23426-2009/ISO 5778.1998 Ships and marine technology Small weathertight steel hatches (ISO 5778.1998, IDT) Posted 2009-03-23 2009-11-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis standard is equivalent to using ISO 5778.1998 "Ships and marine technology - Small weathertight steel hatches" (in English). This standard made the following editorial changes. --- "This International Standard" be replaced by "this standard"; --- According to Chinese customs to international standards to apply to the presentation of a standard formulation; "." --- With a decimal point instead of a comma as the decimal point, ""; --- Delete international standards foreword. The standard proposed by China State Shipbuilding Corporation. This standard by the National Standardization Technical Committee loaded ship outfitting. This standard was drafted. Jiangnan Shipyard (Group) Co., Ltd. The main drafters of this standard. Lin Yu. GB/T 23426-2009/ISO 5778.1998 Ships and marine technology Small weathertight steel hatches1 ScopeThis standard specifies the number of the ship's main dimensions for Small weathertight steel hatches (hereinafter referred to as hatches), position and accessories The amount of materials and manufacturing quality, to ensure that the hatch interchangeability. Other dimensions agreed by the manufacturer. This standard applies to storage compartments and dry cargo for loading operation and out of the hatch. This standard does not apply to any liquid Cabin entrance hatch, not suitable for use as the emergency exit hatch. This standard specifies the hatch cover is generally in line with the requirements of the International Convention on Load Lines 1966 (LLC66) of. And should consider the hatch cover in place The possibility of setting and location 2 applies, if necessary, to deal with hatch cover is reinforced. Note. Users of this standard should be noted that, in compliance with this standard should also comply with the relevant regulatory requirements and may be applied to relate to a particular ship, rule.2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. ISO 262 ISO general purpose metric threaded screws, bolts and nuts of size selection 1966 International Convention on Load Lines (ILLC)3 main dimensions3.1 nominal size Hatch nominal size is the size of the inner wall around the portion between the board, see Figure 1 and Table 1. Millimeters 1 --- hatch seal.1 Nominal size LegendGB/T 23426-2009/ISO 5778.1998 ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 23426-2009_English be delivered?Answer: Upon your order, we will start to translate GB/T 23426-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 23426-2009_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 23426-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
