GB/T 23420-2024 English PDFUS$719.00 · In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 23420-2024: Aircraft lower deck container cargo loader Status: Valid GB/T 23420: Historical versions
Basic dataStandard ID: GB/T 23420-2024 (GB/T23420-2024)Description (Translated English): Aircraft lower deck container cargo loader Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: V56 Classification of International Standard: 49.100 Word Count Estimation: 36,363 Date of Issue: 2024-08-23 Date of Implementation: 2024-08-23 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 23420-2024: Aircraft lower deck container cargo loader---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.National Standard of the People's Republic of China ICS 49.100CCS V 56 Aircraft cargo hold container loader 2024-08-23 Release 2024-12-01 Implementation State Administration for Market Regulation The National Standardization Administration issued Replaces GB/T 23420-2009 Table of ContentsPreface Ⅲ 1 Scope...1 2 Normative references ...1 3 Terms and Definitions 2 4 Categories...2 5 Technical requirements 2 5.1 General requirements 2 5.2 Safety Requirements 3 5.3 Structural safety factor 5 5.4 Stability 6 5.5 Maneuverability 6 5.6 Operational Performance 6 5.7 External lighting and light signal devices 8 5.8 Reliability 8 5.9 Environmental adaptability 9 5.10 Environmental protection requirements 9 6 Test methods 9 6.1 Preparation before the test 9 6.2 General requirements 9 6.3 Safety Requirements 10 6.4 Structural safety factor ...10 6.5 Stability 11 6.6 Maneuverability 12 6.7 Operational Performance 13 6.8 Inspection of external lighting and light signal devices 14 6.9 Reliability 14 6.10 Environmental adaptability 15 6.11 Environmental protection requirements 15 7 Inspection Rules 16 7.1 Inspection classification 16 7.2 Factory Inspection 16 7.3 Qualification test 16 8 Labels, logos, instruction manuals...17 8.1 Signage ...17 8.2 Identification 17 8.3 User Manual 17 9 Packaging, transportation and storage...18 9.1 Packaging 18 9.2 Transportation 18 9.3 Storage 18 Appendix A (Informative) Efficiency of ULD container loaders 19 A.1 Definition of efficiency 19 A.2 Efficiency Goals 19 A.3 Roller design test 19 Appendix B (Normative) Safety requirements and test methods for electric container loaders 21 B.1 Safety Requirements 21 B.2 Test methods 25 Appendix C (Normative) Endurance Test Conditions 27 References ...28ForewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting is required. This document replaces GB/T 23420-2009 "Functional requirements for loaders of containers and pallets in the lower deck of wide-body aircraft" and is compatible with GB/T 23420- Compared with.2009, in addition to structural adjustments and editorial changes, the main technical changes are as follows. a) The scope of application has been changed (see Chapter 1, Chapter 1 of the.2009 edition); b) the normative reference to ISO 4166 has been deleted (see Chapter 1 of the.2009 edition); c) Added “Terms and Definitions” (see Chapter 3); d) added “Classification” (see Chapter 4); e) Added “General requirements” and test methods (see 5.1, 6.2); f) Added "safety requirements" and test methods (see 5.2, 6.3); g) Added the requirements and test methods for “structural requirement coefficient” (see 5.3 and 6.4); h) The requirements and test methods for wind resistance stability have been changed (see 5.4.1, 6.5.1 and 6.7 of the.2009 edition); i) Added requirements and test methods for stabilizing devices (see 5.4.2, 6.5.2~6.5.8); j) The requirements and test methods for “outer diameter of the channel circle” have been changed (see 5.5.1, 6.6.1, and 6.4 of the.2009 edition); k) The description and test method of the lifting range limit have been changed (see 5.5.3, 6.6.3, 3.1b of the.2009 edition); l) The description of the overall height requirement and the test method have been changed (see 5.5.4, 6.6.3, and 3.2 of the.2009 edition); m) Added the requirements and test methods for “quality parameters” (see 5.5.5 and 6.6.4); n) The maximum speed limit and continuous driving performance requirements and test methods have been changed (see 5.5.6, 6.6.5, 6.1 of the.2009 edition); o) Added minimum stable speed limit requirements and test methods (see 5.5.7 and 6.6.7); p) Added the requirements and test methods for “braking performance and braking operating force” (see 5.5.9, 5.5.11, 6.6.9 and 6.6.11); q) Added the requirements and test methods for “parking brake performance” (see 5.5.10 and 6.6.10); r) Added “Requirements for platform load-bearing sinkage” and test methods (see 5.6.2.7 and 6.7.2.7); s) Added requirements and test methods for “external lighting and light signaling devices” (see 5.7 and 6.8); t) Added “reliability” requirements and test methods (see 5.8 and 6.9); u) Added "Environmental requirements" and test methods (see 5.9, 6.10); v) Added "Environmental protection requirements" and test methods (see 5.10, 6.11); w) Added “Inspection Rules” (see Chapter 7); x) Added the requirements for “labels, signs and instruction manuals” (see Chapter 8); y) Added requirements for “packaging, transportation and storage” (see Chapter 9); z) Added the normative appendix “Special safety requirements and test methods for electric container loaders” (see Appendix B); aa) Added the normative appendix “Endurance test conditions” requirements (see Appendix C). Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document was proposed by the Civil Aviation Administration of China. This document is under the jurisdiction of the National Technical Committee for Standardization of Air Transport (SAC/TC 464). This document was drafted by. China Machinery Technology (Beijing) Vehicle Inspection Engineering Research Institute Co., Ltd. The main drafters of this document are Chen Yinghao, Zhao Cheng, Gao Chao, Wang Min and Jia Qi. The previous versions of this document and the documents it replaces are as follows. --First published in.2009 as GB/T 23420-2009; --This is the first revision. Aircraft cargo hold container loader1 ScopeThis document specifies the classification, technical requirements, test methods, inspection and Rules, labels, logos, instructions for use, packaging, transportation and storage. This document applies to the design, manufacture and inspection of container loaders used at civil airports.2 Normative referencesThe contents of the following documents constitute the essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document. GB/T 2408 Determination of the burning properties of plastics - Horizontal and vertical methods GB/T 2423.1 Environmental testing for electric and electronic products Part 2.Test methods Test A. Low temperature GB/T 2423.2 Environmental testing for electric and electronic products Part 2.Test methods Test B. High temperature GB/T 2423.3 Environmental testing Part 2.Test methods Test Cab. Steady state damp heat test GB 2893 Safety Colors GB/T 4094.2 Marking of electric vehicle controls, indicators and signal devices GB/T 4208 Enclosure protection degree (IP code) GB/T 9969 General principles for instructions for use of industrial products GB/T 12540 Measurement method for minimum turning diameter, minimum turning channel circle diameter and swing value of automobiles GB/T 12543 Automobile acceleration performance test method GB/T 12544 Test method for maximum speed of motor vehicles GB/T 12547 Test method for minimum stable speed of motor vehicles GB/T 12673 Measurement methods for main dimensions of automobiles GB/T 12674 Measurement methods for mass parameters of vehicles, trailers and vehicle trains GB/T 12678 Vehicle reliability driving test method GB/T 14436 General Principles for Industrial Product Warranty Documents GB 18384 Safety requirements for electric vehicles GB/T 18387 Limits and measurement methods for electromagnetic field emission intensity of electric vehicles GB/T 18488.1 Drive motor system for electric vehicles Part 1.Technical requirements GB/T 18849 Brake performance and component strength for powered industrial vehicles GB/T 19836 Electric vehicle instrumentation GB/T 20234.1-2023 Connection devices for conductive charging of electric vehicles Part 1.General requirements GB/T 20234.2-2015 Connection device for conductive charging of electric vehicles Part 2.AC charging interface GB/T 20234.3-2023 Connection device for conductive charging of electric vehicles Part 3.DC charging interface GB 20891 Emission limits and measurement methods for exhaust pollutants from diesel engines for non-road mobile machinery (China Phase III and IV) GB/T 27930-2023 Digital communication protocol between off-board conductive chargers and electric vehicles GB/T 32960.3 Technical Specification for Electric Vehicle Remote Service and Management System Part 3.Communication Protocol and Data Format ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 23420-2024_English be delivered?Answer: Upon your order, we will start to translate GB/T 23420-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 6 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 23420-2024_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 23420-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 23420-2024?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 23420-2024 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
