GB/T 2291-2016 English PDFUS$119.00 · In stock
Delivery: <= 2 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 2291-2016: Method for preparation of coal tar pitch specimens Status: Valid GB/T 2291: Historical versions
Basic dataStandard ID: GB/T 2291-2016 (GB/T2291-2016)Description (Translated English): Method for preparation of coal tar pitch specimens Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: G18 Classification of International Standard: 71.080 Word Count Estimation: 6,688 Date of Issue: 2016-12-13 Date of Implementation: 2017-07-01 Older Standard (superseded by this standard): GB/T 2291-1980 Regulation (derived from): National Standard Notice No.3716 of 2016 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China GB/T 2291-2016: Method for preparation of coal tar pitch specimens---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Method for preparing of coal tar pitch specimens ICS 71.080 G18 National Standards of People's Republic of China Replacing GB/T 2291-1980 Preparation method of coal tar pitch laboratory sample 2016-12-13 released 2017-07-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of the People 's Republic of China China National Standardization Management Committee released ForewordThis standard is drafted in accordance with the rules given in GB/T 1.1-2009. This standard replaces GB/T 2291-1980 "Preparation method of sample of coal tar pitch laboratory", this standard and GB/T 2291-1980 phase The main changes are as follows. --- modified the standard range; --- increase the normative reference documents; - in the equipment and equipment requirements, with the "sample tray" instead of "aluminum", "mortar" instead of "milk bowl", an increase of "standard sieve"; --- modified the steps. This standard is proposed by China Iron and Steel Industry Association. This standard by the National Coal Chemical Industry Standardization Technical Committee Coking Chemical Subcommittee (TC469/SC3) centralized. The drafting of this standard. Wuhan Iron and Steel (Group) Company, Metallurgical Industry Information Standards Institute. The main drafters of this standard. Liu Cuixia, Wang Lan, Zhang Zheng, Zheng Jingxu. This standard replaced the previous version of the standard release. --- GB/T 2291-1980. Preparation method of coal tar pitch laboratory sample1 ScopeThis standard specifies the equipment and equipment for the preparation of coal tar pitch laboratory samples and operating procedures. This standard applies to high-temperature coal tar by the processing of coal tar pitch products (coal tar pitch, modified asphalt, impregnant asphalt, etc.) laboratory test Like preparation.2 normative reference documentsThe following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article Pieces. For undated references, the latest edition (including all modifications) applies to this document. GB/T .2000 Coking solid sample sampling method3 instruments and equipment3.1 sample tray. 3.2 mortar. 3.3 blast oven. 3.4 standard sieve.4 operating procedures4.1 according to GB/T .2000 requirements sampling, 1kg, the size of 3mm below the coal tar pitch sample further shrink, remove about 100g placed in the sample Tray, the tile into a thickness of 3mm ~ 5mm. 4.2 Dry the coal tar pitch for at least 1 h in a (50 ± 2) ° C blast oven. 4.3 The dried coal tar sample was fractionated at about 25 g and ground with a mortar to less than 0.5 mm. As a measure of coal asphalt toluene insoluble , Quinoline insolubles and coking values. 4.4 The remaining 3 mm below the dry coal tar samples as a measure of coal tar pitch and softening point of the dry sample. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 2291-2016_English be delivered?Answer: Upon your order, we will start to translate GB/T 2291-2016_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 2 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 2291-2016_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 2291-2016_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 2291-2016?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 2291-2016 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
