GB/T 22037-2008 English PDF

US$149.00 · In stock
Delivery: <= 2 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 22037-2008: Bead fit test method for tube aircraft tyre -- Electrical
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 22037-2008	149	Add to Cart	2 days	Bead fit test method for tube aircraft tyre -- Electrical	Valid

Similar standards

GB/T 22038   GB/T 21910   GB/T 22391   GB/T 22039   

Basic data

Standard ID: GB/T 22037-2008 (GB/T22037-2008)
Description (Translated English): Bead fit test method for tube aircraft tyre -- Electrical
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: G41
Classification of International Standard: 83.160.20
Word Count Estimation: 5,530
Date of Issue: 2008-06-18
Date of Implementation: 2009-02-01
Adopted Standard: ISO 3324-2-1998, NEQ
Regulation (derived from): National Standard Approval Announcement 2008 No.10 (Total No.123)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the method of principle Airways tubeless tires ring fit test methods measuring method, test procedures, , reporting test results and test specimens, test equipment. This standard applies to all types of tubeless tire air pressure test bead fit.

GB/T 22037-2008: Bead fit test method for tube aircraft tyre -- Electrical

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Bead fit test method for tube aircraft tyre. Electrical ICS 83.160.20 G41 National Standards of People's Republic of China Air tubeless tire bead fit pressure test method Electrical measuring method (ISO 3324-2.1998, Aircrafttyresandrims- Part 2. Testmethodsfortyres, NEQ) Posted 2008-06-18 2009-02-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard and ISO 3324-2.1998 "Part 2 aircraft tire and rim. Test methods" of non-equivalent. The standard proposed by China Petroleum and Chemical Industry Association. This standard by the National Standardization Technical Committee aviation tires. This standard was drafted. Shuguang Rubber Industry Research and Design Institute. The main drafters. Zhang Ping. Air tubeless tire bead fit pressure test method Electrical measuring method

1 Scope

This standard specifies the method principle Aviation tubeless tire bead fit pressure test methods for electrical measuring method, test equipment, samples, test drive Order, test results and test report. This standard applies to all types of aviation tubeless tire bead fit pressure test.

2 principle of the method

This test is slowly filled with compressed air inside the test tire until the tire bead portion and the rim phase snug. Measuring dense seasonable Pressure inside the tire to determine the tire bead portion tightness meets the design requirements.

3 Test Equipment

3.1 rim. its specifications should match the size of the test tire, rim should have the lead after the site with other parts of the metal surface itself ON Electrically. 3.2 tire gauges. Indexing is not greater than 10kPa. 3.3 Thickness 0.05mm conductive metal sheet 6, size 10cm × 2cm. 3.4 Electrical insulating tape waterproof. 3.5 5V power supply, 5V LED one or a multimeter. 3.6 Several wires.

4 Sample

Where were bead fit pressure test aircraft tires, after vulcanization should be parked for more than 24h. Before the test, the test should remain in the laboratory tire stop Put to the test more than 3h.

5 test procedure

Rim contact part 5.1 rim should be cleaned so that the exposed metal surface. Do not use any lubricant on the bead or rim. 5.2 mounting the tire on the rim, three conductive metal sheet spaced 120 ° fixed on one side of the bead of the tire (see Figure 1), in addition Three conductive metal sheets are spaced 120 ° fixed on the other side of the tire bead. These metal sheets with electrical waterproof electrical tape, plastic With the conductive sheet metal and insulation parts of the rim. Insulating tape should open a notch shown in Figure 1, the tape gap size 7mm × 7mm, location In heel-vertical plane. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 22037-2008_English be delivered?

Answer: Upon your order, we will start to translate GB/T 22037-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 2 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 22037-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 22037-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.