GB/T 21504-2008 English PDFUS$229.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 21504-2008: 5.6mm Sporting rifle Status: Valid
Basic dataStandard ID: GB/T 21504-2008 (GB/T21504-2008)Description (Translated English): 5.6mm Sporting rifle Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: Y55 Classification of International Standard: 97.220.99 Word Count Estimation: 10,141 Date of Issue: 2008-03-10 Date of Implementation: 2008-05-01 Quoted Standard: GB/T 191; WJ/Z 204; WJ 298; WJ 1270 Regulation (derived from): National Standard Approval Announcement 2008 No.3 (Total No.116) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the 5. 6 mm rifle sport classification, requirements, test methods, inspection rules, signs, packaging, transport and storage and so on. This standard applies to 5. 6 mm sporting rifle manufacturing and acceptance. GB/T 21504-2008: 5.6mm Sporting rifle---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.5.6mm Sporting rifle ICS 97.220.99 Y55 National Standards of People's Republic of China 5.6 mm sporting rifle Posted 2008-03-10 2008-05-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThe standard proposed by China South Industries Group Corporation. The standard by the China Ordnance Industry Standardization Institute. This standard was drafted. Construction Industry (Group) Co., Ltd. The main drafters of this standard. GONG, Moudong Lin, Deng Ping, Gong Xiaoping, Yinzhi Wu, Liu Jia, Liu Yuanqiu. 5.6 mm sporting rifle1 ScopeThis standard specifies 5.6 mm rifle classification, requirements, test methods, inspection rules, marking, packaging, transport and storage and so on. This standard applies to 5.6 mm sporting rifle (hereinafter referred to as rifle) manufacture and acceptance.2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 191 Packaging - Pictorial signs (GB/T 191-2000, eqv ISO 780.1997) WJ/Z204 weapons VCI Packaging Guide WJ298 packing signs and symbols with fonts WJ1270 guns print product in mind and fonts3 Terms and DefinitionsThe following terms and definitions apply to this standard. 3.1 Use 5.6 mm long projectile motion using single manual loading mode, firearms structure may need to allow the International Shooting Federation competition rules in Adjusted within the allowable range with a rifle shooting competition. 3.2 10 bullets for a group when the intensity of the test firing, out playing the point of impact with the other nine rounds mean point of impact is greater than the distance He scattered nine rounds circle diameter projectile (bullet hole from the bullet hole and spread to the center circle diameter calculated) of bombs.4 ratingRifle shooting their intensity and competition is divided into grade level.5 Requirements5.1 Dimensions Rifle parts, components and assembly size dimensions shall comply with the requirements of product design. 5.2 Quality Rifle gun quality (including holder and made hand dryers and all the accessories). Women's rifle is not more than 6.5kg; men's rifle is not more than 8kg. 5.3 trigger gravitational Gravity should trigger adjustable adjustment range is. 0.5N ~ 1.5N. 5.4 appearance quality 5.4.1 Rifle appearance quality should be consistent with the provisions of the standard product design and sample parts. 5.4.2 surface roughness of the metal parts shall comply with the provisions of the product design, surface treated layer should be solid, uniform color, should not have spotted, abrasions, Scratches and other defects. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 21504-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 21504-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 21504-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 21504-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
