GB/T 20957.7-2007 English PDF

US$259.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 20957.7-2007: Test conditions for precision machining centre -- Part 7: Accuracy of a finished test piece
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 20957.7-2007	259	Add to Cart	3 days	Test conditions for precision machining centre -- Part 7: Accuracy of a finished test piece	Valid

Similar standards

GB/T 38193   JB/T 12396   JB/T 8490   GB/T 14660.1   GB/T 34880.3   GB/T 19362.2   

Basic data

Standard ID: GB/T 20957.7-2007 (GB/T20957.7-2007)
Description (Translated English): Test conditions for precision machining centre -- Part 7: Accuracy of a finished test piece
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J54
Classification of International Standard: 25.080.20
Word Count Estimation: 10,150
Date of Issue: 2007-06-25
Date of Implementation: 2007-11-01
Adopted Standard: ISO 10791-7-1998, MOD
Regulation (derived from): National Standard Announcement 2007 No.6 (Total No.106) (National-Standard-Commission)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the characteristics of finishing in under standard conditions specimen, dimensions and cutting tests. Assessment tools for cutting accuracy. This section applies to the linear axis stroke to 2 000 mm precision machining centers, linear axis travel greater than 2 000 mm precision machining center can also refer to the use.

GB/T 20957.7-2007: Test conditions for precision machining centre -- Part 7: Accuracy of a finished test piece

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Test conditions for precision machining centres Part 7. Accuracy of a finished test piece ICS 25.080.20 J54 National Standards of People's Republic of China Test conditions for precision machining centers Part 7. Finishing accuracy test specimen (ISO 10791-7.1998, MOD) Posted 2007-06-25 2007-11-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB/T 20957 "Test conditions for precision machining centers" is divided into ten parts. --- Part 1. horizontal spindle and with head Geometric tests for machines (horizontal Z-axis); Universal spindle head Geometric tests for machines (vertical Z-axis) or vertical with vertical primary rotary axis;. --- Part 2 --- Part 3. with horizontal rotary axis of the main spindle head overall universal Geometric tests for machines (vertical Z-axis); --- Part 4. positioning accuracy and linear and rotary axes repeatability test; --- Part 5. Clamp the workpiece pallet positioning accuracy and repeatability of positioning accuracy test; --- Part 6. feed rate, speed and accuracy test interpolation; --- Part 7. finishing accuracy test specimen; --- Part 8. Evaluation of the contouring performance in the three coordinate plane; --- Part 9. Evaluation of conversion tool changer and pallet operation time; --- Part 10. Evaluation of thermal deformation. This section GB/T Part of 720,957. The partial modification of the use of ISO 10791-7.1998 "Test conditions for machining centers - Part 7. Finishing accuracy test specimens" (in English). And ISO 10791-7.1998 compared to the main technical content of the following modifications. --- According to machine precision grade requirements, tolerance for all test items in ISO 10791-7.1998 on the basis of the compression (Except 9.6 roundness tolerance compression common ratio of 1.25, the rest are compressed common ratio 1.6). For ease of use, this section made the following editorial changes. --- "This standard" be replaced by "this section"; "." --- With a decimal point instead of a comma as the decimal point, ""; --- Title Chapter 3, "a brief description" to "General requirements"; --- Of ISO 10791-7.1998 and other international standards referenced with has been adopted as our national standard in place of the corresponding international standard; --- Remove the ISO 10791-7.1998 Foreword and Introduction; --- Remove the ISO 10791-7.1998 Annex A (informative). This part is proposed by China Machinery Industry Federation. This part of the National Metal Cutting Machine Standardization Technical Committee (SAC/TC22) centralized. This section is drafted. Beijing Institute of milling, Beijing Machine Tool Research Institute, National Chiao Tung University Kunming Machine Technology Co., Ltd., Zigong Changzheng Machine Tool has Limited liability company in the Czech Republic Machine Tool Co., Ltd. The main drafters of this section. Hu Ruilin, Lixiang Wen, Tang Qishou, Wang Xiaohui. Test conditions for precision machining centers Part 7. Finishing accuracy test specimen

1 Scope

This section provides standard specimen features, dimensions and finishing cutting test under the conditions used to assess the accuracy of the cutting machine. This section applies to linear axis stroke of 2000mm precision machining centers, linear axis travel greater than 2000mm precision plus Workers can also refer to the use of the center.

2 Normative references

The following documents contain provisions which, through reference GB/T 20957 in this section constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. GB/T 5342-2006 (all parts) indexable face mills GB/T 17421.1-1998 Test code for machine tools - Part 1. under no-load or finishing conditions Geometric accuracy of machines (Eqv ISO 230-1.1996)

3 General requirements

3.1 section all linear dimensions, tolerances and corresponding tolerances in millimeters; angle dimensions in degrees. 3.2 This section should reference GB/T 17421.1-1998, especially air transport precision testing before installation, and other components of the spindle Turn heat up, precision test methods, inspection tools. The order listed in section 3.3 of the test items, the order does not indicate the actual test, in order to facilitate assembly and disassembly and inspection tool inspection, press Test any order. 3.4 inspection tools, according to the structural characteristics must not test all of the items in this section. For the purpose of acceptance testing requirements, the Users can obtain the manufacturer agreed to choose some interesting test items, but these items must be clearly stated at the time of ordering the machine. Test tools specified in section 3.5 of example only. You can use the same amount of instructions and other inspection tools to at least the same accuracy. Indicators should have a 0.001mm or higher resolution. Type 4 test pieces It offers two types in this section, and each type has two specifications of the test piece. Type, size and marking specimens in Table 1. Table type, size and marking 1 specimen Type nominal size designation Contouring specimen Specimens GB/T 20957.7-A160 Specimens GB/T 20957.7-A320 End milling specimen Specimens GB/T 20957.7-B80 Specimens GB/T 20957.7-B160 In principle, at the time of acceptance of each specimen should be processed only one. In the case of special requirements, such as performance statistics assessed the machine, according to the system Factory-made and user agreement determines the number of specimens processed. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 20957.7-2007_English be delivered?

Answer: Upon your order, we will start to translate GB/T 20957.7-2007_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 20957.7-2007_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 20957.7-2007_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.