GB/T 20949-2007 English PDFUS$999.00 ยท In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 20949-2007: Prescription for installation of the lighting and light-signalling devices for wheeled agricultural and forestry tractors Status: Obsolete
Basic dataStandard ID: GB/T 20949-2007 (GB/T20949-2007)Description (Translated English): Prescription for installation of the lighting and light-signalling devices for wheeled agricultural and forestry tractors Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: T68 Classification of International Standard: 65.060.10 Word Count Estimation: 25,277 Date of Issue: 2007-06-25 Date of Implementation: 2007-11-01 Regulation (derived from): National Standard Announcement 2007 No.6 (Total No.106) (National-Standard-Commission) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the general technical requirements for wheeled tractors in lighting and light-signaling equipment installed, special requirements, test methods and inspection rules. This standard applies to engine power greater than 13. 24 kW wheeled agricultural and forestry tractors. GB/T 20949-2007: Prescription for installation of the lighting and light-signalling devices for wheeled agricultural and forestry tractors---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Prescription for installation of the lighting and light-signalling devices for wheeled agricultural and forestry tractors ICS 65.060.10 T68 National Standards of People's Republic of China Agricultural and forestry tractors Installation instructions lighting and light signaling devices Posted 2007-06-25 2007-11-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis standard is based on July 1, 1999 EU 78/933/EEC Directive "ontheapproximationofthelawsofthe alandforestrytractors "formulation. This compared with the EU standard 78/933/EEC Directive, specific technical differences are as follows. --- The standard name from "installation of lighting and light - signaling devices", "agricultural and forestry tractors for lighting and light signaling devices to the Installation instructions "; --- For ease of use, increased the term "longitudinal center plane" and "translucent surface" is defined; --- For the high beam lights and work with, the instruction is defined as "optional", this standard is defined as "to be equipped"; --- For front fog lamps with the instruction is not specified "must be equipped with" or "optional", this standard be defined as "optional"; --- For ease of use, the attachment EU 78/933/EEC Directive in Figure 3 to adjust the content of the standard (see Figure 1), and delete diagram --- Added "Test Method" provisions in Chapter 6; --- The EU regulation 78/933/EEC Directive Article 1.1, Chapter 2 and Chapter 5 rearrange to form this standard Chapter 7 The "type test." The Standard Appendix A, Appendix B, Appendix C is a normative appendix. The standard proposed by China Machinery Industry Federation. This standard by the National Standardization Technical Committee of the tractor. This standard was drafted. National Tractor Quality Supervision and Inspection Center, Fukuda Lovol International Heavy Industry Co., Ltd. The main drafters of this standard. Li Yong, Zhu Jinguang, Yue Qin, Yan Fang, Liu Lingwen. This standard was first formulated. Agricultural and forestry tractors Installation instructions lighting and light signaling devices1 ScopeThis standard specifies the general technical requirements for lighting and light signaling devices wheeled tractor installation, special requirements, test methods and inspection Rules. This standard applies to engine power greater than 13.24kW agriculture and forestry wheeled tractors.2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. ISO 1724.2003 Road vehicles - tractor and trailer with 7 12V12N (standard) electrical connector ISO 1185.2003 Road vehicles - tractor and trailer with 7 24V24N (standard) electrical connector3 DefinitionsThe following definitions apply to this standard. 3.1 Through the front and rear axle, the wheels on both sides from the center line or the ground on both sides of track center plane equidistant vertical plane. 3.2 Tractor longitudinal center plane perpendicular to the vertical plane. 3.3 Optional accessories did not take, but with a rollover protective device, coolant, lubricants, fuel, tools and lorry driver (driver quality 75kg) tractors. 3.4 Loaded to the maximum technical tractor manufacturer to determine the allowable load of quality of the tractor. Quality loaded, the manufacturer should be regulated Ref on each axis. 3.5 For illuminating the road (headlamp) or device emitted light signal to other road users. Rear registration plate lamps and reflectors are also lamps. 3.5.1 It has the same functionality, and approved by the competent authorities lamps. When the requirements of this standard, equivalent lamp may have a type-examination The lighting installation different characteristics. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 20949-2007_English be delivered?Answer: Upon your order, we will start to translate GB/T 20949-2007_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 20949-2007_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 20949-2007_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
