GB/T 20818.16-2023 English PDFUS$334.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 20818.16-2023: Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 16: Lists of properties(LOPs)for density measuring equipment for electronic data exchange Status: Valid
Basic dataStandard ID: GB/T 20818.16-2023 (GB/T20818.16-2023)Description (Translated English): Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 16: Lists of properties(LOPs)for density measuring equipment for electronic data exchange Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: N10 Classification of International Standard: 25.040 Word Count Estimation: 18,175 Date of Issue: 2023-12-28 Date of Implementation: 2024-07-01 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 20818.16-2023: Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 16: Lists of properties(LOPs)for density measuring equipment for electronic data exchange---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. ICS 25:040 CCSN10 National Standards of People's Republic of China Industrial process measurement and control Data structures and elements in the process equipment catalog Part 16: Density measuring equipment electronics Lists of properties (LOPs) for data exchange (IEC 61987-16:2016,IDT) Published on 2023-12-28 and implemented on 2024-07-01 State Administration for Market Regulation Released by the National Standardization Administration Committee Table of contentsPrefaceⅠ Introduction II 1 Scope 1 2 Normative references 2 3 Terms and Definitions 2 4 General 2 4:1 Overview 2 4:2 Description of OLOP and DLOP 2 4:3 Example of DLOP block usage 2 Appendix A (normative) OLOP 9 for density measuring equipment Appendix B (Normative) DLOP 10 for density measuring equipment B:1 Density transmitter (general) 10 B:2 Buoyancy density transmitter 10 B:3 Refractive index density transmitter 10 B:4 Vibrating tube density transmitter 10 B:5 Radiation density transmitter 10 B:6 Vibrating fork/rod density transmitter 10 B:7 Ultrasonic density transmitter 11 B:8 Microwave density transmitter 11 B:9 Stand-alone density transmitter11 Appendix C (Normative) Property Library 12 Appendix D (normative) Block libraries for relevant device types 13 Reference 14ForewordThis document complies with the provisions of GB/T 1:1-2020 "Standardization Work Guidelines Part 1: Structure and Drafting Rules of Standardization Documents" Drafting: This document is Part 16 of GB/T 20818 "Data structures and elements in catalogs of industrial process measurement and control process equipment": GB/T 20818 has released the following parts: ---Part 1: Measuring equipment with analog and digital outputs; ---Part 10: Basic principles of lists of properties (LOPs) for electronic data exchange for industrial process measurement and control; ---Part 11: General structure of attribute lists (LOPs) for electronic data exchange of measuring equipment; ---Part 12: List of attributes (LOPs) for electronic data exchange of flow measurement equipment; ---Part 13: List of properties (LOP) for electronic data exchange of pressure measuring equipment; ---Part 14: List of attributes for electronic data exchange of temperature measuring equipment (LOP); ---Part 15: List of attributes (LOPs) for electronic data exchange of level measuring equipment; ---Part 16: List of properties (LOPs) for electronic data exchange of density measuring equipment; ---Part 21: General structure of attribute list (LOP) for automatic valve electronic data exchange; ---Part 22: Valve body assembly attribute list (LOPs) for electronic data exchange: This document is equivalent to the data structure and elements in IEC 61987-16:2016 "Industrial Process Measurement and Control Process Equipment Catalog" Part 16: List of properties (LOPs) for electronic data exchange of density measuring equipment: Please note that some content in this document may be subject to patents: The publisher of this document assumes no responsibility for identifying patents: This document is proposed by China Machinery Industry Federation: This document is under the jurisdiction of the National Industrial Process Measurement Control and Automation Standardization Technical Committee (SAC/TC124): This document was drafted by: Xi'an Dingzheng Measurement and Control Technology Co:, Ltd:, Shenzhen Ertai Technology Co:, Ltd:, Jiangsu Jack Instrument Co:, Ltd:, Xiamen Yudian Automation Technology Co:, Ltd:, Shanghai Lige Instrument Co:, Ltd:, Anhui Tiankang (Group) Co:, Ltd:, Hangzhou Pangu Automatic Chemical Systems Co:, Ltd:, Xi'an Ruiheng Measurement and Control Equipment Co:, Ltd:, Chongqing Sichuan Instrument Automation Co:, Ltd:, Southwest University, Beijing Far East Instrument Co:, Ltd:, Chongqing Chongke Physical and Chemical Measurement Center Co:, Ltd:, Sichuan Huikeda Instrument Manufacturing Co:, Ltd:, Chongqing Changping Information Technology Co:, Ltd: Company, Comprehensive Technical and Economic Research Institute of Mechanical Industrial Instruments, Xiamen Anton Electronics Co:, Ltd:, Beijing Brady Instruments Co:, Ltd:, Wuhan Nankong Instrument Technology Co:, Ltd:, Shanghai Enbang Automation Instrument Co:, Ltd:, Hangzhou Meiyi Automation Technology Co:, Ltd:, Chongqing Xin'an Network Security Level Evaluation Co:, Ltd:, China Silian Instrument Group Co:, Ltd:, Chongqing Shulong Information Technology Co:, Ltd: Division, Chongqing Zongcan Technology Development Co:, Ltd:, Shanghai Luodingsen Industrial Automation Equipment Co:, Ltd: The main drafters of this document: Qu Kebing, Zheng Yanzhe, Min Xinyi, Jiang Jian, Chen Wenxian, Mao Wenwen, Ma Yongjun, Liu Ke, Huang Dong, Zou Mingwei, Yang Yang, Sun Hongquan, Liu Peng, Lan Ruoling, Guo Wei, Wang Chunxi, Xiao Guozhuan, Han Shuhua, Guan Rongtao, Zhang Peng, Qing Houyan, Wang Maozhong, Li Jinlan, Wu Long, Zhao Xiangqian, Wang Xujian, Zhang Peng, Huang Jian, Zhang Yu, Ren Jianxin, Hu Ming, Zhang Mina, Zhang Geng, Liu Feng, Zhang Xinguo, Sun Jie, Ye Yixi:IntroductionOnly when the information exchanged and the purpose of the information are clearly defined, the company, business systems, engineering tools, internal company data systems and Product data exchange between future control systems (electrical, measurement and control technology) can then proceed smoothly: In the past, users would make various requirements to suppliers or manufacturers when purchasing equipment, and suppliers would describe these equipment according to their Their own file formats, often using different terminology, structures and carriers (paper, databases, CD-ROMs, electronic catalogs, etc:): This situation and regulations Similar to some situations in the planning and development process, device information is often used in many different information technology systems: There are many types of equipment, each with different attributes (including equipment attributes and operating attributes, etc:): In order to record the equipment at one time, it is important to plan and order the equipment: As well as all necessary information in the later use process, all relevant parties should pay attention to these elements, and the GB/T 20818 series of standards are specially formulated to deal with Description of equipment and standardization of exchanged information: The GB/T 20818 series of standards proposes a standardization method that helps suppliers and users of measurement equipment optimize internal and Workflow between companies: Depending on the job or functional role in the process, engineering companies are considered either users or suppliers: This method passes the attribute The performance block specifies process control equipment: These attribute blocks are combined into attribute lists, each of which describes a specific device (device) type: This family of standards includes attributes that can be used for querying or proposing, as well as details needed to integrate the device into a computer system to perform other tasks: Detailed attributes: The GB/T 20818 series of standards is intended to consist of the following parts: ---Part 1: Measuring equipment with analog and digital outputs: Designed for specification of process measurement equipment with analog and digital outputs The purpose of defining a general structure and product feature set is to provide guidance for the formulation of standards for different types of process measurement equipment: ---Part 10: Basic principles of lists of properties (LOPs) for electronic data exchange for industrial process measurement and control: intended to stipulate The basic principles of Operational Attribute List (OLOP) for electronic data exchange of measuring equipment and the data model of OLOP are provided: ---Part 11: Common structure of attribute lists (LOPs) for electronic data exchange of measuring equipment: Designed to specify electronic measuring equipment Describes the general structure of a Device List of Properties (DLOP) for data exchange, and provides several important details: ---Part 12: List of properties (LOPs) for electronic data exchange of flow measurement equipment: Designed to specify electronic Operation attribute list (OLOP) and device attribute list (DLOP) are used for data exchange: ---Part 13: List of properties (LOP) for electronic data exchange of pressure measuring equipment: Designed to specify electronic numbers for pressure measuring equipment Operation attribute list (OLOP) and device attribute list (DLOP) are used for data exchange: ---Part 14: List of properties (LOP) for electronic data exchange of temperature measuring equipment: Designed to specify electronic numbers for temperature measuring equipment Operation attribute list (OLOP) and device attribute list (DLOP) are used for data exchange: ---Part 15: List of properties (LOPs) for electronic data exchange of level measuring equipment: Aims to specify electronic Operation attribute list (OLOP) and device attribute list (DLOP) are used for data exchange: ---Part 16: List of properties (LOPs) for electronic data exchange of density measuring equipment: Designed to specify electronic Operation attribute list (OLOP) and device attribute list (DLOP) are used for data exchange: ---Part 21: General structure of attribute list (LOP) for automatic valve electronic data exchange: Designed to provide for electronic data exchange for automatic valves Use the common structure of the Operational Attribute List (OLOP) and the Device Attribute List (DLOP) instead: ---Part 22: Common structure of property lists (LOPs) for valve body assembly electronic data exchange: Designed to specify electronics for valve body assemblies A common structure for operation attribute lists (OLOPs) and device attribute lists (DLOPs) for data exchange: This document relates to density measurement equipment: It provides a set of operating properties lists (OLOPs) for all types of density transmitters: this group OLOP can be used to request various quotes: This document also provides a Device List of Properties (DLOP) for various types of density transmitters: These DLOPs can be issued in different ways in the computer systems of equipment manufacturers and suppliers, CAE systems or EPC systems: play a role: The OLOPs and DLOPs provided in this document comply with the regulations of GB/T 20818:10 and IEC 61987-11: Industrial process measurement and control Data structures and elements in the process equipment catalog Part 16: Density measuring equipment electronics Lists of properties (LOPs) for data exchange1 ScopeThis document specifies: ---Operating Attribute List (OLOP) used to describe the set of requirements and operating parameters for density measurement equipment; ---Device Property List (DLOP) used to describe different density measurement device types: The structure of OLOP and DLOP conforms to the general structure defined in IEC 61987-11 and conforms to GB/T 20818:10-2017 Define the basic principles for building LOP: In addition to OLOP, other aspects required in the different electronic data exchange processes described in GB/T 20818:10-2017 will Published in IEC 61987-92: The attribute library and block library used by LOP in this document are listed in Appendix C and Appendix D respectively:2 Normative reference documentsThe contents of the following documents constitute essential provisions of this document through normative references in the text: Among them, the dated quotations For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to this document: GB/T 20818:10-2017 Industrial process measurement and control data structures and elements in process equipment catalogs Part 10 Points: Basic principles for lists of properties (LOPs) for electronic data exchange for industrial process measurement and control (IEC 61987-10:2009, IDT) Note: GB/T 17564:1-2011 Standard data element types and related classification schemas for electrical projects Part 1: Definition principles and methods (IEC 61360-1:2009,IDT) GB/T 17564:2-2013 Standard data element types and related classification modes for electrical components Part 2: EXPRES dictionary mode (IEC 61360-2:2012,IDT) GB/T 17564:3-1999 Standard data element types and related classification schemas for electrical components Part 3: Maintenance and validation procedures (eqv IEC 61360-3:1995) GB/T 17564:4-2009 Standard data element types and related classification patterns for electrical components Part 4: IEC standard data element types and component category benchmark set (IEC 61360-4:2005, IDT) GB/T 17564:6-2021 Standard data element types and related classification schemas for electrical components Part 6: IEC Common Data Dictionary (IEC CDD) Quality Guide (IEC 61360-6:2016, IDT) IEC 61987-11:2016 Data structures and elements in catalogs of process equipment for measurement and control of industrial processes Part 11: Measurement Note: GB/T 20818:11-2018 Data structures and elements in industrial process measurement and control process equipment catalogs Part 11: Measuring equipment electrical ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 20818.16-2023_English be delivered?Answer: Upon your order, we will start to translate GB/T 20818.16-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 20818.16-2023_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 20818.16-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
